[Thu May 16 06:01:03 2013] Detection parameters:
  Position = (186.5, 624.0) = 9 58 56.73 2 36 38.1
  Extent = 0.5" x 0.5", rotation angle = 78 degrees
  Source counts = 28.4 +/- 5.4
  Background counts = 0.6
  Rate = 0.0006 +/- 0.0001

[Thu May 16 06:01:04 2013] Off-axis axis estimate = 2.83'
[Thu May 16 06:57:38 2013] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Thu May 16 06:57:38 2013] Initial guess for spatial extent in simple fitting = 0.55"
[Thu May 16 06:57:38 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.152
[Thu May 16 06:57:38 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 0.55"
[Thu May 16 07:20:27 2013] fullrun_ccd3_acisf15214_pi14-548_cl_pass0_src8.ximg exists
[Thu May 16 07:20:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15214_pi14-548_cl_pass0_src8.csv
[Thu May 16 07:20:27 2013] fullrun_ccd3_acisf15214_pi14-548_cl_pass0_src8_1.ximg exists
[Thu May 16 07:20:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15214_pi14-548_cl_pass0_src8.csv
[Thu May 16 07:20:27 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15214_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15214_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 07:20:27 2013] fullrun_ccd3_acisf15214_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Thu May 16 07:20:27 2013] fullrun_ccd3_acisf15214_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Thu May 16 07:20:27 2013] Fit fullrun_ccd3_acisf15214_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Thu May 16 07:20:37 2013] Spatial fit model total counts = 32.420700, observed total counts = 33.000000
[Thu May 16 07:20:37 2013] Offset between fit and detection position for source 3 = 0.528456 pixels
[Thu May 16 07:20:37 2013] 33.074460 total counts/ 6.521360 bgd. counts: snr = 10.397912
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.528456 pixels
  Position = (186.9, 624.3) = 9 58 56.73 2 36 38.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 26.6 +/- 5.8
  Background counts = 6.5
  Rate = 0.0006 +/- 0.0001
[Thu May 16 07:20:37 2013] Vigneting correction estimate = 1.000000
[Thu May 16 07:20:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 07:20:37 2013] Assessing source extent using major axis lower bound
[Thu May 16 07:20:37 2013] Source does appear to be extended
[Thu May 16 07:20:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 08:14:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 16 08:14:42 2013] Initial guess for spatial extent in simple fitting = 0.43"
[Thu May 16 08:14:42 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.801
[Thu May 16 08:14:42 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 0.43"
[Thu May 16 08:35:32 2013] fullrun_ccd3_acisf15214_pi14-548_cl_pass1_src8.ximg exists
[Thu May 16 08:35:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15214_pi14-548_cl_pass1_src8.csv
[Thu May 16 08:35:32 2013] fullrun_ccd3_acisf15214_pi14-548_cl_pass1_src8_1.ximg exists
[Thu May 16 08:35:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15214_pi14-548_cl_pass1_src8.csv
[Thu May 16 08:35:32 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15214_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15214_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 08:35:32 2013] fullrun_ccd3_acisf15214_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Thu May 16 08:35:32 2013] fullrun_ccd3_acisf15214_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Thu May 16 08:35:32 2013] Fit fullrun_ccd3_acisf15214_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Thu May 16 08:35:43 2013] Spatial fit model total counts = 31.610900, observed total counts = 32.000000
[Thu May 16 08:35:43 2013] Offset between fit and detection position for source 3 = 0.021762 pixels
[Thu May 16 08:35:43 2013] 32.011590 total counts/ 4.927990 bgd. counts: snr = 12.200327
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.021762 pixels
  Position = (186.9, 624.3) = 9 58 56.73 2 36 38.0
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 27.1 +/- 5.7
  Background counts = 4.9
  Rate = 0.0006 +/- 0.0001
[Thu May 16 08:35:43 2013] Vigneting correction estimate = 1.000000
[Thu May 16 08:35:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 08:35:43 2013] Assessing source extent using major axis lower bound
[Thu May 16 08:35:43 2013] Source does appear to be extended
[Thu May 16 08:35:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 09:06:57 2013] Writing source region out to fullrun_ccd3_acisf15214_pi14-548_pass1_cl_src3_src.reg
[Thu May 16 09:06:57 2013] Extracting stamp from image fullrun_ccd3_acisf15214_pi14-548_cl_sm2.00.img.gz, (167, 604) - (207, 644)
[Thu May 16 09:06:57 2013] Writing fullrun_ccd3_acisf15214_pi14-548_pass1_cl_src3.gif
[Thu May 16 09:11:14 2013] Size of ../../acisf15214/products/events/fullrun_ccd3_acisf15214_pi14-548_pass1_cl_src3_src.evt.gz[events] = 27 counts
[Thu May 16 09:11:14 2013] Mean chipx,y = (1004.00, 698.48)
[Thu May 16 09:11:14 2013] Mean tdetx,y = (4433.52, 4065.00)
[Thu May 16 09:11:14 2013] chipx,y range = (986.00-1021.00, 680.00-716.00)
[Thu May 16 09:11:14 2013] Size of ../../acisf15214/products/events/fullrun_ccd3_acisf15214_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 9 counts
[Thu May 16 09:11:15 2013] Not generating rmf since there are only 27 counts
[Thu May 16 09:11:15 2013] arf not found, will run specextract
[Thu May 16 09:11:48 2013] ../../acisf15214/products/spectra/fullrun_ccd3_acisf15214_pi14-548_pass1_cl_src3.warf not found
[Thu May 16 09:11:48 2013] ../../acisf15214/products/spectra/fullrun_ccd3_acisf15214_pi14-548_pass1_cl_src3.wrmf not found
[Thu May 16 09:11:48 2013] Removal of ../../acisf15214/products/spectra/fullrun_ccd3_acisf15214_pi14-548_pass1_cl_src3.soff failed
[Thu May 16 09:20:23 2013] Spectrum 3 has only 27 counts, deleting rmf
[Thu May 16 09:20:23 2013] 200.413
[Thu May 16 09:20:35 2013] Updating aperture counts using extracted products
[Thu May 16 09:20:35 2013] Total counts from fullrun_ccd3_acisf15214_pi14-548_pass1_cl_src3_src.pi.gz = 27.00
[Thu May 16 09:20:35 2013] Total counts from fullrun_ccd3_acisf15214_pi14-548_pass1_cl_src3_bgd.pi.gz = 9.00
[Thu May 16 09:20:35 2013] Got source and background scale factors 0.000001, 0.000007
[Thu May 16 09:20:35 2013] User source parameters:
  Position = (186.9, 624.3) = 9 58 56.73 2 36 38.0
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source aperture counts = 26.2 +/- 6.3
  Background aperture counts = 0.8
  Rate = 0.0006 +/- 0.0001

[Thu May 16 09:20:38 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 09:20:38 2013] Using photon index=1.80, rate=0.000589, arf fullrun_ccd3_acisf15214_pi14-548_pass1_cl_src3.arf
[Thu May 16 09:20:38 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May 16 09:20:38 2013] Updating source flux to 7e-15
[Thu May 16 09:20:54 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting