[Wed May 29 19:21:32 2013] Detection parameters:
  Position = (1083.3, 681.8) = 9 58 9.49 2 5 33.1
  Extent = 0.5" x 0.5", rotation angle = 161 degrees
  Source counts = 14.6 +/- 3.9
  Background counts = 0.4
  Rate = 0.0003 +/- 8e-05

[Wed May 29 19:21:32 2013] Off-axis axis estimate = 4.49'
[Wed May 29 20:14:33 2013] Using EEF radius (= 0.99 ")to estimate initial spatial extent for simple fitting
[Wed May 29 20:14:33 2013] Initial guess for spatial extent in simple fitting = 0.99"
[Wed May 29 20:14:33 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.990
[Wed May 29 20:14:33 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 0.99"
[Wed May 29 20:48:17 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass0_src17.ximg exists
[Wed May 29 20:48:17 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass0_src17_1.ximg exists
[Wed May 29 20:48:17 2013] Fit fullrun_ccd3_acisf15219_pi14-548_cl_pass0_src17 appears to have run properly
[Wed May 29 20:48:17 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Wed May 29 20:48:17 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Wed May 29 20:48:17 2013] Fit fullrun_ccd3_acisf15219_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Wed May 29 20:48:28 2013] Spatial fit model total counts = 18.591600, observed total counts = 19.000000
[Wed May 29 20:48:28 2013] Offset between fit and detection position for source 23 = 0.750208 pixels
[Wed May 29 20:48:28 2013] 18.327470 total counts/ 4.225170 bgd. counts: snr = 6.860691
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.750208 pixels
  Position = (1083.9, 682.3) = 9 58 9.49 2 5 33.1
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 14.1 +/- 4.3
  Background counts = 4.2
  Rate = 0.0003 +/- 9e-05
[Wed May 29 20:48:28 2013] Vigneting correction estimate = 1.000000
[Wed May 29 20:48:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 20:48:28 2013] Assessing source extent using major axis lower bound
[Wed May 29 20:48:28 2013] Source does appear to be extended
[Wed May 29 20:48:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 21:31:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 21:31:42 2013] Initial guess for spatial extent in simple fitting = 0.44"
[Wed May 29 21:31:42 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.158
[Wed May 29 21:31:42 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 0.44"
[Wed May 29 22:03:05 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass1_src17.ximg exists
[Wed May 29 22:03:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15219_pi14-548_cl_pass1_src17.csv
[Wed May 29 22:03:05 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass1_src17_1.ximg exists
[Wed May 29 22:03:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15219_pi14-548_cl_pass1_src17.csv
[Wed May 29 22:03:05 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15219_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15219_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 22:03:05 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Wed May 29 22:03:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15219_pi14-548_cl_pass1_tfrozen_src17.csv
[Wed May 29 22:03:05 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Wed May 29 22:03:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15219_pi14-548_cl_pass1_tfrozen_src17.csv
[Wed May 29 22:03:05 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15219_pi14-548_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15219_pi14-548_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 22:03:16 2013] Spatial fit model total counts = 14.507600, observed total counts = 17.000000
[Wed May 29 22:03:16 2013] Offset between fit and detection position for source 23 = 0.187115 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.187115 pixels
  Position = (1083.7, 682.4) = 9 58 9.49 2 5 33.1
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 14.9 +/- 3.9
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Wed May 29 22:03:16 2013] Vigneting correction estimate = 1.000000
[Wed May 29 22:03:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 22:03:16 2013] Assessing source extent using major axis lower bound
[Wed May 29 22:03:16 2013] Source does appear to be extended
[Wed May 29 22:03:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 22:31:41 2013] Writing source region out to fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src23_src.reg
[Wed May 29 22:31:41 2013] Extracting stamp from image fullrun_ccd3_acisf15219_pi14-548_cl_sm2.00.img.gz, (1061, 660) - (1106, 705)
[Wed May 29 22:31:41 2013] Writing fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src23.gif
[Wed May 29 22:40:24 2013] Size of ../../acisf15219/products/events/fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src23_src.evt.gz[events] = 15 counts
[Wed May 29 22:40:24 2013] Mean chipx,y = (1008.07, 495.00)
[Wed May 29 22:40:24 2013] Mean tdetx,y = (4637.00, 4069.07)
[Wed May 29 22:40:24 2013] chipx,y range = (997.00-1021.00, 481.00-516.00)
[Wed May 29 22:40:24 2013] Size of ../../acisf15219/products/events/fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 6 counts
[Wed May 29 22:40:25 2013] Not generating rmf since there are only 14 counts
[Wed May 29 22:40:25 2013] arf not found, will run specextract
[Wed May 29 22:40:48 2013] ../../acisf15219/products/spectra/fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src23.warf not found
[Wed May 29 22:40:48 2013] ../../acisf15219/products/spectra/fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src23.wrmf not found
[Wed May 29 22:40:48 2013] Removal of ../../acisf15219/products/spectra/fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src23.soff failed
[Wed May 29 22:50:20 2013] Spectrum 23 has only 15 counts, deleting rmf
[Wed May 29 22:50:20 2013] 120.195
[Wed May 29 22:50:33 2013] Updating aperture counts using extracted products
[Wed May 29 22:50:33 2013] Total counts from fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src23_src.pi.gz = 15.00
[Wed May 29 22:50:33 2013] Total counts from fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src23_bgd.pi.gz = 6.00
[Wed May 29 22:50:33 2013] Got source and background scale factors 0.000001, 0.000009
[Wed May 29 22:50:33 2013] User source parameters:
  Position = (1083.7, 682.4) = 9 58 9.49 2 5 33.1
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source aperture counts = 14.5 +/- 5.0
  Background aperture counts = 0.5
  Rate = 0.0003 +/- 0.0001

[Wed May 29 22:50:35 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 22:50:35 2013] Using photon index=1.80, rate=0.000302, arf fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src23.arf
[Wed May 29 22:50:35 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May 29 22:50:35 2013] Updating source flux to 6e-15
[Wed May 29 22:50:49 2013] Source 23 has fewer than 100.000000 counts, skipping spectral fitting