[Fri Aug 14 23:54:29 2015] Detection parameters:
  Position = (1103.3, 721.5) = 14 13 48.46 71 11 26.5
  Extent = 0.6" x 0.5", rotation angle = 143 degrees
  Source counts = 16.6 +/- 4.1
  Background counts = 0.4
  Rate = 0.0009 +/- 0.0002

[Fri Aug 14 23:54:29 2015] Off-axis axis estimate = 3.78'
[Fri Aug 14 23:57:27 2015] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Fri Aug 14 23:57:27 2015] Initial guess for spatial extent in simple fitting = 0.77"
[Fri Aug 14 23:57:27 2015] source mask rpix=1.6, npix_max = 16, mask sum = 20, frac = 1.179
[Fri Aug 14 23:57:27 2015] Giving source the simple spatial ID 6 for pass 0, mean size = 0.77"
[Sat Aug 15 00:01:03 2015] fullrun_ccd2_acisf15129_pi14-548_cl_pass0_src6.ximg exists
[Sat Aug 15 00:01:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15129_pi14-548_cl_pass0_src6.csv
[Sat Aug 15 00:01:03 2015] fullrun_ccd2_acisf15129_pi14-548_cl_pass0_src6_1.ximg exists
[Sat Aug 15 00:01:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15129_pi14-548_cl_pass0_src6.csv
[Sat Aug 15 00:01:03 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15129_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15129_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 15 00:01:03 2015] fullrun_ccd2_acisf15129_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sat Aug 15 00:01:03 2015] fullrun_ccd2_acisf15129_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Aug 15 00:01:03 2015] Fit fullrun_ccd2_acisf15129_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Aug 15 00:05:01 2015] Spatial fit model total counts = 24.085900, observed total counts = 27.000000
[Sat Aug 15 00:05:01 2015] Offset between fit and detection position for source 13 = 1.674118 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.674118 pixels
  Position = (1103.6, 723.1) = 14 13 48.41 71 11 27.2
  Extent = 1.5 (1.5-3.1)" x 0.6 (0.5-0.8)", rotation angle = 98 (88-107) degrees
  Source counts = 24.2 +/- 4.9
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Sat Aug 15 00:05:01 2015] Vigneting correction estimate = 1.000000
[Sat Aug 15 00:05:01 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 15 00:05:01 2015] Assessing source extent using major axis lower bound
[Sat Aug 15 00:05:01 2015] Source does appear to be extended
[Sat Aug 15 00:05:01 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.82
[Sat Aug 15 00:05:01 2015] Source is asymmetric
[Sat Aug 15 00:05:12 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 15 00:05:12 2015] Initial guess for spatial extent in simple fitting = 1.07"
[Sat Aug 15 00:05:12 2015] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.047
[Sat Aug 15 00:05:12 2015] Giving source the simple spatial ID 6 for pass 1, mean size = 1.07"
[Sat Aug 15 00:09:18 2015] fullrun_ccd2_acisf15129_pi14-548_cl_pass1_src6.ximg exists
[Sat Aug 15 00:09:18 2015] fullrun_ccd2_acisf15129_pi14-548_cl_pass1_src6_1.ximg exists
[Sat Aug 15 00:09:18 2015] Fit fullrun_ccd2_acisf15129_pi14-548_cl_pass1_src6 appears to have run properly
[Sat Aug 15 00:09:18 2015] fullrun_ccd2_acisf15129_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sat Aug 15 00:09:18 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15129_pi14-548_cl_pass1_tfrozen_src6.csv
[Sat Aug 15 00:09:18 2015] fullrun_ccd2_acisf15129_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Aug 15 00:09:18 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15129_pi14-548_cl_pass1_tfrozen_src6.csv
[Sat Aug 15 00:09:18 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15129_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15129_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 15 00:12:41 2015] Spatial fit model total counts = 28.251000, observed total counts = 30.000000
[Sat Aug 15 00:12:41 2015] Offset between fit and detection position for source 13 = 0.411113 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.411113 pixels
  Position = (1103.5, 723.5) = 14 13 48.42 71 11 27.4
  Extent = 2.1 (1.5-4.3)" x 0.6 (0.5-0.8)", rotation angle = 99 (92-111) degrees
  Source counts = 28.2 +/- 5.3
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Sat Aug 15 00:12:41 2015] Vigneting correction estimate = 1.000000
[Sat Aug 15 00:12:41 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 15 00:12:41 2015] Assessing source extent using major axis lower bound
[Sat Aug 15 00:12:41 2015] Source does appear to be extended
[Sat Aug 15 00:12:41 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.83
[Sat Aug 15 00:12:41 2015] Source is asymmetric