[Mon May 11 21:43:10 2015] Detection parameters:
  Position = (223.6, 467.1) = 11 28 5.80 58 33 14.3
  Extent = 0.9" x 0.5", rotation angle = 32 degrees
  Source counts = 20.4 +/- 4.7
  Background counts = 1.6
  Rate = 0.0004 +/- 9e-05

[Mon May 11 21:43:11 2015] Off-axis axis estimate = 3.39'
[Mon May 11 21:43:58 2015] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Mon May 11 21:43:58 2015] Initial guess for spatial extent in simple fitting = 0.67"
[Mon May 11 21:43:58 2015] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.874
[Mon May 11 21:43:58 2015] Giving source the simple spatial ID 6 for pass 0, mean size = 0.67"
[Mon May 11 21:43:58 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass0_src6.ximg exists
[Mon May 11 21:43:58 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15077_pi14-548_cl_pass0_src6.csv
[Mon May 11 21:43:58 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass0_src6_1.ximg exists
[Mon May 11 21:43:58 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15077_pi14-548_cl_pass0_src6.csv
[Mon May 11 21:43:58 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf15077_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf15077_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 11 21:43:58 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Mon May 11 21:43:58 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Mon May 11 21:43:58 2015] Fit fullrun_ccd6_acisf15077_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Mon May 11 21:44:06 2015] Spatial fit model total counts = 22.685600, observed total counts = 25.000000
[Mon May 11 21:44:06 2015] Offset between fit and detection position for source 12 = 0.710613 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.710613 pixels
  Position = (224.3, 467.4) = 11 28 5.79 58 33 14.4
  Extent = 1.3 (0.9-1.5)" x 0.7 (0.5-1.1)", rotation angle = 207 (173-229) degrees
  Source counts = 22.7 +/- 4.8
  Background counts = 0.0
  Rate = 0.0004 +/- 9e-05
[Mon May 11 21:44:06 2015] Vigneting correction estimate = 1.000000
[Mon May 11 21:44:06 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 11 21:44:06 2015] Assessing source extent using major axis lower bound
[Mon May 11 21:44:06 2015] Source does appear to be extended
[Mon May 11 21:44:06 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.90
[Mon May 11 21:44:25 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 11 21:44:25 2015] Initial guess for spatial extent in simple fitting = 0.99"
[Mon May 11 21:44:25 2015] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.983
[Mon May 11 21:44:25 2015] Giving source the simple spatial ID 6 for pass 1, mean size = 0.99"
[Mon May 11 21:44:26 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass1_src6.ximg exists
[Mon May 11 21:44:26 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15077_pi14-548_cl_pass1_src6.csv
[Mon May 11 21:44:26 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass1_src6_1.ximg exists
[Mon May 11 21:44:26 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15077_pi14-548_cl_pass1_src6.csv
[Mon May 11 21:44:26 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf15077_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf15077_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 11 21:44:26 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Mon May 11 21:44:26 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Mon May 11 21:44:26 2015] Fit fullrun_ccd6_acisf15077_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Mon May 11 21:44:32 2015] Spatial fit model total counts = 21.909900, observed total counts = 25.000000
[Mon May 11 21:44:32 2015] Offset between fit and detection position for source 12 = 0.058976 pixels
[Mon May 11 21:44:32 2015] 21.944545 total counts/ 0.476845 bgd. counts: snr = 31.088295
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.058976 pixels
  Position = (224.2, 467.4) = 11 28 5.79 58 33 14.4
  Extent = 1.3 (0.9-1.8)" x 0.7 (0.4-1.1)", rotation angle = 21 (358-48) degrees
  Source counts = 21.5 +/- 4.7
  Background counts = 0.5
  Rate = 0.0004 +/- 9e-05
[Mon May 11 21:44:32 2015] Vigneting correction estimate = 1.000000
[Mon May 11 21:44:32 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 11 21:44:32 2015] Assessing source extent using major axis lower bound
[Mon May 11 21:44:32 2015] Source does appear to be extended
[Mon May 11 21:44:32 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.88
[Mon May 11 21:50:52 2015] Writing source region out to fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src12_src.reg
[Mon May 11 21:50:52 2015] Extracting stamp from image fullrun_ccd6_acisf15077_pi14-548_cl_sm2.00.img.gz, (166, 409) - (282, 525)
[Mon May 11 21:50:52 2015] Writing fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src12.gif
[Mon May 11 21:55:02 2015] Size of ../../acisf15077/products/events/fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src12_src.evt.gz[events] = 24 counts
[Mon May 11 21:55:02 2015] Mean chipx,y = (818.88, 451.00)
[Mon May 11 21:55:02 2015] Mean tdetx,y = (3693.88, 2153.00)
[Mon May 11 21:55:02 2015] chipx,y range = (801.00-836.00, 432.00-471.00)
[Mon May 11 21:55:02 2015] Size of ../../acisf15077/products/events/fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 48 counts
[Mon May 11 21:55:03 2015] Not generating rmf since there are only 21 counts
[Mon May 11 21:55:03 2015] arf not found, will run specextract
[Mon May 11 21:55:40 2015] ../../acisf15077/products/spectra/fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src12.warf not found
[Mon May 11 21:55:40 2015] ../../acisf15077/products/spectra/fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src12.wrmf not found
[Mon May 11 21:55:40 2015] Removal of ../../acisf15077/products/spectra/fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src12.soff failed
[Mon May 11 22:09:08 2015] Spectrum 12 has only 21 counts, deleting rmf
[Mon May 11 22:09:08 2015] 194.647
[Mon May 11 22:20:00 2015] Updating aperture counts using extracted products
[Mon May 11 22:20:00 2015] Total counts from fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src12_src.pi.gz = 24.00
[Mon May 11 22:20:00 2015] Total counts from fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src12_bgd.pi.gz = 48.00
[Mon May 11 22:20:00 2015] Got source and background scale factors 0.000003, 0.000059
[Mon May 11 22:20:00 2015] User source parameters:
  Position = (224.2, 467.4) = 11 28 5.79 58 33 14.4
  Extent = 1.3 (0.9-1.8)" x 0.7 (0.4-1.1)", rotation angle = 21 (358-48) degrees
  Source aperture counts = 21.8 +/- 6.0
  Background aperture counts = 2.2
  Rate = 0.0004 +/- 0.0001

[Mon May 11 22:20:03 2015] Calculating source flux in energy range 0.30-8.00
[Mon May 11 22:20:03 2015] Using photon index=1.80, rate=0.000414, arf fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src12.arf
[Mon May 11 22:20:03 2015] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 11 22:20:03 2015] Updating source flux to 5.2e-15
[Mon May 11 22:20:12 2015] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 11 22:20:13 2015] acisf15077/analysis//spectral/fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete