[Tue Dec 1 02:24:04 2009] Detection parameters: Position = (912.5, 537.6) = 3 19 34.17 41 30 7.1 Extent = 0.5" x 0.5", rotation angle = 29 degrees Source counts = 13.3 +/- 7.6 Background counts = 43.7 Rate = 0.0005 +/- 0.0003 [Tue Dec 1 02:24:10 2009] Off-axis axis estimate = 3.48' [Tue Dec 1 02:56:13 2009] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting [Tue Dec 1 02:56:13 2009] Initial guess for spatial extent in simple fitting = 0.69" [Tue Dec 1 02:56:13 2009] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.835 [Tue Dec 1 02:56:13 2009] Giving source the simple spatial ID 62 for pass 0, mean size = 0.69" [Tue Dec 1 03:53:39 2009] fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src62.ximg exists [Tue Dec 1 03:53:39 2009] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src62.csv [Tue Dec 1 03:53:39 2009] fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src62_1.ximg exists [Tue Dec 1 03:53:39 2009] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src62.csv [Tue Dec 1 03:53:39 2009] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src62_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Dec 1 03:53:40 2009] fullrun_ccd7_acisf01513_pi14-548_cl_pass0_tfrozen_src62.ximg exists [Tue Dec 1 03:53:40 2009] fullrun_ccd7_acisf01513_pi14-548_cl_pass0_tfrozen_src62_1.ximg exists [Tue Dec 1 03:53:40 2009] Fit fullrun_ccd7_acisf01513_pi14-548_cl_pass0_tfrozen_src62 appears to have run properly [Tue Dec 1 03:53:52 2009] Spatial fit model total counts = 522.248000, observed total counts = 527.000000 [Tue Dec 1 03:53:52 2009] Offset between fit and detection position for source 37 = 1.199934 pixels [Tue Dec 1 03:53:52 2009] 506.980400 total counts/ 494.555000 bgd. counts: snr = 0.558731 Spatial fit parameters: Offset between fit and detection position for source 37 = 1.199934 pixels Position = (913.1, 538.7) = 3 19 34.16 41 30 7.4 Extent = 0.4 (0.2-0.8)", rotation angle = 0 Source counts = 12.4 +/- 22.5 Background counts = 494.6 Rate = 0.0005 +/- 0.0009 Deleting source due to low Poisson probability