[Thu Jun 27 15:27:40 2013] Detection parameters:
  Position = (717.4, 261.8) = 10 1 45.59 2 42 13.1
  Extent = 0.7" x 0.5", rotation angle = 90 degrees
  Source counts = 17.2 +/- 4.2
  Background counts = 0.8
  Rate = 0.0003 +/- 9e-05

[Thu Jun 27 15:27:41 2013] Off-axis axis estimate = 4.55'
[Thu Jun 27 16:33:27 2013] Using EEF radius (= 1.01 ")to estimate initial spatial extent for simple fitting
[Thu Jun 27 16:33:27 2013] Initial guess for spatial extent in simple fitting = 1.01"
[Thu Jun 27 16:33:27 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.958
[Thu Jun 27 16:33:27 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 1.01"
[Thu Jun 27 17:09:03 2013] fullrun_ccd3_acisf15236_pi14-548_cl_pass0_src19.ximg exists
[Thu Jun 27 17:09:03 2013] fullrun_ccd3_acisf15236_pi14-548_cl_pass0_src19_1.ximg exists
[Thu Jun 27 17:09:03 2013] Fit fullrun_ccd3_acisf15236_pi14-548_cl_pass0_src19 appears to have run properly
[Thu Jun 27 17:09:03 2013] fullrun_ccd3_acisf15236_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Thu Jun 27 17:09:03 2013] fullrun_ccd3_acisf15236_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Jun 27 17:09:03 2013] Fit fullrun_ccd3_acisf15236_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Jun 27 17:09:13 2013] Spatial fit model total counts = 20.008900, observed total counts = 20.000000
[Thu Jun 27 17:09:13 2013] Offset between fit and detection position for source 2 = 0.562386 pixels
[Thu Jun 27 17:09:13 2013] 19.769360 total counts/ 2.944460 bgd. counts: snr = 9.805047
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.562386 pixels
  Position = (717.7, 262.3) = 10 1 45.59 2 42 13.1
  Extent = 0.9 (0.7-1.4)" x 0.3 (0.3-0.4)", rotation angle = 91 (81-102) degrees
  Source counts = 16.8 +/- 4.4
  Background counts = 2.9
  Rate = 0.0003 +/- 9e-05
[Thu Jun 27 17:09:13 2013] Vigneting correction estimate = 1.000000
[Thu Jun 27 17:09:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 27 17:09:13 2013] Assessing source extent using major axis lower bound
[Thu Jun 27 17:09:13 2013] Source does appear to be extended
[Thu Jun 27 17:09:13 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.65
[Thu Jun 27 17:09:13 2013] Source is asymmetric
[Thu Jun 27 18:08:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 27 18:08:59 2013] Initial guess for spatial extent in simple fitting = 0.60"
[Thu Jun 27 18:08:59 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.766
[Thu Jun 27 18:08:59 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 0.60"
[Thu Jun 27 18:37:05 2013] fullrun_ccd3_acisf15236_pi14-548_cl_pass1_src19.ximg exists
[Thu Jun 27 18:37:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15236_pi14-548_cl_pass1_src19.csv
[Thu Jun 27 18:37:05 2013] fullrun_ccd3_acisf15236_pi14-548_cl_pass1_src19_1.ximg exists
[Thu Jun 27 18:37:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15236_pi14-548_cl_pass1_src19.csv
[Thu Jun 27 18:37:05 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15236_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15236_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 18:37:05 2013] fullrun_ccd3_acisf15236_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Thu Jun 27 18:37:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15236_pi14-548_cl_pass1_tfrozen_src19.csv
[Thu Jun 27 18:37:05 2013] fullrun_ccd3_acisf15236_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Jun 27 18:37:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15236_pi14-548_cl_pass1_tfrozen_src19.csv
[Thu Jun 27 18:37:05 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15236_pi14-548_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15236_pi14-548_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 18:37:16 2013] Spatial fit model total counts = 16.784300, observed total counts = 19.000000
[Thu Jun 27 18:37:16 2013] Offset between fit and detection position for source 2 = 0.114698 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.114698 pixels
  Position = (717.7, 262.4) = 10 1 45.59 2 42 13.2
  Extent = 1.0 (0.7-1.4)" x 0.3 (0.2-0.4)", rotation angle = 90 (80-100) degrees
  Source counts = 16.8 +/- 4.1
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Thu Jun 27 18:37:16 2013] Vigneting correction estimate = 1.000000
[Thu Jun 27 18:37:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 27 18:37:16 2013] Assessing source extent using major axis lower bound
[Thu Jun 27 18:37:16 2013] Source does appear to be extended
[Thu Jun 27 18:37:16 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.84
[Thu Jun 27 18:37:16 2013] Source is asymmetric
[Thu Jun 27 19:04:37 2013] Writing source region out to fullrun_ccd3_acisf15236_pi14-548_pass1_cl_src2_src.reg
[Thu Jun 27 19:04:37 2013] Extracting stamp from image fullrun_ccd3_acisf15236_pi14-548_cl_sm2.00.img.gz, (674, 219) - (761, 306)
[Thu Jun 27 19:04:37 2013] Writing fullrun_ccd3_acisf15236_pi14-548_pass1_cl_src2.gif
[Thu Jun 27 19:14:55 2013] Size of ../../acisf15236/products/events/fullrun_ccd3_acisf15236_pi14-548_pass1_cl_src2_src.evt.gz[events] = 17 counts
[Thu Jun 27 19:14:55 2013] Mean chipx,y = (401.59, 910.18)
[Thu Jun 27 19:14:55 2013] Mean tdetx,y = (4221.82, 3462.59)
[Thu Jun 27 19:14:55 2013] chipx,y range = (383.00-419.00, 889.00-927.00)
[Thu Jun 27 19:14:55 2013] Size of ../../acisf15236/products/events/fullrun_ccd3_acisf15236_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 19 counts
[Thu Jun 27 19:14:56 2013] Not generating rmf since there are only 16 counts
[Thu Jun 27 19:14:56 2013] arf not found, will run specextract
[Thu Jun 27 19:15:25 2013] ../../acisf15236/products/spectra/fullrun_ccd3_acisf15236_pi14-548_pass1_cl_src2.warf not found
[Thu Jun 27 19:15:25 2013] ../../acisf15236/products/spectra/fullrun_ccd3_acisf15236_pi14-548_pass1_cl_src2.wrmf not found
[Thu Jun 27 19:15:25 2013] Removal of ../../acisf15236/products/spectra/fullrun_ccd3_acisf15236_pi14-548_pass1_cl_src2.soff failed
[Thu Jun 27 19:20:23 2013] Spectrum 2 has only 17 counts, deleting rmf
[Thu Jun 27 19:20:23 2013] 181.691
[Thu Jun 27 19:20:36 2013] Updating aperture counts using extracted products
[Thu Jun 27 19:20:36 2013] Total counts from fullrun_ccd3_acisf15236_pi14-548_pass1_cl_src2_src.pi.gz = 17.00
[Thu Jun 27 19:20:36 2013] Total counts from fullrun_ccd3_acisf15236_pi14-548_pass1_cl_src2_bgd.pi.gz = 19.00
[Thu Jun 27 19:20:36 2013] Got source and background scale factors 0.000001, 0.000033
[Thu Jun 27 19:20:36 2013] User source parameters:
  Position = (717.7, 262.4) = 10 1 45.59 2 42 13.2
  Extent = 1.0 (0.7-1.4)" x 0.3 (0.2-0.4)", rotation angle = 90 (80-100) degrees
  Source aperture counts = 16.5 +/- 5.2
  Background aperture counts = 0.5
  Rate = 0.0003 +/- 0.0001

[Thu Jun 27 19:20:37 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 27 19:20:37 2013] Using photon index=1.80, rate=0.00034, arf fullrun_ccd3_acisf15236_pi14-548_pass1_cl_src2.arf
[Thu Jun 27 19:20:37 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jun 27 19:20:37 2013] Updating source flux to 4.5e-15
[Thu Jun 27 19:20:47 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting