[Sun Oct 23 03:11:30 2011] Detection parameters:
  Position = (98.0, 611.3) = 18 43 57.14 -4 7 42.4
  Extent = 1.1" x 0.5", rotation angle = 44 degrees
  Source counts = 13.0 +/- 3.9
  Background counts = 2.0
  Rate = 0.0002 +/- 7e-05

[Sun Oct 23 03:11:32 2011] Off-axis axis estimate = 3.18'
[Sun Oct 23 03:12:38 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 03:12:38 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sun Oct 23 03:12:38 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.972
[Sun Oct 23 03:12:38 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.62"
[Sun Oct 23 03:12:39 2011] fullrun_ccd3_acisf01523_pi14-548_cl_pass0_src18.ximg exists
[Sun Oct 23 03:12:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01523_pi14-548_cl_pass0_src18.csv
[Sun Oct 23 03:12:39 2011] fullrun_ccd3_acisf01523_pi14-548_cl_pass0_src18_1.ximg exists
[Sun Oct 23 03:12:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01523_pi14-548_cl_pass0_src18.csv
[Sun Oct 23 03:12:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01523_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01523_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 03:12:39 2011] fullrun_ccd3_acisf01523_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Sun Oct 23 03:12:39 2011] fullrun_ccd3_acisf01523_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Oct 23 03:12:39 2011] Fit fullrun_ccd3_acisf01523_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Sun Oct 23 03:12:56 2011] Source 18 is offset by -1.269597 and -1.392490 pixels which is larger than
2 X fitted extent = 5.138444 x 0.652923, not incorporating fit results
[Sun Oct 23 03:12:56 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 03:12:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 03:12:56 2011] Assessing source extent using major
[Sun Oct 23 03:12:56 2011] Source does appear to be extended
[Sun Oct 23 03:12:56 2011] Computing asymmetry using major and minor axis, asym = 2.18
[Sun Oct 23 03:12:56 2011] Source is asymmetric
[Sun Oct 23 03:13:23 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 03:13:23 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sun Oct 23 03:13:23 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.972
[Sun Oct 23 03:13:23 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.62"
[Sun Oct 23 03:13:24 2011] fullrun_ccd3_acisf01523_pi14-548_cl_pass1_src18.ximg exists
[Sun Oct 23 03:13:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01523_pi14-548_cl_pass1_src18.csv
[Sun Oct 23 03:13:24 2011] fullrun_ccd3_acisf01523_pi14-548_cl_pass1_src18_1.ximg exists
[Sun Oct 23 03:13:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01523_pi14-548_cl_pass1_src18.csv
[Sun Oct 23 03:13:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01523_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01523_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 03:13:25 2011] fullrun_ccd3_acisf01523_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Sun Oct 23 03:13:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01523_pi14-548_cl_pass1_tfrozen_src18.csv
[Sun Oct 23 03:13:25 2011] fullrun_ccd3_acisf01523_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Oct 23 03:13:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01523_pi14-548_cl_pass1_tfrozen_src18.csv
[Sun Oct 23 03:13:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01523_pi14-548_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01523_pi14-548_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 03:13:39 2011] Spatial fit model total counts = 15.521100, observed total counts = 19.000000
[Sun Oct 23 03:13:39 2011] Offset between fit and detection position for source 18 = 2.322407 pixels
[Sun Oct 23 03:13:39 2011] 14.273920 total counts/ 3.222820 bgd. counts: snr = 6.155842
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 2.322407 pixels
  Position = (99.6, 612.9) = 18 43 57.10 -4 7 41.9
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 11.1 +/- 3.8
  Background counts = 3.2
  Rate = 0.0002 +/- 7e-05
[Sun Oct 23 03:13:39 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 03:13:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 03:13:39 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 03:13:39 2011] Source does appear to be extended
[Sun Oct 23 03:13:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 03:18:49 2011] Not overwriting source region fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18_src.reg
[Sun Oct 23 03:18:49 2011] Extracting stamp from image fullrun_ccd3_acisf01523_pi14-548_cl_sm2.00.img.gz, (68, 581) - (131, 645)
[Sun Oct 23 03:18:49 2011] Writing fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18.gif
[Sun Oct 23 03:28:02 2011] ../../acisf01523/products/events/fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18_src.evt and ../../acisf01523/products/events/fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sun Oct 23 03:28:02 2011] Size of ../../acisf01523/products/events/fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18_src.evt.gz[events] = 13 counts
[Sun Oct 23 03:28:02 2011] Mean chipx,y = (998.69, 606.00)
[Sun Oct 23 03:28:02 2011] Mean tdetx,y = (4526.00, 4059.69)
[Sun Oct 23 03:28:02 2011] chipx,y range = (982.00-1017.00, 595.00-622.00)
[Sun Oct 23 03:28:02 2011] Size of ../../acisf01523/products/events/fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 30 counts
[Sun Oct 23 03:28:02 2011] ../../acisf01523/products/images/fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18_src.img and ../../acisf01523/products/images/fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Sun Oct 23 03:28:02 2011] Not generating rmf since there are only 11 counts
[Sun Oct 23 03:28:02 2011] arf not found, will run specextract
[Sun Oct 23 03:28:32 2011] ../../acisf01523/products/spectra/fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18.warf not found
[Sun Oct 23 03:28:32 2011] ../../acisf01523/products/spectra/fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18.wrmf not found
[Sun Oct 23 03:28:32 2011] Removal of ../../acisf01523/products/spectra/fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18.soff failed
[Sun Oct 23 03:28:38 2011] ../../acisf01523/products/lightcurves/fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18_src.lc and ../../acisf01523/products/lightcurves/fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sun Oct 23 03:41:44 2011] Spectrum 18 has only 11 counts, deleting rmf
[Sun Oct 23 03:41:44 2011] 205.508
[Sun Oct 23 03:41:54 2011] Updating aperture counts using extracted products
[Sun Oct 23 03:41:54 2011] Error reading totcts from fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18_src.pi.gz
[Sun Oct 23 03:41:54 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 03:41:54 2011] Using photon index=1.80, rate=0.000191, arf fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18.arf
[Sun Oct 23 03:41:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 03:41:54 2011] Updating source flux to 3.1e-15
[Sun Oct 23 03:42:12 2011] Flag b found in src. 18 procflags, skipping spectral fitting
[Sun Oct 23 03:42:12 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 23 03:42:13 2011] acisf01523/analysis//spectral/fullrun_ccd3_acisf01523_pi14-548_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete