[Mon Jun  3 11:36:56 2013] Detection parameters:
  Position = (323.5, 247.4) = 9 58 9.38 2 10 57.9
  Extent = 0.5" x 0.5", rotation angle = 136 degrees
  Source counts = 21.5 +/- 4.7
  Background counts = 0.5
  Rate = 0.0005 +/- 0.0001

[Mon Jun  3 11:36:57 2013] Off-axis axis estimate = 3.52'
[Mon Jun  3 12:05:34 2013] Using EEF radius (= 0.70 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 12:05:34 2013] Initial guess for spatial extent in simple fitting = 0.70"
[Mon Jun  3 12:05:34 2013] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.818
[Mon Jun  3 12:05:34 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 0.70"
[Mon Jun  3 12:17:01 2013] fullrun_ccd1_acisf15218_pi14-548_cl_pass0_src5.ximg exists
[Mon Jun  3 12:17:01 2013] fullrun_ccd1_acisf15218_pi14-548_cl_pass0_src5_1.ximg exists
[Mon Jun  3 12:17:01 2013] Fit fullrun_ccd1_acisf15218_pi14-548_cl_pass0_src5 appears to have run properly
[Mon Jun  3 12:17:01 2013] fullrun_ccd1_acisf15218_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Mon Jun  3 12:17:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf15218_pi14-548_cl_pass0_tfrozen_src5.csv
[Mon Jun  3 12:17:01 2013] fullrun_ccd1_acisf15218_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jun  3 12:17:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf15218_pi14-548_cl_pass0_tfrozen_src5.csv
[Mon Jun  3 12:17:01 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf15218_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf15218_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 13:22:10 2013] Spatial fit model total counts = 28.607000, observed total counts = 32.000000
[Mon Jun  3 13:22:10 2013] Offset between fit and detection position for source 10 = 0.910732 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.910732 pixels
  Position = (324.4, 247.5) = 9 58 9.37 2 10 57.8
  Extent = 0.7 (0.4-0.8)", rotation angle = 0
  Source counts = 28.0 +/- 5.3
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Mon Jun  3 13:22:10 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 13:22:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 13:22:10 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 13:22:10 2013] Source does appear to be extended
[Mon Jun  3 13:22:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 13:48:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  3 13:48:38 2013] Initial guess for spatial extent in simple fitting = 0.66"
[Mon Jun  3 13:48:38 2013] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.670
[Mon Jun  3 13:48:38 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 0.66"
[Mon Jun  3 13:58:23 2013] fullrun_ccd1_acisf15218_pi14-548_cl_pass1_src5.ximg exists
[Mon Jun  3 13:58:23 2013] fullrun_ccd1_acisf15218_pi14-548_cl_pass1_src5_1.ximg exists
[Mon Jun  3 13:58:23 2013] Fit fullrun_ccd1_acisf15218_pi14-548_cl_pass1_src5 appears to have run properly
[Mon Jun  3 13:58:23 2013] fullrun_ccd1_acisf15218_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Mon Jun  3 13:58:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf15218_pi14-548_cl_pass1_tfrozen_src5.csv
[Mon Jun  3 13:58:23 2013] fullrun_ccd1_acisf15218_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jun  3 13:58:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf15218_pi14-548_cl_pass1_tfrozen_src5.csv
[Mon Jun  3 13:58:23 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf15218_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf15218_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 14:31:57 2013] Spatial fit model total counts = 28.907700, observed total counts = 32.000000
[Mon Jun  3 14:31:57 2013] Offset between fit and detection position for source 10 = 0.129536 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.129536 pixels
  Position = (324.5, 247.5) = 9 58 9.36 2 10 57.7
  Extent = 0.7 (0.4-0.8)", rotation angle = 0
  Source counts = 28.3 +/- 5.3
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Mon Jun  3 14:31:57 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 14:31:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 14:31:57 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 14:31:57 2013] Source does appear to be extended
[Mon Jun  3 14:31:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 14:43:24 2013] Writing source region out to fullrun_ccd1_acisf15218_pi14-548_pass1_cl_src10_src.reg
[Mon Jun  3 14:43:24 2013] Extracting stamp from image fullrun_ccd1_acisf15218_pi14-548_cl_sm2.00.img.gz, (293, 216) - (356, 279)
[Mon Jun  3 14:43:24 2013] Writing fullrun_ccd1_acisf15218_pi14-548_pass1_cl_src10.gif
[Mon Jun  3 14:45:45 2013] Size of ../../acisf15218/products/events/fullrun_ccd1_acisf15218_pi14-548_pass1_cl_src10_src.evt.gz[events] = 29 counts
[Mon Jun  3 14:45:45 2013] Mean chipx,y = (256.90, 796.28)
[Mon Jun  3 14:45:45 2013] Mean tdetx,y = (4335.72, 4363.90)
[Mon Jun  3 14:45:45 2013] chipx,y range = (236.00-271.00, 778.00-817.00)
[Mon Jun  3 14:45:45 2013] Size of ../../acisf15218/products/events/fullrun_ccd1_acisf15218_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 14 counts
[Mon Jun  3 14:45:46 2013] Not generating rmf since there are only 28 counts
[Mon Jun  3 14:45:46 2013] arf not found, will run specextract
[Mon Jun  3 14:46:11 2013] ../../acisf15218/products/spectra/fullrun_ccd1_acisf15218_pi14-548_pass1_cl_src10.warf not found
[Mon Jun  3 14:46:11 2013] ../../acisf15218/products/spectra/fullrun_ccd1_acisf15218_pi14-548_pass1_cl_src10.wrmf not found
[Mon Jun  3 14:46:11 2013] Removal of ../../acisf15218/products/spectra/fullrun_ccd1_acisf15218_pi14-548_pass1_cl_src10.soff failed
[Mon Jun  3 14:53:11 2013] Spectrum 10 has only 28 counts, deleting rmf
[Mon Jun  3 14:53:11 2013] 190.698
[Mon Jun  3 15:14:27 2013] Updating aperture counts using extracted products
[Mon Jun  3 15:14:27 2013] Total counts from fullrun_ccd1_acisf15218_pi14-548_pass1_cl_src10_src.pi.gz = 29.00
[Mon Jun  3 15:14:27 2013] Total counts from fullrun_ccd1_acisf15218_pi14-548_pass1_cl_src10_bgd.pi.gz = 14.00
[Mon Jun  3 15:14:27 2013] Got source and background scale factors 0.000001, 0.000016
[Mon Jun  3 15:14:27 2013] User source parameters:
  Position = (324.5, 247.5) = 9 58 9.36 2 10 57.7
  Extent = 0.7 (0.4-0.8)", rotation angle = 0
  Source aperture counts = 27.7 +/- 6.5
  Background aperture counts = 1.3
  Rate = 0.0006 +/- 0.0001

[Mon Jun  3 15:14:29 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 15:14:29 2013] Using photon index=1.80, rate=0.000609, arf fullrun_ccd1_acisf15218_pi14-548_pass1_cl_src10.arf
[Mon Jun  3 15:14:29 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jun  3 15:14:29 2013] Updating source flux to 7.6e-15
[Mon Jun  3 15:14:38 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun  3 15:14:39 2013] acisf15218/analysis//spectral/fullrun_ccd1_acisf15218_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete