[Tue Dec 1 02:24:04 2009] Detection parameters: Position = (456.5, 563.5) = 3 19 54.14 41 30 19.9 Extent = 0.7" x 0.7", rotation angle = 157 degrees Source counts = 90.4 +/- 26.6 Background counts = 615.6 Rate = 0.004 +/- 0.001 [Tue Dec 1 02:24:10 2009] Off-axis axis estimate = 2.34' [Tue Dec 1 02:56:13 2009] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting [Tue Dec 1 02:56:13 2009] Initial guess for spatial extent in simple fitting = 0.47" [Tue Dec 1 02:56:13 2009] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.065 [Tue Dec 1 02:56:13 2009] Giving source the simple spatial ID 20 for pass 0, mean size = 0.47" [Tue Dec 1 03:53:39 2009] fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src20.ximg exists [Tue Dec 1 03:53:39 2009] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src20.csv [Tue Dec 1 03:53:39 2009] fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src20_1.ximg exists [Tue Dec 1 03:53:39 2009] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src20.csv [Tue Dec 1 03:53:39 2009] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src20_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf01513_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Dec 1 03:53:39 2009] fullrun_ccd7_acisf01513_pi14-548_cl_pass0_tfrozen_src20.ximg exists [Tue Dec 1 03:53:39 2009] fullrun_ccd7_acisf01513_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists [Tue Dec 1 03:53:39 2009] Fit fullrun_ccd7_acisf01513_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly [Tue Dec 1 03:53:52 2009] Spatial fit model total counts = 1895.000000, observed total counts = 1895.000000 [Tue Dec 1 03:53:52 2009] Offset between fit and detection position for source 23 = 0.416809 pixels [Tue Dec 1 03:53:52 2009] 1912.814000 total counts/ 1876.940000 bgd. counts: snr = 0.828046 Spatial fit parameters: Offset between fit and detection position for source 23 = 0.416809 pixels Position = (456.6, 563.9) = 3 19 54.15 41 30 19.9 Extent = 0.6 (0.1-1.5)", rotation angle = 0 Source counts = 35.9 +/- 43.7 Background counts = 1876.9 Rate = 0.001 +/- 0.002 Deleting source due to low Poisson probability