[Mon May 11 21:43:12 2015] Detection parameters:
  Position = (589.5, 1001.8) = 11 28 48.35 58 37 39.0
  Extent = 0.6" x 0.5", rotation angle = 111 degrees
  Source counts = 11.9 +/- 3.7
  Background counts = 2.1
  Rate = 0.0002 +/- 7e-05

[Mon May 11 21:43:12 2015] Off-axis axis estimate = 4.57'
[Mon May 11 21:43:58 2015] Using EEF radius (= 1.02 ")to estimate initial spatial extent for simple fitting
[Mon May 11 21:43:58 2015] Initial guess for spatial extent in simple fitting = 1.02"
[Mon May 11 21:43:58 2015] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.949
[Mon May 11 21:43:58 2015] Giving source the simple spatial ID 44 for pass 0, mean size = 1.02"
[Mon May 11 21:44:00 2015] fullrun_ccd7_acisf15077_pi14-548_cl_pass0_src44.ximg exists
[Mon May 11 21:44:00 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15077_pi14-548_cl_pass0_src44.csv
[Mon May 11 21:44:00 2015] fullrun_ccd7_acisf15077_pi14-548_cl_pass0_src44_1.ximg exists
[Mon May 11 21:44:00 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15077_pi14-548_cl_pass0_src44.csv
[Mon May 11 21:44:00 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15077_pi14-548_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15077_pi14-548_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 11 21:44:00 2015] fullrun_ccd7_acisf15077_pi14-548_cl_pass0_tfrozen_src44.ximg exists
[Mon May 11 21:44:00 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15077_pi14-548_cl_pass0_tfrozen_src44.csv
[Mon May 11 21:44:00 2015] fullrun_ccd7_acisf15077_pi14-548_cl_pass0_tfrozen_src44_1.ximg exists
[Mon May 11 21:44:00 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15077_pi14-548_cl_pass0_tfrozen_src44.csv
[Mon May 11 21:44:00 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15077_pi14-548_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15077_pi14-548_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 11 21:44:11 2015] Spatial fit model total counts = 17.095000, observed total counts = 19.000000
[Mon May 11 21:44:11 2015] Offset between fit and detection position for source 44 = 1.242388 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 1.242388 pixels
  Position = (590.2, 1002.8) = 11 28 48.31 58 37 39.3
  Extent = 1.2 (0.7-1.9)" x 0.7 (0.5-1.1)", rotation angle = 80 (53-135) degrees
  Source counts = 17.6 +/- 4.2
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Mon May 11 21:44:11 2015] Vigneting correction estimate = 1.000000
[Mon May 11 21:44:11 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 11 21:44:11 2015] Assessing source extent using major axis lower bound
[Mon May 11 21:44:11 2015] Source does appear to be extended
[Mon May 11 21:44:11 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.68
[Mon May 11 21:44:11 2015] Deleting source due to low Poisson probability 0.9