[Thu May 16 09:45:51 2013] Detection parameters:
  Position = (160.8, 608.3) = 4 29 1.83 71 1 11.5
  Extent = 2.6" x 2.3", rotation angle = 13 degrees
  Source counts = 75.8 +/- 9.8
  Background counts = 20.2
  Rate = 0.005 +/- 0.0007

[Thu May 16 09:45:52 2013] Off-axis axis estimate = 9.86'
[Thu May 16 10:36:02 2013] Using EEF radius (= 4.30 ")to estimate initial spatial extent for simple fitting
[Thu May 16 10:36:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 16 10:36:02 2013] Initial guess for spatial extent in simple fitting = 4.30"
[Thu May 16 10:36:02 2013] source mask rpix=8.7, npix_max = 342, mask sum = 342, frac = 1.000
[Thu May 16 10:36:02 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 4.30"
[Thu May 16 10:45:03 2013] fullrun_ccd6_acisf15194_pi14-548_cl_pass0_src1.ximg exists
[Thu May 16 10:45:03 2013] fullrun_ccd6_acisf15194_pi14-548_cl_pass0_src1_1.ximg exists
[Thu May 16 10:45:03 2013] Fit fullrun_ccd6_acisf15194_pi14-548_cl_pass0_src1 appears to have run properly
[Thu May 16 10:45:03 2013] fullrun_ccd6_acisf15194_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu May 16 10:45:03 2013] fullrun_ccd6_acisf15194_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 16 10:45:03 2013] Fit fullrun_ccd6_acisf15194_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 16 10:50:40 2013] Spatial fit model total counts = 107.478000, observed total counts = 107.000000
[Thu May 16 10:50:40 2013] Offset between fit and detection position for source 1 = 2.040927 pixels
[Thu May 16 10:50:40 2013] 107.779000 total counts/ 10.395700 bgd. counts: snr = 30.203524
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.040927 pixels
  Position = (159.6, 606.6) = 4 29 1.99 71 1 10.5
  Extent = 5.3 (4.5-6.4)", rotation angle = 0
  Source counts = 97.4 +/- 10.4
  Background counts = 10.4
  Rate = 0.007 +/- 0.0007
[Thu May 16 10:50:40 2013] Vigneting correction estimate = 1.000000
[Thu May 16 10:50:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 10:50:40 2013] Assessing source extent using major axis lower bound
[Thu May 16 10:50:40 2013] Source does appear to be extended
[Thu May 16 10:50:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 11:34:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 16 11:34:15 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 16 11:34:15 2013] Initial guess for spatial extent in simple fitting = 5.33"
[Thu May 16 11:34:15 2013] source mask rpix=10.8, npix_max = 514, mask sum = 529, frac = 1.029
[Thu May 16 11:34:15 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.33"
[Thu May 16 11:44:45 2013] fullrun_ccd6_acisf15194_pi14-548_cl_pass1_src1.ximg exists
[Thu May 16 11:44:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15194_pi14-548_cl_pass1_src1.csv
[Thu May 16 11:44:45 2013] fullrun_ccd6_acisf15194_pi14-548_cl_pass1_src1_1.ximg exists
[Thu May 16 11:44:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15194_pi14-548_cl_pass1_src1.csv
[Thu May 16 11:44:45 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf15194_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf15194_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 11:44:45 2013] fullrun_ccd6_acisf15194_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu May 16 11:44:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15194_pi14-548_cl_pass1_tfrozen_src1.csv
[Thu May 16 11:44:45 2013] fullrun_ccd6_acisf15194_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 16 11:44:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15194_pi14-548_cl_pass1_tfrozen_src1.csv
[Thu May 16 11:44:45 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf15194_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf15194_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 11:50:07 2013] Warning, spatial fit 1 centroid is now closest to src. 2
[Thu May 16 11:50:07 2013] Vigneting correction estimate = 1.000000
[Thu May 16 11:50:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 11:50:07 2013] Assessing source extent using major axis lower bound
[Thu May 16 11:50:07 2013] Source does appear to be extended
[Thu May 16 11:50:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 11:52:34 2013] Writing source region out to fullrun_ccd6_acisf15194_pi14-548_pass1_cl_src1_src.reg
[Thu May 16 11:52:34 2013] Extracting stamp from image fullrun_ccd6_acisf15194_pi14-548_cl_sm2.00.img.gz, (0, 363) - (403, 850)
[Thu May 16 11:52:34 2013] Writing fullrun_ccd6_acisf15194_pi14-548_pass1_cl_src1.gif
[Thu May 16 11:52:35 2013] Size of ../../acisf15194/products/events/fullrun_ccd6_acisf15194_pi14-548_pass1_cl_src1_src.evt.gz[events] = 109 counts
[Thu May 16 11:52:35 2013] Mean chipx,y = (36.46, 395.43)
[Thu May 16 11:52:35 2013] Mean tdetx,y = (2911.46, 2097.43)
[Thu May 16 11:52:35 2013] chipx,y range = (4.00-78.00, 347.00-433.00)
[Thu May 16 11:52:35 2013] Size of ../../acisf15194/products/events/fullrun_ccd6_acisf15194_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 134 counts
[Thu May 16 11:52:36 2013] Not generating rmf since there are only 97 counts
[Thu May 16 11:52:36 2013] arf not found, will run specextract
[Thu May 16 11:53:00 2013] ../../acisf15194/products/spectra/fullrun_ccd6_acisf15194_pi14-548_pass1_cl_src1.warf not found
[Thu May 16 11:53:00 2013] ../../acisf15194/products/spectra/fullrun_ccd6_acisf15194_pi14-548_pass1_cl_src1.wrmf not found
[Thu May 16 11:53:00 2013] Removal of ../../acisf15194/products/spectra/fullrun_ccd6_acisf15194_pi14-548_pass1_cl_src1.soff failed
[Thu May 16 11:55:43 2013] Spectrum 1 has only 97 counts, deleting rmf
[Thu May 16 11:55:43 2013] 140.16
[Thu May 16 11:58:37 2013] Updating aperture counts using extracted products
[Thu May 16 11:58:37 2013] Total counts from fullrun_ccd6_acisf15194_pi14-548_pass1_cl_src1_src.pi.gz = 109.00
[Thu May 16 11:58:37 2013] Total counts from fullrun_ccd6_acisf15194_pi14-548_pass1_cl_src1_bgd.pi.gz = 134.00
[Thu May 16 11:58:37 2013] Got source and background scale factors 0.000088, 0.001039
[Thu May 16 11:58:37 2013] User source parameters:
  Position = (159.6, 606.6) = 4 29 1.99 71 1 10.5
  Extent = 5.3 (4.5-6.4)", rotation angle = 0
  Source aperture counts = 97.7 +/- 11.5
  Background aperture counts = 11.3
  Rate = 0.007 +/- 0.0008

[Thu May 16 11:58:37 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 11:58:37 2013] Using photon index=1.80, rate=0.00663, arf fullrun_ccd6_acisf15194_pi14-548_pass1_cl_src1.arf
[Thu May 16 11:58:37 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May 16 11:58:37 2013] Updating source flux to 9.7e-14
[Thu May 16 11:58:45 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 16 11:58:46 2013] acisf15194/analysis//spectral/fullrun_ccd6_acisf15194_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete