[Sat Jul 27 13:56:07 2013] Detection parameters:
  Position = (368.0, 285.6) = 11 42 46.16 58 31 13.5
  Extent = 0.6" x 0.5", rotation angle = 149 degrees
  Source counts = 25.3 +/- 5.1
  Background counts = 0.7
  Rate = 0.0008 +/- 0.0002

[Sat Jul 27 13:56:07 2013] Off-axis axis estimate = 3.25'
[Sat Jul 27 14:48:17 2013] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Sat Jul 27 14:48:17 2013] Initial guess for spatial extent in simple fitting = 0.63"
[Sat Jul 27 14:48:17 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.941
[Sat Jul 27 14:48:17 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 0.63"
[Sat Jul 27 15:12:13 2013] fullrun_ccd3_acisf15136_pi14-548_cl_pass0_src10.ximg exists
[Sat Jul 27 15:12:13 2013] fullrun_ccd3_acisf15136_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Jul 27 15:12:13 2013] Fit fullrun_ccd3_acisf15136_pi14-548_cl_pass0_src10 appears to have run properly
[Sat Jul 27 15:12:13 2013] fullrun_ccd3_acisf15136_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Jul 27 15:12:13 2013] fullrun_ccd3_acisf15136_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jul 27 15:12:13 2013] Fit fullrun_ccd3_acisf15136_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Jul 27 15:30:04 2013] Spatial fit model total counts = 28.760200, observed total counts = 29.000000
[Sat Jul 27 15:30:04 2013] Offset between fit and detection position for source 3 = 0.798432 pixels
[Sat Jul 27 15:30:04 2013] 28.728490 total counts/ 4.465090 bgd. counts: snr = 11.482503
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.798432 pixels
  Position = (368.7, 286.0) = 11 42 46.14 58 31 13.4
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 24.3 +/- 5.4
  Background counts = 4.5
  Rate = 0.0007 +/- 0.0002
[Sat Jul 27 15:30:04 2013] Vigneting correction estimate = 1.000000
[Sat Jul 27 15:30:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 27 15:30:04 2013] Assessing source extent using major axis lower bound
[Sat Jul 27 15:30:04 2013] Source does appear to be extended
[Sat Jul 27 15:30:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 27 16:20:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 27 16:20:42 2013] Initial guess for spatial extent in simple fitting = 0.57"
[Sat Jul 27 16:20:42 2013] source mask rpix=1.2, npix_max = 10, mask sum = 12, frac = 1.092
[Sat Jul 27 16:20:42 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 0.57"
[Sat Jul 27 16:44:21 2013] fullrun_ccd3_acisf15136_pi14-548_cl_pass1_src10.ximg exists
[Sat Jul 27 16:44:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15136_pi14-548_cl_pass1_src10.csv
[Sat Jul 27 16:44:21 2013] fullrun_ccd3_acisf15136_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Jul 27 16:44:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15136_pi14-548_cl_pass1_src10.csv
[Sat Jul 27 16:44:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15136_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15136_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 27 16:44:21 2013] fullrun_ccd3_acisf15136_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Jul 27 16:44:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15136_pi14-548_cl_pass1_tfrozen_src10.csv
[Sat Jul 27 16:44:21 2013] fullrun_ccd3_acisf15136_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jul 27 16:44:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15136_pi14-548_cl_pass1_tfrozen_src10.csv
[Sat Jul 27 16:44:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15136_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15136_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 27 17:09:24 2013] Spatial fit model total counts = 24.589600, observed total counts = 27.000000
[Sat Jul 27 17:09:24 2013] Offset between fit and detection position for source 3 = 0.031000 pixels
[Sat Jul 27 17:09:24 2013] 25.119872 total counts/ 0.029372 bgd. counts: snr = 146.400000
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.031000 pixels
  Position = (368.7, 286.0) = 11 42 46.15 58 31 13.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 25.1 +/- 5.0
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Sat Jul 27 17:09:24 2013] Vigneting correction estimate = 1.000000
[Sat Jul 27 17:09:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 27 17:09:24 2013] Assessing source extent using major axis lower bound
[Sat Jul 27 17:09:24 2013] Source does appear to be extended
[Sat Jul 27 17:09:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 27 17:22:17 2013] Writing source region out to fullrun_ccd3_acisf15136_pi14-548_pass1_cl_src3_src.reg
[Sat Jul 27 17:22:17 2013] Extracting stamp from image fullrun_ccd3_acisf15136_pi14-548_cl_sm2.00.img.gz, (343, 260) - (394, 312)
[Sat Jul 27 17:22:17 2013] Writing fullrun_ccd3_acisf15136_pi14-548_pass1_cl_src3.gif
[Sat Jul 27 17:27:24 2013] Size of ../../acisf15136/products/events/fullrun_ccd3_acisf15136_pi14-548_pass1_cl_src3_src.evt.gz[events] = 25 counts
[Sat Jul 27 17:27:24 2013] Mean chipx,y = (331.44, 759.12)
[Sat Jul 27 17:27:24 2013] Mean tdetx,y = (4372.88, 3392.44)
[Sat Jul 27 17:27:24 2013] chipx,y range = (314.00-350.00, 745.00-776.00)
[Sat Jul 27 17:27:24 2013] Size of ../../acisf15136/products/events/fullrun_ccd3_acisf15136_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 13 counts
[Sat Jul 27 17:27:25 2013] Not generating rmf since there are only 25 counts
[Sat Jul 27 17:27:25 2013] arf not found, will run specextract
[Sat Jul 27 17:27:58 2013] ../../acisf15136/products/spectra/fullrun_ccd3_acisf15136_pi14-548_pass1_cl_src3.warf not found
[Sat Jul 27 17:27:58 2013] ../../acisf15136/products/spectra/fullrun_ccd3_acisf15136_pi14-548_pass1_cl_src3.wrmf not found
[Sat Jul 27 17:27:58 2013] Removal of ../../acisf15136/products/spectra/fullrun_ccd3_acisf15136_pi14-548_pass1_cl_src3.soff failed
[Sat Jul 27 17:37:19 2013] Spectrum 3 has only 25 counts, deleting rmf
[Sat Jul 27 17:37:20 2013] 191.012
[Sat Jul 27 17:38:03 2013] Updating aperture counts using extracted products
[Sat Jul 27 17:38:03 2013] Total counts from fullrun_ccd3_acisf15136_pi14-548_pass1_cl_src3_src.pi.gz = 25.00
[Sat Jul 27 17:38:03 2013] Total counts from fullrun_ccd3_acisf15136_pi14-548_pass1_cl_src3_bgd.pi.gz = 13.00
[Sat Jul 27 17:38:03 2013] Got source and background scale factors 0.000001, 0.000012
[Sat Jul 27 17:38:03 2013] User source parameters:
  Position = (368.7, 286.0) = 11 42 46.15 58 31 13.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source aperture counts = 23.9 +/- 6.1
  Background aperture counts = 1.1
  Rate = 0.0007 +/- 0.0002

[Sat Jul 27 17:38:05 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jul 27 17:38:05 2013] Using photon index=1.80, rate=0.000768, arf fullrun_ccd3_acisf15136_pi14-548_pass1_cl_src3.arf
[Sat Jul 27 17:38:05 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jul 27 17:38:05 2013] Updating source flux to 9.9e-15
[Sat Jul 27 17:38:13 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jul 27 17:38:14 2013] acisf15136/analysis//spectral/fullrun_ccd3_acisf15136_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete