[Mon May 27 05:53:05 2013] Detection parameters:
  Position = (856.9, 1075.8) = 10 1 17.70 2 33 9.3
  Extent = 0.5" x 0.5", rotation angle = 44 degrees
  Source counts = 23.7 +/- 4.9
  Background counts = 0.3
  Rate = 0.001 +/- 0.0002

[Mon May 27 05:53:05 2013] Off-axis axis estimate = 2.72'
[Mon May 27 06:15:47 2013] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Mon May 27 06:15:47 2013] Initial guess for spatial extent in simple fitting = 0.53"
[Mon May 27 06:15:47 2013] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.911
[Mon May 27 06:15:47 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 0.53"
[Mon May 27 06:29:21 2013] fullrun_ccd1_acisf15209_pi14-548_cl_pass0_src6.ximg exists
[Mon May 27 06:29:21 2013] fullrun_ccd1_acisf15209_pi14-548_cl_pass0_src6_1.ximg exists
[Mon May 27 06:29:21 2013] Fit fullrun_ccd1_acisf15209_pi14-548_cl_pass0_src6 appears to have run properly
[Mon May 27 06:29:21 2013] fullrun_ccd1_acisf15209_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Mon May 27 06:29:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf15209_pi14-548_cl_pass0_tfrozen_src6.csv
[Mon May 27 06:29:21 2013] fullrun_ccd1_acisf15209_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Mon May 27 06:29:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf15209_pi14-548_cl_pass0_tfrozen_src6.csv
[Mon May 27 06:29:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf15209_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf15209_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 06:48:37 2013] Spatial fit model total counts = 22.564900, observed total counts = 25.000000
[Mon May 27 06:48:37 2013] Offset between fit and detection position for source 1 = 0.720023 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.720023 pixels
  Position = (857.4, 1076.3) = 10 1 17.70 2 33 9.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 23.1 +/- 4.8
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Mon May 27 06:48:37 2013] Vigneting correction estimate = 1.000000
[Mon May 27 06:48:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 06:48:37 2013] Assessing source extent using major axis lower bound
[Mon May 27 06:48:37 2013] Source does appear to be extended
[Mon May 27 06:48:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 07:01:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 07:01:31 2013] Initial guess for spatial extent in simple fitting = 0.54"
[Mon May 27 07:01:31 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.877
[Mon May 27 07:01:31 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 0.54"
[Mon May 27 07:13:27 2013] fullrun_ccd1_acisf15209_pi14-548_cl_pass1_src6.ximg exists
[Mon May 27 07:13:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf15209_pi14-548_cl_pass1_src6.csv
[Mon May 27 07:13:27 2013] fullrun_ccd1_acisf15209_pi14-548_cl_pass1_src6_1.ximg exists
[Mon May 27 07:13:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf15209_pi14-548_cl_pass1_src6.csv
[Mon May 27 07:13:27 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf15209_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf15209_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 07:13:27 2013] fullrun_ccd1_acisf15209_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Mon May 27 07:13:27 2013] fullrun_ccd1_acisf15209_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Mon May 27 07:13:27 2013] Fit fullrun_ccd1_acisf15209_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Mon May 27 07:31:13 2013] Spatial fit model total counts = 23.235600, observed total counts = 25.000000
[Mon May 27 07:31:13 2013] Offset between fit and detection position for source 1 = 0.015901 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015901 pixels
  Position = (857.4, 1076.3) = 10 1 17.70 2 33 9.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 23.8 +/- 4.9
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Mon May 27 07:31:13 2013] Vigneting correction estimate = 1.000000
[Mon May 27 07:31:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 07:31:13 2013] Assessing source extent using major axis lower bound
[Mon May 27 07:31:13 2013] Source does appear to be extended
[Mon May 27 07:31:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 07:37:20 2013] Writing source region out to fullrun_ccd1_acisf15209_pi14-548_pass1_cl_src1_src.reg
[Mon May 27 07:37:20 2013] Extracting stamp from image fullrun_ccd1_acisf15209_pi14-548_cl_sm2.00.img.gz, (833, 1052) - (881, 1100)
[Mon May 27 07:37:20 2013] Writing fullrun_ccd1_acisf15209_pi14-548_pass1_cl_src1.gif
[Mon May 27 07:39:51 2013] Size of ../../acisf15209/products/events/fullrun_ccd1_acisf15209_pi14-548_pass1_cl_src1_src.evt.gz[events] = 24 counts
[Mon May 27 07:39:51 2013] Mean chipx,y = (190.50, 849.62)
[Mon May 27 07:39:51 2013] Mean tdetx,y = (4282.38, 4297.50)
[Mon May 27 07:39:51 2013] chipx,y range = (170.00-203.00, 834.00-869.00)
[Mon May 27 07:39:51 2013] Size of ../../acisf15209/products/events/fullrun_ccd1_acisf15209_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 4 counts
[Mon May 27 07:39:52 2013] Not generating rmf since there are only 23 counts
[Mon May 27 07:39:52 2013] arf not found, will run specextract
[Mon May 27 07:40:17 2013] ../../acisf15209/products/spectra/fullrun_ccd1_acisf15209_pi14-548_pass1_cl_src1.warf not found
[Mon May 27 07:40:17 2013] ../../acisf15209/products/spectra/fullrun_ccd1_acisf15209_pi14-548_pass1_cl_src1.wrmf not found
[Mon May 27 07:40:17 2013] Removal of ../../acisf15209/products/spectra/fullrun_ccd1_acisf15209_pi14-548_pass1_cl_src1.soff failed
[Mon May 27 07:45:30 2013] Spectrum 1 has only 24 counts, deleting rmf
[Mon May 27 07:45:30 2013] 197.489
[Mon May 27 08:01:06 2013] Updating aperture counts using extracted products
[Mon May 27 08:01:06 2013] Total counts from fullrun_ccd1_acisf15209_pi14-548_pass1_cl_src1_src.pi.gz = 24.00
[Mon May 27 08:01:06 2013] Total counts from fullrun_ccd1_acisf15209_pi14-548_pass1_cl_src1_bgd.pi.gz = 4.00
[Mon May 27 08:01:06 2013] Got source and background scale factors 0.000001, 0.000010
[Mon May 27 08:01:06 2013] User source parameters:
  Position = (857.4, 1076.3) = 10 1 17.70 2 33 9.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source aperture counts = 23.7 +/- 6.0
  Background aperture counts = 0.3
  Rate = 0.001 +/- 0.0003

[Mon May 27 08:01:07 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 08:01:07 2013] Using photon index=1.80, rate=0.001, arf fullrun_ccd1_acisf15209_pi14-548_pass1_cl_src1.arf
[Mon May 27 08:01:07 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 27 08:01:07 2013] Updating source flux to 1.2e-14
[Mon May 27 08:01:14 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting