[Wed May 15 17:31:10 2013] Detection parameters:
  Position = (1110.1, 246.9) = 9 59 2.14 1 48 29.8
  Extent = 0.5" x 0.5", rotation angle = 96 degrees
  Source counts = 14.6 +/- 3.9
  Background counts = 0.4
  Rate = 0.0003 +/- 8e-05

[Wed May 15 17:31:11 2013] Off-axis axis estimate = 0.48'
[Wed May 15 18:12:27 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed May 15 18:12:27 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Wed May 15 18:12:27 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.592
[Wed May 15 18:12:27 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 0.39"
[Wed May 15 18:28:48 2013] fullrun_ccd3_acisf15221_pi14-548_cl_pass0_src11.ximg exists
[Wed May 15 18:28:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15221_pi14-548_cl_pass0_src11.csv
[Wed May 15 18:28:48 2013] fullrun_ccd3_acisf15221_pi14-548_cl_pass0_src11_1.ximg exists
[Wed May 15 18:28:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15221_pi14-548_cl_pass0_src11.csv
[Wed May 15 18:28:48 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15221_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15221_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 18:28:48 2013] fullrun_ccd3_acisf15221_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed May 15 18:28:48 2013] fullrun_ccd3_acisf15221_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed May 15 18:28:48 2013] Fit fullrun_ccd3_acisf15221_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Wed May 15 18:28:55 2013] Spatial fit model total counts = 15.174300, observed total counts = 16.000000
[Wed May 15 18:28:55 2013] Offset between fit and detection position for source 21 = 0.879787 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.879787 pixels
  Position = (1110.6, 247.6) = 9 59 2.14 1 48 29.9
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 14.6 +/- 3.8
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Wed May 15 18:28:55 2013] Vigneting correction estimate = 1.000000
[Wed May 15 18:28:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 18:28:55 2013] Assessing source extent using major axis lower bound
[Wed May 15 18:28:55 2013] Source does appear to be extended
[Wed May 15 18:28:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 19:04:44 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 15 19:04:44 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Wed May 15 19:04:44 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.358
[Wed May 15 19:04:44 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 0.39"
[Wed May 15 19:20:28 2013] fullrun_ccd3_acisf15221_pi14-548_cl_pass1_src11.ximg exists
[Wed May 15 19:20:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15221_pi14-548_cl_pass1_src11.csv
[Wed May 15 19:20:28 2013] fullrun_ccd3_acisf15221_pi14-548_cl_pass1_src11_1.ximg exists
[Wed May 15 19:20:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15221_pi14-548_cl_pass1_src11.csv
[Wed May 15 19:20:28 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15221_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15221_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 19:20:28 2013] fullrun_ccd3_acisf15221_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Wed May 15 19:20:28 2013] fullrun_ccd3_acisf15221_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Wed May 15 19:20:28 2013] Fit fullrun_ccd3_acisf15221_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Wed May 15 19:20:35 2013] Spatial fit model total counts = 15.036500, observed total counts = 16.000000
[Wed May 15 19:20:35 2013] Offset between fit and detection position for source 21 = 0.017810 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.017810 pixels
  Position = (1110.6, 247.7) = 9 59 2.14 1 48 29.9
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 14.5 +/- 3.8
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Wed May 15 19:20:35 2013] Vigneting correction estimate = 1.000000
[Wed May 15 19:20:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 19:20:35 2013] Assessing source extent using major axis lower bound
[Wed May 15 19:20:35 2013] Source does appear to be extended
[Wed May 15 19:20:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 19:37:38 2013] Writing source region out to fullrun_ccd3_acisf15221_pi14-548_pass1_cl_src21_src.reg
[Wed May 15 19:37:38 2013] Extracting stamp from image fullrun_ccd3_acisf15221_pi14-548_cl_sm2.00.img.gz, (1094, 231) - (1127, 264)
[Wed May 15 19:37:38 2013] Writing fullrun_ccd3_acisf15221_pi14-548_pass1_cl_src21.gif
[Wed May 15 19:43:05 2013] Size of ../../acisf15221/products/events/fullrun_ccd3_acisf15221_pi14-548_pass1_cl_src21_src.evt.gz[events] = 14 counts
[Wed May 15 19:43:05 2013] Mean chipx,y = (926.21, 967.14)
[Wed May 15 19:43:05 2013] Mean tdetx,y = (4164.86, 3987.21)
[Wed May 15 19:43:05 2013] chipx,y range = (912.00-943.00, 955.00-984.00)
[Wed May 15 19:43:05 2013] Size of ../../acisf15221/products/events/fullrun_ccd3_acisf15221_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 2 counts
[Wed May 15 19:43:06 2013] Not generating rmf since there are only 14 counts
[Wed May 15 19:43:06 2013] arf not found, will run specextract
[Wed May 15 19:43:40 2013] ../../acisf15221/products/spectra/fullrun_ccd3_acisf15221_pi14-548_pass1_cl_src21.warf not found
[Wed May 15 19:43:40 2013] ../../acisf15221/products/spectra/fullrun_ccd3_acisf15221_pi14-548_pass1_cl_src21.wrmf not found
[Wed May 15 19:43:40 2013] Removal of ../../acisf15221/products/spectra/fullrun_ccd3_acisf15221_pi14-548_pass1_cl_src21.soff failed
[Wed May 15 19:49:20 2013] Spectrum 21 has only 15 counts, deleting rmf
[Wed May 15 19:49:20 2013] 201.448
[Wed May 15 19:49:28 2013] Updating aperture counts using extracted products
[Wed May 15 19:49:28 2013] Total counts from fullrun_ccd3_acisf15221_pi14-548_pass1_cl_src21_src.pi.gz = 14.00
[Wed May 15 19:49:28 2013] Total counts from fullrun_ccd3_acisf15221_pi14-548_pass1_cl_src21_bgd.pi.gz = 2.00
[Wed May 15 19:49:28 2013] Got source and background scale factors 0.000000, 0.000005
[Wed May 15 19:49:28 2013] User source parameters:
  Position = (1110.6, 247.7) = 9 59 2.14 1 48 29.9
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source aperture counts = 13.8 +/- 4.8
  Background aperture counts = 0.2
  Rate = 0.0003 +/- 0.0001

[Wed May 15 19:49:30 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 19:49:30 2013] Using photon index=1.80, rate=0.000293, arf fullrun_ccd3_acisf15221_pi14-548_pass1_cl_src21.arf
[Wed May 15 19:49:30 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May 15 19:49:30 2013] Updating source flux to 3.4e-15
[Wed May 15 19:49:40 2013] Source 21 has fewer than 100.000000 counts, skipping spectral fitting