[Fri Aug  9 17:36:29 2013] Detection parameters:
  Position = (405.4, 823.3) = 9 58 26.93 2 22 50.9
  Extent = 1.2" x 0.8", rotation angle = 126 degrees
  Source counts = 31.2 +/- 5.7
  Background counts = 1.8
  Rate = 0.0006 +/- 0.0001

[Fri Aug  9 17:36:29 2013] Off-axis axis estimate = 5.42'
[Fri Aug  9 18:30:59 2013] Using EEF radius (= 1.36 ")to estimate initial spatial extent for simple fitting
[Fri Aug  9 18:30:59 2013] Initial guess for spatial extent in simple fitting = 1.36"
[Fri Aug  9 18:30:59 2013] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.156
[Fri Aug  9 18:30:59 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 1.36"
[Fri Aug  9 18:52:03 2013] fullrun_ccd2_acisf15242_pi14-548_cl_pass0_src8.ximg exists
[Fri Aug  9 18:52:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15242_pi14-548_cl_pass0_src8.csv
[Fri Aug  9 18:52:03 2013] fullrun_ccd2_acisf15242_pi14-548_cl_pass0_src8_1.ximg exists
[Fri Aug  9 18:52:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15242_pi14-548_cl_pass0_src8.csv
[Fri Aug  9 18:52:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15242_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15242_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  9 18:52:03 2013] fullrun_ccd2_acisf15242_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Fri Aug  9 18:52:03 2013] fullrun_ccd2_acisf15242_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Aug  9 18:52:03 2013] Fit fullrun_ccd2_acisf15242_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Aug  9 19:07:20 2013] Spatial fit model total counts = 29.178600, observed total counts = 35.000000
[Fri Aug  9 19:07:20 2013] Offset between fit and detection position for source 15 = 2.202743 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 2.202743 pixels
  Position = (404.5, 825.3) = 9 58 26.97 2 22 51.6
  Extent = 1.9 (1.5-2.7)" x 0.8 (0.5-1.1)", rotation angle = 79 (61-93) degrees
  Source counts = 29.2 +/- 5.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Fri Aug  9 19:07:20 2013] Vigneting correction estimate = 1.000000
[Fri Aug  9 19:07:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  9 19:07:20 2013] Assessing source extent using major axis lower bound
[Fri Aug  9 19:07:20 2013] Source does appear to be extended
[Fri Aug  9 19:07:20 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38
[Fri Aug  9 20:15:30 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  9 20:15:30 2013] Initial guess for spatial extent in simple fitting = 1.37"
[Fri Aug  9 20:15:30 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.132
[Fri Aug  9 20:15:30 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 1.37"
[Fri Aug  9 20:34:33 2013] fullrun_ccd2_acisf15242_pi14-548_cl_pass1_src8.ximg exists
[Fri Aug  9 20:34:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15242_pi14-548_cl_pass1_src8.csv
[Fri Aug  9 20:34:33 2013] fullrun_ccd2_acisf15242_pi14-548_cl_pass1_src8_1.ximg exists
[Fri Aug  9 20:34:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15242_pi14-548_cl_pass1_src8.csv
[Fri Aug  9 20:34:33 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15242_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15242_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  9 20:34:33 2013] fullrun_ccd2_acisf15242_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Fri Aug  9 20:34:33 2013] fullrun_ccd2_acisf15242_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Aug  9 20:34:33 2013] Fit fullrun_ccd2_acisf15242_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Aug  9 20:47:22 2013] Spatial fit model total counts = 31.147400, observed total counts = 33.000000
[Fri Aug  9 20:47:22 2013] Offset between fit and detection position for source 15 = 1.747388 pixels
[Fri Aug  9 20:47:22 2013] 32.314930 total counts/ 8.672930 bgd. counts: snr = 8.027888
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.747388 pixels
  Position = (405.2, 823.7) = 9 58 26.95 2 22 50.8
  Extent = 1.1 (0.7-1.3)", rotation angle = 0
  Source counts = 23.6 +/- 5.7
  Background counts = 8.7
  Rate = 0.0005 +/- 0.0001
[Fri Aug  9 20:47:22 2013] Vigneting correction estimate = 1.000000
[Fri Aug  9 20:47:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  9 20:47:22 2013] Assessing source extent using major axis lower bound
[Fri Aug  9 20:47:22 2013] Source does appear to be extended
[Fri Aug  9 20:47:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  9 21:05:21 2013] Writing source region out to fullrun_ccd2_acisf15242_pi14-548_pass1_cl_src15_src.reg
[Fri Aug  9 21:05:21 2013] Extracting stamp from image fullrun_ccd2_acisf15242_pi14-548_cl_sm2.00.img.gz, (357, 775) - (454, 872)
[Fri Aug  9 21:05:21 2013] Writing fullrun_ccd2_acisf15242_pi14-548_pass1_cl_src15.gif
[Fri Aug  9 21:09:43 2013] Size of ../../acisf15242/products/events/fullrun_ccd2_acisf15242_pi14-548_pass1_cl_src15_src.evt.gz[events] = 34 counts
[Fri Aug  9 21:09:43 2013] Mean chipx,y = (684.18, 759.94)
[Fri Aug  9 21:09:43 2013] Mean tdetx,y = (3820.94, 3401.82)
[Fri Aug  9 21:09:43 2013] chipx,y range = (668.00-702.00, 737.00-777.00)
[Fri Aug  9 21:09:43 2013] Size of ../../acisf15242/products/events/fullrun_ccd2_acisf15242_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 20 counts
[Fri Aug  9 21:09:44 2013] Not generating rmf since there are only 23 counts
[Fri Aug  9 21:09:44 2013] arf not found, will run specextract
[Fri Aug  9 21:10:12 2013] ../../acisf15242/products/spectra/fullrun_ccd2_acisf15242_pi14-548_pass1_cl_src15.warf not found
[Fri Aug  9 21:10:12 2013] ../../acisf15242/products/spectra/fullrun_ccd2_acisf15242_pi14-548_pass1_cl_src15.wrmf not found
[Fri Aug  9 21:10:12 2013] Removal of ../../acisf15242/products/spectra/fullrun_ccd2_acisf15242_pi14-548_pass1_cl_src15.soff failed
[Fri Aug  9 21:17:56 2013] Spectrum 15 has only 24 counts, deleting rmf
[Fri Aug  9 21:17:56 2013] 157.257
[Fri Aug  9 21:26:43 2013] Updating aperture counts using extracted products
[Fri Aug  9 21:26:43 2013] Total counts from fullrun_ccd2_acisf15242_pi14-548_pass1_cl_src15_src.pi.gz = 34.00
[Fri Aug  9 21:26:43 2013] Total counts from fullrun_ccd2_acisf15242_pi14-548_pass1_cl_src15_bgd.pi.gz = 20.00
[Fri Aug  9 21:26:43 2013] Got source and background scale factors 0.000003, 0.000041
[Fri Aug  9 21:26:43 2013] User source parameters:
  Position = (405.2, 823.7) = 9 58 26.95 2 22 50.8
  Extent = 1.1 (0.7-1.3)", rotation angle = 0
  Source aperture counts = 32.3 +/- 6.9
  Background aperture counts = 1.7
  Rate = 0.0007 +/- 0.0001

[Fri Aug  9 21:26:45 2013] Calculating source flux in energy range 0.30-8.00
[Fri Aug  9 21:26:45 2013] Using photon index=1.80, rate=0.000478, arf fullrun_ccd2_acisf15242_pi14-548_pass1_cl_src15.arf
[Fri Aug  9 21:26:45 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Aug  9 21:26:45 2013] Updating source flux to 7.2e-15
[Fri Aug  9 21:26:58 2013] Source 15 has fewer than 100.000000 counts, skipping spectral fitting