[Mon May 11 21:43:12 2015] Detection parameters:
  Position = (550.3, 88.4) = 11 28 50.75 58 30 9.6
  Extent = 0.9" x 0.6", rotation angle = 143 degrees
  Source counts = 21.7 +/- 5.0
  Background counts = 3.3
  Rate = 0.0004 +/- 0.0001

[Mon May 11 21:43:12 2015] Off-axis axis estimate = 4.28'
[Mon May 11 21:43:58 2015] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Mon May 11 21:43:58 2015] Initial guess for spatial extent in simple fitting = 0.92"
[Mon May 11 21:43:58 2015] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.117
[Mon May 11 21:43:58 2015] Giving source the simple spatial ID 33 for pass 0, mean size = 0.92"
[Mon May 11 21:43:59 2015] fullrun_ccd7_acisf15077_pi14-548_cl_pass0_src33.ximg exists
[Mon May 11 21:43:59 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15077_pi14-548_cl_pass0_src33.csv
[Mon May 11 21:43:59 2015] fullrun_ccd7_acisf15077_pi14-548_cl_pass0_src33_1.ximg exists
[Mon May 11 21:44:00 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15077_pi14-548_cl_pass0_src33.csv
[Mon May 11 21:44:00 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15077_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15077_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 11 21:44:00 2015] fullrun_ccd7_acisf15077_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Mon May 11 21:44:00 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15077_pi14-548_cl_pass0_tfrozen_src33.csv
[Mon May 11 21:44:00 2015] fullrun_ccd7_acisf15077_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Mon May 11 21:44:00 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15077_pi14-548_cl_pass0_tfrozen_src33.csv
[Mon May 11 21:44:00 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15077_pi14-548_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15077_pi14-548_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 11 21:44:11 2015] Spatial fit model total counts = 22.694300, observed total counts = 28.000000
[Mon May 11 21:44:11 2015] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 11 21:44:11 2015] Vigneting correction estimate = 1.000000
[Mon May 11 21:44:11 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 11 21:44:11 2015] Assessing source extent using major
[Mon May 11 21:44:11 2015] Source does appear to be extended
[Mon May 11 21:44:11 2015] Computing asymmetry using major and minor axis, asym = 1.47
[Mon May 11 21:44:11 2015] Deleting source due to low Poisson probability 0.9