[Mon Jun  3 11:37:21 2013] Detection parameters:
  Position = (933.9, 417.3) = 9 58 20.46 2 3 5.1
  Extent = 0.6" x 0.6", rotation angle = 64 degrees
  Source counts = 19.0 +/- 4.5
  Background counts = 1.0
  Rate = 0.0004 +/- 0.0001

[Mon Jun  3 11:37:21 2013] Off-axis axis estimate = 5.67'
[Mon Jun  3 12:17:01 2013] Using EEF radius (= 1.47 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 12:17:01 2013] Initial guess for spatial extent in simple fitting = 1.47"
[Mon Jun  3 12:17:01 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Mon Jun  3 12:17:01 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 1.47"
[Mon Jun  3 12:33:12 2013] fullrun_ccd2_acisf15218_pi14-548_cl_pass0_src8.ximg exists
[Mon Jun  3 12:33:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15218_pi14-548_cl_pass0_src8.csv
[Mon Jun  3 12:33:12 2013] fullrun_ccd2_acisf15218_pi14-548_cl_pass0_src8_1.ximg exists
[Mon Jun  3 12:33:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15218_pi14-548_cl_pass0_src8.csv
[Mon Jun  3 12:33:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15218_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15218_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 12:33:12 2013] fullrun_ccd2_acisf15218_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Mon Jun  3 12:33:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15218_pi14-548_cl_pass0_tfrozen_src8.csv
[Mon Jun  3 12:33:12 2013] fullrun_ccd2_acisf15218_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Jun  3 12:33:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15218_pi14-548_cl_pass0_tfrozen_src8.csv
[Mon Jun  3 12:33:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15218_pi14-548_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15218_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 13:22:11 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 18.014036 pixels away
[Mon Jun  3 13:22:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 13:22:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 13:22:11 2013] Assessing source extent using major
[Mon Jun  3 13:22:11 2013] Source does appear to be extended
[Mon Jun  3 13:22:11 2013] Computing asymmetry using major and minor axis, asym = 1.10
[Mon Jun  3 13:58:23 2013] Using EEF radius (= 1.47 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 13:58:23 2013] Initial guess for spatial extent in simple fitting = 1.47"
[Mon Jun  3 13:58:23 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Mon Jun  3 13:58:23 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 1.47"
[Mon Jun  3 14:14:00 2013] fullrun_ccd2_acisf15218_pi14-548_cl_pass1_src8.ximg exists
[Mon Jun  3 14:14:00 2013] fullrun_ccd2_acisf15218_pi14-548_cl_pass1_src8_1.ximg exists
[Mon Jun  3 14:14:00 2013] Fit fullrun_ccd2_acisf15218_pi14-548_cl_pass1_src8 appears to have run properly
[Mon Jun  3 14:14:01 2013] fullrun_ccd2_acisf15218_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Mon Jun  3 14:14:01 2013] fullrun_ccd2_acisf15218_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Jun  3 14:14:01 2013] Fit fullrun_ccd2_acisf15218_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Mon Jun  3 14:31:58 2013] Spatial fit model total counts = 28.556800, observed total counts = 27.000000
[Mon Jun  3 14:31:58 2013] Offset between fit and detection position for source 27 = 0.885473 pixels
[Mon Jun  3 14:31:58 2013] 29.201100 total counts/ 15.430600 bgd. counts: snr = 3.505567
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.885473 pixels
  Position = (934.3, 418.0) = 9 58 20.46 2 3 5.2
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 13.8 +/- 5.4
  Background counts = 15.4
  Rate = 0.0003 +/- 0.0001
[Mon Jun  3 14:31:58 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 14:31:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 14:31:58 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 14:31:58 2013] Source does appear to be extended
[Mon Jun  3 14:31:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 14:53:12 2013] Writing source region out to fullrun_ccd2_acisf15218_pi14-548_pass1_cl_src27_src.reg
[Mon Jun  3 14:53:12 2013] Extracting stamp from image fullrun_ccd2_acisf15218_pi14-548_cl_sm2.00.img.gz, (908, 392) - (961, 444)
[Mon Jun  3 14:53:12 2013] Writing fullrun_ccd2_acisf15218_pi14-548_pass1_cl_src27.gif
[Mon Jun  3 14:57:47 2013] Size of ../../acisf15218/products/events/fullrun_ccd2_acisf15218_pi14-548_pass1_cl_src27_src.evt.gz[events] = 20 counts
[Mon Jun  3 14:57:47 2013] Mean chipx,y = (143.75, 339.65)
[Mon Jun  3 14:57:47 2013] Mean tdetx,y = (3400.65, 3942.25)
[Mon Jun  3 14:57:47 2013] chipx,y range = (124.00-160.00, 323.00-358.00)
[Mon Jun  3 14:57:47 2013] Size of ../../acisf15218/products/events/fullrun_ccd2_acisf15218_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 11 counts
[Mon Jun  3 14:57:48 2013] Not generating rmf since there are only 13 counts
[Mon Jun  3 14:57:48 2013] arf not found, will run specextract
[Mon Jun  3 14:58:11 2013] ../../acisf15218/products/spectra/fullrun_ccd2_acisf15218_pi14-548_pass1_cl_src27.warf not found
[Mon Jun  3 14:58:11 2013] ../../acisf15218/products/spectra/fullrun_ccd2_acisf15218_pi14-548_pass1_cl_src27.wrmf not found
[Mon Jun  3 14:58:11 2013] Removal of ../../acisf15218/products/spectra/fullrun_ccd2_acisf15218_pi14-548_pass1_cl_src27.soff failed
[Mon Jun  3 15:06:20 2013] Spectrum 27 has only 14 counts, deleting rmf
[Mon Jun  3 15:06:20 2013] 161.183
[Mon Jun  3 15:14:30 2013] Updating aperture counts using extracted products
[Mon Jun  3 15:14:30 2013] Total counts from fullrun_ccd2_acisf15218_pi14-548_pass1_cl_src27_src.pi.gz = 20.00
[Mon Jun  3 15:14:30 2013] Total counts from fullrun_ccd2_acisf15218_pi14-548_pass1_cl_src27_bgd.pi.gz = 11.00
[Mon Jun  3 15:14:30 2013] Got source and background scale factors 0.000001, 0.000012
[Mon Jun  3 15:14:30 2013] User source parameters:
  Position = (934.3, 418.0) = 9 58 20.46 2 3 5.2
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source aperture counts = 19.1 +/- 5.6
  Background aperture counts = 0.9
  Rate = 0.0004 +/- 0.0001

[Mon Jun  3 15:14:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 15:14:32 2013] Using photon index=1.80, rate=0.000296, arf fullrun_ccd2_acisf15218_pi14-548_pass1_cl_src27.arf
[Mon Jun  3 15:14:32 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jun  3 15:14:32 2013] Updating source flux to 4.4e-15
[Mon Jun  3 15:14:39 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting