[Sun Oct 23 03:11:21 2011] Detection parameters:
  Position = (547.6, 1025.3) = 18 44 21.09 -3 57 7.2
  Extent = 3.6" x 2.8", rotation angle = 115 degrees
  Source counts = 152.8 +/- 14.0
  Background counts = 43.2
  Rate = 0.003 +/- 0.0002

[Sun Oct 23 03:11:22 2011] Off-axis axis estimate = 9.35'
[Sun Oct 23 03:12:33 2011] Using EEF radius (= 3.87 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 03:12:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 03:12:33 2011] Initial guess for spatial extent in simple fitting = 3.87"
[Sun Oct 23 03:12:33 2011] source mask rpix=7.9, npix_max = 279, mask sum = 289, frac = 1.033
[Sun Oct 23 03:12:33 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.87"
[Sun Oct 23 03:12:33 2011] fullrun_ccd0_acisf01523_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 23 03:12:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01523_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 03:12:33 2011] fullrun_ccd0_acisf01523_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 23 03:12:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01523_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 03:12:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01523_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01523_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 03:12:33 2011] fullrun_ccd0_acisf01523_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 23 03:12:34 2011] fullrun_ccd0_acisf01523_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 23 03:12:34 2011] Fit fullrun_ccd0_acisf01523_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 23 03:12:47 2011] Spatial fit model total counts = 226.852000, observed total counts = 230.000000
[Sun Oct 23 03:12:47 2011] Offset between fit and detection position for source 1 = 1.229552 pixels
[Sun Oct 23 03:12:47 2011] 226.712800 total counts/ 82.869800 bgd. counts: snr = 15.801219
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.229552 pixels
  Position = (547.9, 1026.5) = 18 44 21.10 -3 57 6.9
  Extent = 3.0 (2.5-3.4)", rotation angle = 0
  Source counts = 143.8 +/- 15.1
  Background counts = 82.9
  Rate = 0.002 +/- 0.0003
[Sun Oct 23 03:12:47 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 03:12:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 03:12:47 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 03:12:47 2011] Source does appear to be extended
[Sun Oct 23 03:12:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 03:13:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 03:13:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 03:13:18 2011] Initial guess for spatial extent in simple fitting = 2.96"
[Sun Oct 23 03:13:18 2011] source mask rpix=6.0, npix_max = 169, mask sum = 169, frac = 0.997
[Sun Oct 23 03:13:18 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.96"
[Sun Oct 23 03:13:19 2011] fullrun_ccd0_acisf01523_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 23 03:13:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01523_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 03:13:19 2011] fullrun_ccd0_acisf01523_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 23 03:13:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01523_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 03:13:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01523_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01523_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 03:13:19 2011] fullrun_ccd0_acisf01523_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 23 03:13:19 2011] fullrun_ccd0_acisf01523_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 23 03:13:19 2011] Fit fullrun_ccd0_acisf01523_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 23 03:13:31 2011] Spatial fit model total counts = 200.999000, observed total counts = 201.000000
[Sun Oct 23 03:13:31 2011] Offset between fit and detection position for source 1 = 0.082944 pixels
[Sun Oct 23 03:13:31 2011] 201.068800 total counts/ 66.381800 bgd. counts: snr = 16.531078
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.082944 pixels
  Position = (547.9, 1026.5) = 18 44 21.10 -3 57 6.9
  Extent = 2.8 (2.3-3.2)", rotation angle = 0
  Source counts = 134.7 +/- 14.2
  Background counts = 66.4
  Rate = 0.002 +/- 0.0002
[Sun Oct 23 03:13:31 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 03:13:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 03:13:31 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 03:13:31 2011] Source does appear to be extended
[Sun Oct 23 03:13:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 03:14:02 2011] Not overwriting source region fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 23 03:14:02 2011] Extracting stamp from image fullrun_ccd0_acisf01523_pi14-548_cl_sm2.00.img.gz, (422, 900) - (674, 1153)
[Sun Oct 23 03:14:02 2011] Writing fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1.gif
[Sun Oct 23 03:14:03 2011] ../../acisf01523/products/events/fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1_src.evt and ../../acisf01523/products/events/fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 23 03:14:03 2011] Size of ../../acisf01523/products/events/fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1_src.evt.gz[events] = 184 counts
[Sun Oct 23 03:14:03 2011] Mean chipx,y = (546.61, 73.14)
[Sun Oct 23 03:14:03 2011] Mean tdetx,y = (3134.14, 4585.39)
[Sun Oct 23 03:14:03 2011] chipx,y range = (516.00-577.00, 42.00-107.00)
[Sun Oct 23 03:14:03 2011] Size of ../../acisf01523/products/events/fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 270 counts
[Sun Oct 23 03:14:03 2011] ../../acisf01523/products/images/fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1_src.img and ../../acisf01523/products/images/fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 23 03:14:03 2011] ../../acisf01523/products/spectra/fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1_src.pi and ../../acisf01523/products/spectra/fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 23 03:14:06 2011] ../../acisf01523/products/lightcurves/fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1_src.lc and ../../acisf01523/products/lightcurves/fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 23 03:14:45 2011] Keeping rmf generated by specextract
[Sun Oct 23 03:14:45 2011] 171.52
[Sun Oct 23 03:41:52 2011] Updating aperture counts using extracted products
[Sun Oct 23 03:41:52 2011] Error reading totcts from fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 23 03:41:52 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 03:41:52 2011] Using photon index=1.80, rate=0.00233, arf fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 03:41:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 03:41:52 2011] Updating source flux to 4.4e-14
[Sun Oct 23 03:42:06 2011] Reading fit data from acisf01523/analysis//spectral/fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct 23 03:42:06 2011] Spectral fit parameter nH value = 7.66868e+21
[Sun Oct 23 03:42:06 2011] Spectral fit parameter PhoIndex value = 2.25986
[Sun Oct 23 03:42:06 2011] Failed to get F(0.3-8.0) from acisf01523/analysis//spectral/fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct 23 03:42:06 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 03:42:06 2011] Using Nh = 7.7e+21, photon index=2.26, rate=0.00233, arf fullrun_ccd0_acisf01523_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 03:42:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 03:42:06 2011] Updating source flux to 2.9e-14