[Wed May 29 19:21:32 2013] Detection parameters:
  Position = (748.6, 380.5) = 9 58 20.47 2 3 4.9
  Extent = 0.5" x 0.5", rotation angle = 180 degrees
  Source counts = 18.5 +/- 4.4
  Background counts = 0.5
  Rate = 0.0004 +/- 9e-05

[Wed May 29 19:21:32 2013] Off-axis axis estimate = 3.45'
[Wed May 29 20:14:33 2013] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Wed May 29 20:14:33 2013] Initial guess for spatial extent in simple fitting = 0.68"
[Wed May 29 20:14:33 2013] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.634
[Wed May 29 20:14:33 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 0.68"
[Wed May 29 20:48:17 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass0_src12.ximg exists
[Wed May 29 20:48:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15219_pi14-548_cl_pass0_src12.csv
[Wed May 29 20:48:17 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass0_src12_1.ximg exists
[Wed May 29 20:48:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15219_pi14-548_cl_pass0_src12.csv
[Wed May 29 20:48:17 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15219_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15219_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 20:48:17 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Wed May 29 20:48:17 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Wed May 29 20:48:17 2013] Fit fullrun_ccd3_acisf15219_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Wed May 29 20:48:28 2013] Spatial fit model total counts = 23.700300, observed total counts = 25.000000
[Wed May 29 20:48:28 2013] Offset between fit and detection position for source 11 = 1.182732 pixels
[Wed May 29 20:48:28 2013] 23.701400 total counts/ 0.000000 bgd. counts: snr = 160980550883.927063
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.182732 pixels
  Position = (749.7, 380.7) = 9 58 20.45 2 3 4.7
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 23.7 +/- 4.9
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Wed May 29 20:48:28 2013] Vigneting correction estimate = 1.000000
[Wed May 29 20:48:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 20:48:28 2013] Assessing source extent using major axis lower bound
[Wed May 29 20:48:28 2013] Source does appear to be extended
[Wed May 29 20:48:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 21:31:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 21:31:42 2013] Initial guess for spatial extent in simple fitting = 0.67"
[Wed May 29 21:31:42 2013] source mask rpix=1.4, npix_max = 13, mask sum = 13, frac = 0.947
[Wed May 29 21:31:42 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 0.67"
[Wed May 29 22:03:05 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass1_src12.ximg exists
[Wed May 29 22:03:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15219_pi14-548_cl_pass1_src12.csv
[Wed May 29 22:03:05 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass1_src12_1.ximg exists
[Wed May 29 22:03:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15219_pi14-548_cl_pass1_src12.csv
[Wed May 29 22:03:05 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15219_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15219_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 22:03:05 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Wed May 29 22:03:05 2013] fullrun_ccd3_acisf15219_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Wed May 29 22:03:05 2013] Fit fullrun_ccd3_acisf15219_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Wed May 29 22:03:16 2013] Spatial fit model total counts = 25.063800, observed total counts = 25.000000
[Wed May 29 22:03:16 2013] Offset between fit and detection position for source 11 = 0.083158 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.083158 pixels
  Position = (749.7, 380.8) = 9 58 20.45 2 3 4.8
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 25.1 +/- 5.0
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Wed May 29 22:03:16 2013] Vigneting correction estimate = 1.000000
[Wed May 29 22:03:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 22:03:16 2013] Assessing source extent using major axis lower bound
[Wed May 29 22:03:16 2013] Source does appear to be extended
[Wed May 29 22:03:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 22:31:41 2013] Writing source region out to fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src11_src.reg
[Wed May 29 22:31:41 2013] Extracting stamp from image fullrun_ccd3_acisf15219_pi14-548_cl_sm2.00.img.gz, (721, 352) - (779, 410)
[Wed May 29 22:31:41 2013] Writing fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src11.gif
[Wed May 29 22:37:59 2013] Size of ../../acisf15219/products/events/fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src11_src.evt.gz[events] = 25 counts
[Wed May 29 22:37:59 2013] Mean chipx,y = (641.92, 748.08)
[Wed May 29 22:37:59 2013] Mean tdetx,y = (4383.92, 3702.92)
[Wed May 29 22:37:59 2013] chipx,y range = (623.00-661.00, 730.00-766.00)
[Wed May 29 22:37:59 2013] Size of ../../acisf15219/products/events/fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 16 counts
[Wed May 29 22:38:00 2013] Not generating rmf since there are only 25 counts
[Wed May 29 22:38:00 2013] arf not found, will run specextract
[Wed May 29 22:38:26 2013] ../../acisf15219/products/spectra/fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src11.warf not found
[Wed May 29 22:38:26 2013] ../../acisf15219/products/spectra/fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src11.wrmf not found
[Wed May 29 22:38:26 2013] Removal of ../../acisf15219/products/spectra/fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src11.soff failed
[Wed May 29 22:50:20 2013] Spectrum 11 has only 25 counts, deleting rmf
[Wed May 29 22:50:20 2013] 180.043
[Wed May 29 22:50:32 2013] Updating aperture counts using extracted products
[Wed May 29 22:50:32 2013] Total counts from fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src11_src.pi.gz = 25.00
[Wed May 29 22:50:32 2013] Total counts from fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src11_bgd.pi.gz = 16.00
[Wed May 29 22:50:32 2013] Got source and background scale factors 0.000001, 0.000015
[Wed May 29 22:50:32 2013] User source parameters:
  Position = (749.7, 380.8) = 9 58 20.45 2 3 4.8
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source aperture counts = 23.6 +/- 6.1
  Background aperture counts = 1.4
  Rate = 0.0005 +/- 0.0001

[Wed May 29 22:50:35 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 22:50:35 2013] Using photon index=1.80, rate=0.000507, arf fullrun_ccd3_acisf15219_pi14-548_pass1_cl_src11.arf
[Wed May 29 22:50:35 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May 29 22:50:35 2013] Updating source flux to 6.7e-15
[Wed May 29 22:50:49 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting