[Mon Jun  3 11:36:32 2013] Detection parameters:
  Position = (390.5, 688.3) = 9 58 4.46 2 6 1.2
  Extent = 0.6" x 0.5", rotation angle = 171 degrees
  Source counts = 26.7 +/- 5.3
  Background counts = 1.3
  Rate = 0.0006 +/- 0.0001

[Mon Jun  3 11:36:33 2013] Off-axis axis estimate = 4.82'
[Mon Jun  3 11:39:13 2013] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 11:39:13 2013] Initial guess for spatial extent in simple fitting = 1.11"
[Mon Jun  3 11:39:13 2013] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.825
[Mon Jun  3 11:39:13 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 1.11"
[Mon Jun  3 12:05:34 2013] fullrun_ccd0_acisf15218_pi14-548_cl_pass0_src4.ximg exists
[Mon Jun  3 12:05:34 2013] fullrun_ccd0_acisf15218_pi14-548_cl_pass0_src4_1.ximg exists
[Mon Jun  3 12:05:34 2013] Fit fullrun_ccd0_acisf15218_pi14-548_cl_pass0_src4 appears to have run properly
[Mon Jun  3 12:05:34 2013] fullrun_ccd0_acisf15218_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Mon Jun  3 12:05:34 2013] fullrun_ccd0_acisf15218_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jun  3 12:05:34 2013] Fit fullrun_ccd0_acisf15218_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Jun  3 13:22:08 2013] Spatial fit model total counts = 29.631800, observed total counts = 30.000000
[Mon Jun  3 13:22:08 2013] Offset between fit and detection position for source 4 = 0.641237 pixels
[Mon Jun  3 13:22:08 2013] 29.926140 total counts/ 7.799540 bgd. counts: snr = 7.922827
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.641237 pixels
  Position = (390.7, 688.9) = 9 58 4.47 2 6 1.3
  Extent = 1.3 (0.8-2.2)" x 0.4 (0.3-0.6)", rotation angle = 19 (12-33) degrees
  Source counts = 22.1 +/- 5.5
  Background counts = 7.8
  Rate = 0.0005 +/- 0.0001
[Mon Jun  3 13:22:08 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 13:22:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 13:22:08 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 13:22:08 2013] Source does appear to be extended
[Mon Jun  3 13:22:08 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38
[Mon Jun  3 13:22:28 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  3 13:22:28 2013] Initial guess for spatial extent in simple fitting = 0.85"
[Mon Jun  3 13:22:28 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.999
[Mon Jun  3 13:22:28 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 0.85"
[Mon Jun  3 13:48:38 2013] fullrun_ccd0_acisf15218_pi14-548_cl_pass1_src4.ximg exists
[Mon Jun  3 13:48:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf15218_pi14-548_cl_pass1_src4.csv
[Mon Jun  3 13:48:38 2013] fullrun_ccd0_acisf15218_pi14-548_cl_pass1_src4_1.ximg exists
[Mon Jun  3 13:48:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf15218_pi14-548_cl_pass1_src4.csv
[Mon Jun  3 13:48:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf15218_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf15218_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 13:48:38 2013] fullrun_ccd0_acisf15218_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Mon Jun  3 13:48:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf15218_pi14-548_cl_pass1_tfrozen_src4.csv
[Mon Jun  3 13:48:38 2013] fullrun_ccd0_acisf15218_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jun  3 13:48:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf15218_pi14-548_cl_pass1_tfrozen_src4.csv
[Mon Jun  3 13:48:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf15218_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf15218_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 14:31:56 2013] Spatial fit model total counts = 26.775500, observed total counts = 30.000000
[Mon Jun  3 14:31:56 2013] Offset between fit and detection position for source 4 = 0.234151 pixels
[Mon Jun  3 14:31:56 2013] 26.803290 total counts/ 3.812790 bgd. counts: snr = 11.774080
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.234151 pixels
  Position = (390.4, 689.0) = 9 58 4.48 2 6 1.3
  Extent = 1.4 (1.2-1.7)" x 0.4 (0.2-0.6)", rotation angle = 22 (10-31) degrees
  Source counts = 23.0 +/- 5.2
  Background counts = 3.8
  Rate = 0.0005 +/- 0.0001
[Mon Jun  3 14:31:56 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 14:31:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 14:31:56 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 14:31:56 2013] Source does appear to be extended
[Mon Jun  3 14:31:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.92
[Mon Jun  3 14:31:56 2013] Source is asymmetric
[Mon Jun  3 14:32:16 2013] Writing source region out to fullrun_ccd0_acisf15218_pi14-548_pass1_cl_src4_src.reg
[Mon Jun  3 14:32:16 2013] Extracting stamp from image fullrun_ccd0_acisf15218_pi14-548_cl_sm2.00.img.gz, (324, 623) - (456, 755)
[Mon Jun  3 14:32:16 2013] Writing fullrun_ccd0_acisf15218_pi14-548_pass1_cl_src4.gif
[Mon Jun  3 14:33:57 2013] Size of ../../acisf15218/products/events/fullrun_ccd0_acisf15218_pi14-548_pass1_cl_src4_src.evt.gz[events] = 26 counts
[Mon Jun  3 14:33:57 2013] Mean chipx,y = (671.54, 659.54)
[Mon Jun  3 14:33:57 2013] Mean tdetx,y = (3720.54, 4460.46)
[Mon Jun  3 14:33:57 2013] chipx,y range = (651.00-691.00, 639.00-676.00)
[Mon Jun  3 14:33:57 2013] Size of ../../acisf15218/products/events/fullrun_ccd0_acisf15218_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 43 counts
[Mon Jun  3 14:33:58 2013] Not generating rmf since there are only 22 counts
[Mon Jun  3 14:33:58 2013] arf not found, will run specextract
[Mon Jun  3 14:34:24 2013] ../../acisf15218/products/spectra/fullrun_ccd0_acisf15218_pi14-548_pass1_cl_src4.warf not found
[Mon Jun  3 14:34:24 2013] ../../acisf15218/products/spectra/fullrun_ccd0_acisf15218_pi14-548_pass1_cl_src4.wrmf not found
[Mon Jun  3 14:34:24 2013] Removal of ../../acisf15218/products/spectra/fullrun_ccd0_acisf15218_pi14-548_pass1_cl_src4.soff failed
[Mon Jun  3 14:43:24 2013] Spectrum 4 has only 23 counts, deleting rmf
[Mon Jun  3 14:43:24 2013] 187.239
[Mon Jun  3 15:14:24 2013] Updating aperture counts using extracted products
[Mon Jun  3 15:14:24 2013] Total counts from fullrun_ccd0_acisf15218_pi14-548_pass1_cl_src4_src.pi.gz = 26.00
[Mon Jun  3 15:14:24 2013] Total counts from fullrun_ccd0_acisf15218_pi14-548_pass1_cl_src4_bgd.pi.gz = 43.00
[Mon Jun  3 15:14:24 2013] Got source and background scale factors 0.000002, 0.000076
[Mon Jun  3 15:14:24 2013] User source parameters:
  Position = (390.4, 689.0) = 9 58 4.48 2 6 1.3
  Extent = 1.4 (1.2-1.7)" x 0.4 (0.2-0.6)", rotation angle = 22 (10-31) degrees
  Source aperture counts = 24.9 +/- 6.2
  Background aperture counts = 1.1
  Rate = 0.0005 +/- 0.0001

[Mon Jun  3 15:14:26 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 15:14:26 2013] Using photon index=1.80, rate=0.000495, arf fullrun_ccd0_acisf15218_pi14-548_pass1_cl_src4.arf
[Mon Jun  3 15:14:26 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jun  3 15:14:26 2013] Updating source flux to 6.3e-15
[Mon Jun  3 15:14:37 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun  3 15:14:38 2013] acisf15218/analysis//spectral/fullrun_ccd0_acisf15218_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete