[Sun Jun  2 11:11:15 2013] Detection parameters:
  Position = (423.6, 1216.7) = 0 43 2.41 -23 34 26.1
  Extent = 0.5" x 0.5", rotation angle = 71 degrees
  Source counts = 10.8 +/- 3.3
  Background counts = 0.2
  Rate = 0.0007 +/- 0.0002

[Sun Jun  2 11:11:15 2013] Off-axis axis estimate = 3.58'
[Sun Jun  2 11:45:37 2013] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 11:45:37 2013] Initial guess for spatial extent in simple fitting = 0.71"
[Sun Jun  2 11:45:37 2013] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.052
[Sun Jun  2 11:45:37 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 0.71"
[Sun Jun  2 11:54:05 2013] fullrun_ccd6_acisf15066_pi14-548_cl_pass0_src6.ximg exists
[Sun Jun  2 11:54:05 2013] fullrun_ccd6_acisf15066_pi14-548_cl_pass0_src6_1.ximg exists
[Sun Jun  2 11:54:05 2013] Fit fullrun_ccd6_acisf15066_pi14-548_cl_pass0_src6 appears to have run properly
[Sun Jun  2 11:54:05 2013] fullrun_ccd6_acisf15066_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sun Jun  2 11:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15066_pi14-548_cl_pass0_tfrozen_src6.csv
[Sun Jun  2 11:54:05 2013] fullrun_ccd6_acisf15066_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jun  2 11:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15066_pi14-548_cl_pass0_tfrozen_src6.csv
[Sun Jun  2 11:54:05 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf15066_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf15066_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 12:03:54 2013] Spatial fit model total counts = 11.250300, observed total counts = 14.000000
[Sun Jun  2 12:03:54 2013] Offset between fit and detection position for source 4 = 0.759622 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.759622 pixels
  Position = (424.1, 1217.3) = 0 43 2.41 -23 34 26.0
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 10.8 +/- 3.3
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Sun Jun  2 12:03:54 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 12:03:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 12:03:54 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 12:03:54 2013] Source does appear to be extended
[Sun Jun  2 12:03:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 12:24:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  2 12:24:14 2013] Initial guess for spatial extent in simple fitting = 0.59"
[Sun Jun  2 12:24:14 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.047
[Sun Jun  2 12:24:14 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 0.59"
[Sun Jun  2 12:32:48 2013] fullrun_ccd6_acisf15066_pi14-548_cl_pass1_src6.ximg exists
[Sun Jun  2 12:32:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15066_pi14-548_cl_pass1_src6.csv
[Sun Jun  2 12:32:48 2013] fullrun_ccd6_acisf15066_pi14-548_cl_pass1_src6_1.ximg exists
[Sun Jun  2 12:32:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15066_pi14-548_cl_pass1_src6.csv
[Sun Jun  2 12:32:48 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf15066_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf15066_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 12:32:48 2013] fullrun_ccd6_acisf15066_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sun Jun  2 12:32:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15066_pi14-548_cl_pass1_tfrozen_src6.csv
[Sun Jun  2 12:32:48 2013] fullrun_ccd6_acisf15066_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jun  2 12:32:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15066_pi14-548_cl_pass1_tfrozen_src6.csv
[Sun Jun  2 12:32:48 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf15066_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf15066_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 12:42:39 2013] Spatial fit model total counts = 11.588200, observed total counts = 14.000000
[Sun Jun  2 12:42:39 2013] Offset between fit and detection position for source 4 = 0.004938 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.004938 pixels
  Position = (424.1, 1217.3) = 0 43 2.41 -23 34 26.0
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 10.9 +/- 3.3
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Sun Jun  2 12:42:39 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 12:42:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 12:42:39 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 12:42:39 2013] Source does appear to be extended
[Sun Jun  2 12:42:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 12:45:34 2013] Writing source region out to fullrun_ccd6_acisf15066_pi14-548_pass1_cl_src4_src.reg
[Sun Jun  2 12:45:34 2013] Extracting stamp from image fullrun_ccd6_acisf15066_pi14-548_cl_sm2.00.img.gz, (397, 1190) - (451, 1245)
[Sun Jun  2 12:45:34 2013] Writing fullrun_ccd6_acisf15066_pi14-548_pass1_cl_src4.gif
[Sun Jun  2 12:48:33 2013] Size of ../../acisf15066/products/events/fullrun_ccd6_acisf15066_pi14-548_pass1_cl_src4_src.evt.gz[events] = 11 counts
[Sun Jun  2 12:48:33 2013] Mean chipx,y = (986.09, 127.91)
[Sun Jun  2 12:48:33 2013] Mean tdetx,y = (3861.09, 1829.91)
[Sun Jun  2 12:48:33 2013] chipx,y range = (966.00-999.00, 112.00-144.00)
[Sun Jun  2 12:48:33 2013] Size of ../../acisf15066/products/events/fullrun_ccd6_acisf15066_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 2 counts
[Sun Jun  2 12:48:34 2013] Not generating rmf since there are only 10 counts
[Sun Jun  2 12:48:34 2013] arf not found, will run specextract
[Sun Jun  2 12:48:50 2013] ../../acisf15066/products/spectra/fullrun_ccd6_acisf15066_pi14-548_pass1_cl_src4.warf not found
[Sun Jun  2 12:48:50 2013] ../../acisf15066/products/spectra/fullrun_ccd6_acisf15066_pi14-548_pass1_cl_src4.wrmf not found
[Sun Jun  2 12:48:50 2013] Removal of ../../acisf15066/products/spectra/fullrun_ccd6_acisf15066_pi14-548_pass1_cl_src4.soff failed
[Sun Jun  2 12:51:14 2013] Spectrum 4 has only 11 counts, deleting rmf
[Sun Jun  2 12:51:14 2013] 198.701
[Sun Jun  2 12:54:28 2013] Updating aperture counts using extracted products
[Sun Jun  2 12:54:28 2013] Total counts from fullrun_ccd6_acisf15066_pi14-548_pass1_cl_src4_src.pi.gz = 11.00
[Sun Jun  2 12:54:28 2013] Total counts from fullrun_ccd6_acisf15066_pi14-548_pass1_cl_src4_bgd.pi.gz = 2.00
[Sun Jun  2 12:54:28 2013] Got source and background scale factors 0.000001, 0.000013
[Sun Jun  2 12:54:28 2013] User source parameters:
  Position = (424.1, 1217.3) = 0 43 2.41 -23 34 26.0
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source aperture counts = 10.8 +/- 4.4
  Background aperture counts = 0.2
  Rate = 0.0007 +/- 0.0003

[Sun Jun  2 12:54:29 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 12:54:29 2013] Using photon index=1.80, rate=0.000738, arf fullrun_ccd6_acisf15066_pi14-548_pass1_cl_src4.arf
[Sun Jun  2 12:54:29 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Jun  2 12:54:29 2013] Updating source flux to 8.6e-15
[Sun Jun  2 12:54:35 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  2 12:54:36 2013] acisf15066/analysis//spectral/fullrun_ccd6_acisf15066_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete