[Sun Oct 23 03:11:27 2011] Detection parameters:
  Position = (512.2, 316.0) = 18 43 48.65 -4 1 36.5
  Extent = 0.8" x 0.5", rotation angle = 115 degrees
  Source counts = 79.2 +/- 9.1
  Background counts = 2.8
  Rate = 0.001 +/- 0.0002

[Sun Oct 23 03:11:29 2011] Off-axis axis estimate = 3.78'
[Sun Oct 23 03:12:36 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 03:12:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 03:12:36 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Sun Oct 23 03:12:36 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.946
[Sun Oct 23 03:12:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.77"
[Sun Oct 23 03:12:36 2011] fullrun_ccd2_acisf01523_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 23 03:12:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01523_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 03:12:36 2011] fullrun_ccd2_acisf01523_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 23 03:12:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01523_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 03:12:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01523_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01523_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 03:12:37 2011] fullrun_ccd2_acisf01523_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 23 03:12:37 2011] fullrun_ccd2_acisf01523_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 23 03:12:37 2011] Fit fullrun_ccd2_acisf01523_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 23 03:12:52 2011] Spatial fit model total counts = 83.044100, observed total counts = 84.000000
[Sun Oct 23 03:12:52 2011] Offset between fit and detection position for source 15 = 0.813290 pixels
[Sun Oct 23 03:12:52 2011] 82.595750 total counts/ 5.458850 bgd. counts: snr = 33.015023
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.813290 pixels
  Position = (512.7, 316.7) = 18 43 48.65 -4 1 36.4
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 77.1 +/- 9.1
  Background counts = 5.5
  Rate = 0.001 +/- 0.0002
[Sun Oct 23 03:12:52 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 03:12:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 03:12:52 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 03:12:52 2011] Source does appear to be extended
[Sun Oct 23 03:12:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 03:13:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 03:13:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 03:13:21 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Sun Oct 23 03:13:21 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.014
[Sun Oct 23 03:13:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.73"
[Sun Oct 23 03:13:22 2011] fullrun_ccd2_acisf01523_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 23 03:13:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01523_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 03:13:22 2011] fullrun_ccd2_acisf01523_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 23 03:13:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01523_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 03:13:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01523_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01523_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 03:13:23 2011] fullrun_ccd2_acisf01523_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 23 03:13:23 2011] fullrun_ccd2_acisf01523_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 23 03:13:23 2011] Fit fullrun_ccd2_acisf01523_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 23 03:13:37 2011] Spatial fit model total counts = 80.751600, observed total counts = 84.000000
[Sun Oct 23 03:13:37 2011] Offset between fit and detection position for source 15 = 0.075818 pixels
[Sun Oct 23 03:13:37 2011] 79.846942 total counts/ 0.260142 bgd. counts: snr = 156.039951
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.075818 pixels
  Position = (512.6, 316.8) = 18 43 48.66 -4 1 36.4
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 79.6 +/- 8.9
  Background counts = 0.3
  Rate = 0.001 +/- 0.0002
[Sun Oct 23 03:13:37 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 03:13:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 03:13:37 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 03:13:37 2011] Source does appear to be extended
[Sun Oct 23 03:13:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 03:16:34 2011] Not overwriting source region fullrun_ccd2_acisf01523_pi14-548_pass1_cl_src15_src.reg
[Sun Oct 23 03:16:34 2011] Extracting stamp from image fullrun_ccd2_acisf01523_pi14-548_cl_sm2.00.img.gz, (479, 283) - (546, 350)
[Sun Oct 23 03:16:34 2011] Writing fullrun_ccd2_acisf01523_pi14-548_pass1_cl_src15.gif
[Sun Oct 23 03:16:37 2011] ../../acisf01523/products/events/fullrun_ccd2_acisf01523_pi14-548_pass1_cl_src15_src.evt and ../../acisf01523/products/events/fullrun_ccd2_acisf01523_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sun Oct 23 03:16:38 2011] Size of ../../acisf01523/products/events/fullrun_ccd2_acisf01523_pi14-548_pass1_cl_src15_src.evt.gz[events] = 81 counts
[Sun Oct 23 03:16:38 2011] Mean chipx,y = (396.21, 766.89)
[Sun Oct 23 03:16:38 2011] Mean tdetx,y = (3827.89, 3689.79)
[Sun Oct 23 03:16:38 2011] chipx,y range = (374.00-413.00, 746.00-785.00)
[Sun Oct 23 03:16:38 2011] Size of ../../acisf01523/products/events/fullrun_ccd2_acisf01523_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 22 counts
[Sun Oct 23 03:16:38 2011] ../../acisf01523/products/images/fullrun_ccd2_acisf01523_pi14-548_pass1_cl_src15_src.img and ../../acisf01523/products/images/fullrun_ccd2_acisf01523_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Sun Oct 23 03:16:38 2011] ../../acisf01523/products/spectra/fullrun_ccd2_acisf01523_pi14-548_pass1_cl_src15_src.pi and ../../acisf01523/products/spectra/fullrun_ccd2_acisf01523_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sun Oct 23 03:16:38 2011] Not generating rmf since there are only 79 counts
[Sun Oct 23 03:16:41 2011] ../../acisf01523/products/lightcurves/fullrun_ccd2_acisf01523_pi14-548_pass1_cl_src15_src.lc and ../../acisf01523/products/lightcurves/fullrun_ccd2_acisf01523_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sun Oct 23 03:18:47 2011] 196.702
[Sun Oct 23 03:41:53 2011] Updating aperture counts using extracted products
[Sun Oct 23 03:41:53 2011] Error reading totcts from fullrun_ccd2_acisf01523_pi14-548_pass1_cl_src15_src.pi.gz
[Sun Oct 23 03:41:53 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 03:41:53 2011] Using photon index=1.80, rate=0.00138, arf fullrun_ccd2_acisf01523_pi14-548_pass1_cl_src15.arf
[Sun Oct 23 03:41:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 03:41:53 2011] Updating source flux to 2.4e-14
[Sun Oct 23 03:42:11 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 23 03:42:12 2011] acisf01523/analysis//spectral/fullrun_ccd2_acisf01523_pi14-548_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete