[Thu May 16 06:00:29 2013] Detection parameters:
  Position = (640.8, 105.9) = 9 58 57.41 2 40 2.2
  Extent = 0.6" x 0.5", rotation angle = 145 degrees
  Source counts = 10.6 +/- 3.3
  Background counts = 0.4
  Rate = 0.0002 +/- 7e-05

[Thu May 16 06:00:29 2013] Off-axis axis estimate = 1.01'
[Thu May 16 06:47:47 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu May 16 06:47:47 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Thu May 16 06:47:47 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.618
[Thu May 16 06:47:47 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 0.38"
[Thu May 16 06:57:38 2013] fullrun_ccd2_acisf15214_pi14-548_cl_pass0_src7.ximg exists
[Thu May 16 06:57:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15214_pi14-548_cl_pass0_src7.csv
[Thu May 16 06:57:38 2013] fullrun_ccd2_acisf15214_pi14-548_cl_pass0_src7_1.ximg exists
[Thu May 16 06:57:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15214_pi14-548_cl_pass0_src7.csv
[Thu May 16 06:57:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15214_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15214_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 06:57:38 2013] fullrun_ccd2_acisf15214_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Thu May 16 06:57:38 2013] fullrun_ccd2_acisf15214_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Thu May 16 06:57:38 2013] Fit fullrun_ccd2_acisf15214_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Thu May 16 07:20:35 2013] Spatial fit model total counts = 10.689400, observed total counts = 11.000000
[Thu May 16 07:20:35 2013] Offset between fit and detection position for source 4 = 0.860521 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.860521 pixels
  Position = (641.6, 106.1) = 9 58 57.40 2 40 2.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 10.7 +/- 3.3
  Background counts = 0.0
  Rate = 0.0002 +/- 7e-05
[Thu May 16 07:20:35 2013] Vigneting correction estimate = 1.000000
[Thu May 16 07:20:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 07:20:35 2013] Assessing source extent using major axis lower bound
[Thu May 16 07:20:35 2013] Source does appear to be extended
[Thu May 16 07:20:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 08:05:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 16 08:05:12 2013] Initial guess for spatial extent in simple fitting = 0.42"
[Thu May 16 08:05:12 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.820
[Thu May 16 08:05:12 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 0.42"
[Thu May 16 08:14:42 2013] fullrun_ccd2_acisf15214_pi14-548_cl_pass1_src7.ximg exists
[Thu May 16 08:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15214_pi14-548_cl_pass1_src7.csv
[Thu May 16 08:14:42 2013] fullrun_ccd2_acisf15214_pi14-548_cl_pass1_src7_1.ximg exists
[Thu May 16 08:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15214_pi14-548_cl_pass1_src7.csv
[Thu May 16 08:14:42 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15214_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15214_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 08:14:42 2013] fullrun_ccd2_acisf15214_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Thu May 16 08:14:42 2013] fullrun_ccd2_acisf15214_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Thu May 16 08:14:42 2013] Fit fullrun_ccd2_acisf15214_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Thu May 16 08:35:41 2013] Spatial fit model total counts = 10.158300, observed total counts = 11.000000
[Thu May 16 08:35:41 2013] Offset between fit and detection position for source 4 = 0.065378 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.065378 pixels
  Position = (641.7, 106.1) = 9 58 57.40 2 40 2.1
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 10.0 +/- 3.2
  Background counts = 0.0
  Rate = 0.0002 +/- 7e-05
[Thu May 16 08:35:41 2013] Vigneting correction estimate = 1.000000
[Thu May 16 08:35:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 08:35:41 2013] Assessing source extent using major axis lower bound
[Thu May 16 08:35:41 2013] Source does appear to be extended
[Thu May 16 08:35:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 08:59:18 2013] Writing source region out to fullrun_ccd2_acisf15214_pi14-548_pass1_cl_src4_src.reg
[Thu May 16 08:59:18 2013] Extracting stamp from image fullrun_ccd2_acisf15214_pi14-548_cl_sm2.00.img.gz, (623, 87) - (661, 125)
[Thu May 16 08:59:18 2013] Writing fullrun_ccd2_acisf15214_pi14-548_pass1_cl_src4.gif
[Thu May 16 09:02:50 2013] Size of ../../acisf15214/products/events/fullrun_ccd2_acisf15214_pi14-548_pass1_cl_src4_src.evt.gz[events] = 10 counts
[Thu May 16 09:02:50 2013] Mean chipx,y = (192.10, 998.50)
[Thu May 16 09:02:50 2013] Mean tdetx,y = (4059.50, 3893.90)
[Thu May 16 09:02:50 2013] chipx,y range = (184.00-205.00, 982.00-1013.00)
[Thu May 16 09:02:50 2013] Size of ../../acisf15214/products/events/fullrun_ccd2_acisf15214_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 2 counts
[Thu May 16 09:02:51 2013] Not generating rmf since there are only 10 counts
[Thu May 16 09:02:51 2013] arf not found, will run specextract
[Thu May 16 09:03:28 2013] ../../acisf15214/products/spectra/fullrun_ccd2_acisf15214_pi14-548_pass1_cl_src4.warf not found
[Thu May 16 09:03:28 2013] ../../acisf15214/products/spectra/fullrun_ccd2_acisf15214_pi14-548_pass1_cl_src4.wrmf not found
[Thu May 16 09:03:28 2013] Removal of ../../acisf15214/products/spectra/fullrun_ccd2_acisf15214_pi14-548_pass1_cl_src4.soff failed
[Thu May 16 09:06:56 2013] Spectrum 4 has only 10 counts, deleting rmf
[Thu May 16 09:06:56 2013] 194.641
[Thu May 16 09:20:33 2013] Updating aperture counts using extracted products
[Thu May 16 09:20:33 2013] Total counts from fullrun_ccd2_acisf15214_pi14-548_pass1_cl_src4_src.pi.gz = 10.00
[Thu May 16 09:20:33 2013] Total counts from fullrun_ccd2_acisf15214_pi14-548_pass1_cl_src4_bgd.pi.gz = 2.00
[Thu May 16 09:20:33 2013] Got source and background scale factors 0.000001, 0.000006
[Thu May 16 09:20:33 2013] User source parameters:
  Position = (641.7, 106.1) = 9 58 57.40 2 40 2.1
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source aperture counts = 9.8 +/- 4.3
  Background aperture counts = 0.2
  Rate = 0.0002 +/- 9e-05

[Thu May 16 09:20:34 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 09:20:34 2013] Using photon index=1.80, rate=0.000218, arf fullrun_ccd2_acisf15214_pi14-548_pass1_cl_src4.arf
[Thu May 16 09:20:34 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May 16 09:20:34 2013] Updating source flux to 2.6e-15
[Thu May 16 09:20:50 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting