[Fri May 10 21:19:35 2013] Detection parameters:
  Position = (1008.1, 753.3) = 10 1 58.93 1 53 19.6
  Extent = 0.5" x 0.5", rotation angle = 125 degrees
  Source counts = 12.3 +/- 3.6
  Background counts = 0.7
  Rate = 0.0002 +/- 7e-05

[Fri May 10 21:19:35 2013] Off-axis axis estimate = 4.05'
[Fri May 10 22:13:38 2013] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Fri May 10 22:13:38 2013] Initial guess for spatial extent in simple fitting = 0.84"
[Fri May 10 22:13:38 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.017
[Fri May 10 22:13:38 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 0.84"
[Fri May 10 22:29:16 2013] fullrun_ccd3_acisf15227_pi14-548_cl_pass0_src10.ximg exists
[Fri May 10 22:29:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15227_pi14-548_cl_pass0_src10.csv
[Fri May 10 22:29:16 2013] fullrun_ccd3_acisf15227_pi14-548_cl_pass0_src10_1.ximg exists
[Fri May 10 22:29:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15227_pi14-548_cl_pass0_src10.csv
[Fri May 10 22:29:16 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15227_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15227_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 22:29:16 2013] fullrun_ccd3_acisf15227_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri May 10 22:29:16 2013] fullrun_ccd3_acisf15227_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri May 10 22:29:16 2013] Fit fullrun_ccd3_acisf15227_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri May 10 22:29:24 2013] Spatial fit model total counts = 13.301200, observed total counts = 14.000000
[Fri May 10 22:29:24 2013] Offset between fit and detection position for source 10 = 0.784139 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.784139 pixels
  Position = (1008.6, 754.0) = 10 1 58.93 1 53 19.7
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 13.1 +/- 3.6
  Background counts = 0.0
  Rate = 0.0002 +/- 7e-05
[Fri May 10 22:29:24 2013] Vigneting correction estimate = 1.000000
[Fri May 10 22:29:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 22:29:24 2013] Assessing source extent using major axis lower bound
[Fri May 10 22:29:24 2013] Source does appear to be extended
[Fri May 10 22:29:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 23:22:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 23:22:24 2013] Initial guess for spatial extent in simple fitting = 0.59"
[Fri May 10 23:22:24 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.033
[Fri May 10 23:22:24 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 0.59"
[Fri May 10 23:37:27 2013] fullrun_ccd3_acisf15227_pi14-548_cl_pass1_src10.ximg exists
[Fri May 10 23:37:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15227_pi14-548_cl_pass1_src10.csv
[Fri May 10 23:37:27 2013] fullrun_ccd3_acisf15227_pi14-548_cl_pass1_src10_1.ximg exists
[Fri May 10 23:37:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15227_pi14-548_cl_pass1_src10.csv
[Fri May 10 23:37:27 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15227_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15227_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 23:37:27 2013] fullrun_ccd3_acisf15227_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri May 10 23:37:27 2013] fullrun_ccd3_acisf15227_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri May 10 23:37:27 2013] Fit fullrun_ccd3_acisf15227_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri May 10 23:37:35 2013] Spatial fit model total counts = 12.243500, observed total counts = 13.000000
[Fri May 10 23:37:35 2013] Offset between fit and detection position for source 10 = 0.170030 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.170030 pixels
  Position = (1008.6, 753.8) = 10 1 58.93 1 53 19.6
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 12.2 +/- 3.5
  Background counts = 0.0
  Rate = 0.0002 +/- 7e-05
[Fri May 10 23:37:35 2013] Vigneting correction estimate = 1.000000
[Fri May 10 23:37:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 23:37:35 2013] Assessing source extent using major axis lower bound
[Fri May 10 23:37:35 2013] Source does appear to be extended
[Fri May 10 23:37:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 00:03:04 2013] Writing source region out to fullrun_ccd3_acisf15227_pi14-548_pass1_cl_src10_src.reg
[Sat May 11 00:03:04 2013] Extracting stamp from image fullrun_ccd3_acisf15227_pi14-548_cl_sm2.00.img.gz, (981, 726) - (1037, 782)
[Sat May 11 00:03:04 2013] Writing fullrun_ccd3_acisf15227_pi14-548_pass1_cl_src10.gif
[Sat May 11 00:07:59 2013] Size of ../../acisf15227/products/events/fullrun_ccd3_acisf15227_pi14-548_pass1_cl_src10_src.evt.gz[events] = 13 counts
[Sat May 11 00:07:59 2013] Mean chipx,y = (871.38, 546.46)
[Sat May 11 00:07:59 2013] Mean tdetx,y = (4585.54, 3932.38)
[Sat May 11 00:07:59 2013] chipx,y range = (857.00-891.00, 529.00-561.00)
[Sat May 11 00:07:59 2013] Size of ../../acisf15227/products/events/fullrun_ccd3_acisf15227_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 9 counts
[Sat May 11 00:08:01 2013] Not generating rmf since there are only 12 counts
[Sat May 11 00:08:01 2013] arf not found, will run specextract
[Sat May 11 00:08:25 2013] ../../acisf15227/products/spectra/fullrun_ccd3_acisf15227_pi14-548_pass1_cl_src10.warf not found
[Sat May 11 00:08:25 2013] ../../acisf15227/products/spectra/fullrun_ccd3_acisf15227_pi14-548_pass1_cl_src10.wrmf not found
[Sat May 11 00:08:25 2013] Removal of ../../acisf15227/products/spectra/fullrun_ccd3_acisf15227_pi14-548_pass1_cl_src10.soff failed
[Sat May 11 00:12:32 2013] Spectrum 10 has only 12 counts, deleting rmf
[Sat May 11 00:12:32 2013] 193.314
[Sat May 11 00:12:42 2013] Updating aperture counts using extracted products
[Sat May 11 00:12:42 2013] Total counts from fullrun_ccd3_acisf15227_pi14-548_pass1_cl_src10_src.pi.gz = 13.00
[Sat May 11 00:12:42 2013] Total counts from fullrun_ccd3_acisf15227_pi14-548_pass1_cl_src10_bgd.pi.gz = 9.00
[Sat May 11 00:12:42 2013] Got source and background scale factors 0.000001, 0.000014
[Sat May 11 00:12:42 2013] User source parameters:
  Position = (1008.6, 753.8) = 10 1 58.93 1 53 19.6
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source aperture counts = 12.2 +/- 4.7
  Background aperture counts = 0.8
  Rate = 0.0002 +/- 9e-05

[Sat May 11 00:12:43 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 00:12:43 2013] Using photon index=1.80, rate=0.000231, arf fullrun_ccd3_acisf15227_pi14-548_pass1_cl_src10.arf
[Sat May 11 00:12:43 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 11 00:12:43 2013] Updating source flux to 2.8e-15
[Sat May 11 00:12:48 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting