[Tue Dec 1 02:24:04 2009] Detection parameters: Position = (800.3, 546.5) = 3 19 39.08 41 30 11.5 Extent = 0.5" x 0.5", rotation angle = 142 degrees Source counts = 21.7 +/- 14.7 Background counts = 194.3 Rate = 0.0009 +/- 0.0006 [Tue Dec 1 02:24:10 2009] Off-axis axis estimate = 2.82' [Tue Dec 1 02:56:13 2009] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting [Tue Dec 1 02:56:13 2009] Initial guess for spatial extent in simple fitting = 0.55" [Tue Dec 1 02:56:13 2009] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.870 [Tue Dec 1 02:56:13 2009] Giving source the simple spatial ID 41 for pass 0, mean size = 0.55" [Tue Dec 1 03:53:39 2009] fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src41.ximg exists [Tue Dec 1 03:53:39 2009] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src41.csv [Tue Dec 1 03:53:39 2009] fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src41_1.ximg exists [Tue Dec 1 03:53:39 2009] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src41.csv [Tue Dec 1 03:53:39 2009] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src41_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Dec 1 03:53:40 2009] fullrun_ccd7_acisf01513_pi14-548_cl_pass0_tfrozen_src41.ximg exists [Tue Dec 1 03:53:40 2009] fullrun_ccd7_acisf01513_pi14-548_cl_pass0_tfrozen_src41_1.ximg exists [Tue Dec 1 03:53:40 2009] Fit fullrun_ccd7_acisf01513_pi14-548_cl_pass0_tfrozen_src41 appears to have run properly [Tue Dec 1 03:53:52 2009] Spatial fit model total counts = 1231.190000, observed total counts = 1210.000000 [Tue Dec 1 03:53:52 2009] Offset between fit and detection position for source 40 = 0.250005 pixels [Tue Dec 1 03:53:52 2009] 1224.519400 total counts/ 1193.690000 bgd. counts: snr = 0.892317 Spatial fit parameters: Offset between fit and detection position for source 40 = 0.250005 pixels Position = (800.6, 546.4) = 3 19 39.09 41 30 11.3 Extent = 0.7 (0.1-1.5)", rotation angle = 0 Source counts = 30.8 +/- 35.0 Background counts = 1193.7 Rate = 0.001 +/- 0.001 Deleting source due to low Poisson probability