[Mon May 11 21:43:10 2015] Detection parameters:
  Position = (101.1, 410.4) = 11 28 13.51 58 32 46.5
  Extent = 0.9" x 0.5", rotation angle = 49 degrees
  Source counts = 12.5 +/- 3.7
  Background counts = 1.5
  Rate = 0.0002 +/- 7e-05

[Mon May 11 21:43:11 2015] Off-axis axis estimate = 2.51'
[Mon May 11 21:43:58 2015] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Mon May 11 21:43:58 2015] Initial guess for spatial extent in simple fitting = 0.49"
[Mon May 11 21:43:58 2015] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.993
[Mon May 11 21:43:58 2015] Giving source the simple spatial ID 13 for pass 0, mean size = 0.49"
[Mon May 11 21:43:58 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass0_src13.ximg exists
[Mon May 11 21:43:58 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass0_src13_1.ximg exists
[Mon May 11 21:43:58 2015] Fit fullrun_ccd6_acisf15077_pi14-548_cl_pass0_src13 appears to have run properly
[Mon May 11 21:43:58 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Mon May 11 21:43:58 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Mon May 11 21:43:58 2015] Fit fullrun_ccd6_acisf15077_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Mon May 11 21:44:06 2015] Spatial fit model total counts = 15.027200, observed total counts = 16.000000
[Mon May 11 21:44:06 2015] Offset between fit and detection position for source 10 = 1.133293 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.133293 pixels
  Position = (102.0, 411.1) = 11 28 13.48 58 32 46.7
  Extent = 1.0 (0.6-1.2)", rotation angle = 0
  Source counts = 14.4 +/- 3.8
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Mon May 11 21:44:06 2015] Vigneting correction estimate = 1.000000
[Mon May 11 21:44:06 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 11 21:44:06 2015] Assessing source extent using major axis lower bound
[Mon May 11 21:44:06 2015] Source does appear to be extended
[Mon May 11 21:44:06 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 11 21:44:25 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 11 21:44:25 2015] Initial guess for spatial extent in simple fitting = 0.95"
[Mon May 11 21:44:25 2015] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.844
[Mon May 11 21:44:25 2015] Giving source the simple spatial ID 13 for pass 1, mean size = 0.95"
[Mon May 11 21:44:26 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass1_src13.ximg exists
[Mon May 11 21:44:26 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15077_pi14-548_cl_pass1_src13.csv
[Mon May 11 21:44:26 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass1_src13_1.ximg exists
[Mon May 11 21:44:26 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15077_pi14-548_cl_pass1_src13.csv
[Mon May 11 21:44:26 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf15077_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf15077_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 11 21:44:26 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Mon May 11 21:44:26 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15077_pi14-548_cl_pass1_tfrozen_src13.csv
[Mon May 11 21:44:26 2015] fullrun_ccd6_acisf15077_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Mon May 11 21:44:26 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15077_pi14-548_cl_pass1_tfrozen_src13.csv
[Mon May 11 21:44:26 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf15077_pi14-548_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf15077_pi14-548_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 11 21:44:32 2015] Spatial fit model total counts = 14.042900, observed total counts = 16.000000
[Mon May 11 21:44:32 2015] Offset between fit and detection position for source 10 = 0.195630 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.195630 pixels
  Position = (102.0, 411.3) = 11 28 13.48 58 32 46.8
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 13.1 +/- 3.6
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Mon May 11 21:44:32 2015] Vigneting correction estimate = 1.000000
[Mon May 11 21:44:32 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 11 21:44:32 2015] Assessing source extent using major axis lower bound
[Mon May 11 21:44:32 2015] Source does appear to be extended
[Mon May 11 21:44:32 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 11 21:50:53 2015] Writing source region out to fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src10_src.reg
[Mon May 11 21:50:53 2015] Extracting stamp from image fullrun_ccd6_acisf15077_pi14-548_cl_sm2.00.img.gz, (61, 370) - (143, 453)
[Mon May 11 21:50:53 2015] Writing fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src10.gif
[Mon May 11 22:00:48 2015] Size of ../../acisf15077/products/events/fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src10_src.evt.gz[events] = 14 counts
[Mon May 11 22:00:48 2015] Mean chipx,y = (937.57, 392.57)
[Mon May 11 22:00:48 2015] Mean tdetx,y = (3812.57, 2094.57)
[Mon May 11 22:00:48 2015] chipx,y range = (921.00-957.00, 379.00-408.00)
[Mon May 11 22:00:48 2015] Size of ../../acisf15077/products/events/fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 34 counts
[Mon May 11 22:00:50 2015] Not generating rmf since there are only 13 counts
[Mon May 11 22:00:50 2015] arf not found, will run specextract
[Mon May 11 22:01:31 2015] ../../acisf15077/products/spectra/fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src10.warf not found
[Mon May 11 22:01:31 2015] ../../acisf15077/products/spectra/fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src10.wrmf not found
[Mon May 11 22:01:31 2015] Removal of ../../acisf15077/products/spectra/fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src10.soff failed
[Mon May 11 22:09:08 2015] Spectrum 10 has only 13 counts, deleting rmf
[Mon May 11 22:09:08 2015] 199.669
[Mon May 11 22:20:01 2015] Updating aperture counts using extracted products
[Mon May 11 22:20:01 2015] Total counts from fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src10_src.pi.gz = 14.00
[Mon May 11 22:20:01 2015] Total counts from fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src10_bgd.pi.gz = 34.00
[Mon May 11 22:20:01 2015] Got source and background scale factors 0.000003, 0.000030
[Mon May 11 22:20:01 2015] User source parameters:
  Position = (102.0, 411.3) = 11 28 13.48 58 32 46.8
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source aperture counts = 11.1 +/- 4.8
  Background aperture counts = 2.9
  Rate = 0.0002 +/- 9e-05

[Mon May 11 22:20:03 2015] Calculating source flux in energy range 0.30-8.00
[Mon May 11 22:20:03 2015] Using photon index=1.80, rate=0.000252, arf fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src10.arf
[Mon May 11 22:20:03 2015] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 11 22:20:03 2015] Updating source flux to 3.1e-15
[Mon May 11 22:20:12 2015] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 11 22:20:13 2015] acisf15077/analysis//spectral/fullrun_ccd6_acisf15077_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete