[Sun Jun  9 13:22:49 2013] Detection parameters:
  Position = (961.6, 590.1) = 4 21 30.93 -18 59 8.1
  Extent = 0.9" x 0.7", rotation angle = 56 degrees
  Source counts = 32.8 +/- 6.5
  Background counts = 9.2
  Rate = 0.002 +/- 0.0004

[Sun Jun  9 13:22:49 2013] Off-axis axis estimate = 10.80'
[Sun Jun  9 13:25:46 2013] Using EEF radius (= 5.18 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 13:25:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 13:25:46 2013] Initial guess for spatial extent in simple fitting = 5.18"
[Sun Jun  9 13:25:46 2013] source mask rpix=10.5, npix_max = 486, mask sum = 403, frac = 0.828
[Sun Jun  9 13:25:46 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 5.18"
[Sun Jun  9 13:50:58 2013] fullrun_ccd2_acisf15060_pi14-548_cl_pass0_src1.ximg exists
[Sun Jun  9 13:50:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15060_pi14-548_cl_pass0_src1.csv
[Sun Jun  9 13:50:58 2013] fullrun_ccd2_acisf15060_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Jun  9 13:50:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15060_pi14-548_cl_pass0_src1.csv
[Sun Jun  9 13:50:58 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15060_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15060_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 13:50:58 2013] fullrun_ccd2_acisf15060_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  9 13:50:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15060_pi14-548_cl_pass0_tfrozen_src1.csv
[Sun Jun  9 13:50:58 2013] fullrun_ccd2_acisf15060_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  9 13:50:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15060_pi14-548_cl_pass0_tfrozen_src1.csv
[Sun Jun  9 13:50:58 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15060_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15060_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 14:30:09 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 59.221607 pixels away
[Sun Jun  9 14:30:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 14:30:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 14:30:09 2013] Assessing source extent using major
[Sun Jun  9 14:30:09 2013] Source does appear to be extended
[Sun Jun  9 14:30:09 2013] Computing asymmetry using major and minor axis, asym = 1.35
[Sun Jun  9 14:30:24 2013] Using EEF radius (= 5.18 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 14:30:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 14:30:24 2013] Initial guess for spatial extent in simple fitting = 5.18"
[Sun Jun  9 14:30:24 2013] source mask rpix=10.5, npix_max = 486, mask sum = 403, frac = 0.828
[Sun Jun  9 14:30:24 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.18"
[Sun Jun  9 14:53:59 2013] fullrun_ccd2_acisf15060_pi14-548_cl_pass1_src1.ximg exists
[Sun Jun  9 14:53:59 2013] fullrun_ccd2_acisf15060_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Jun  9 14:53:59 2013] Fit fullrun_ccd2_acisf15060_pi14-548_cl_pass1_src1 appears to have run properly
[Sun Jun  9 14:53:59 2013] fullrun_ccd2_acisf15060_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  9 14:53:59 2013] fullrun_ccd2_acisf15060_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  9 14:53:59 2013] Fit fullrun_ccd2_acisf15060_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun  9 15:16:57 2013] Spatial fit model total counts = 90.531100, observed total counts = 94.000000
[Sun Jun  9 15:16:57 2013] Offset between fit and detection position for source 1 = 2.997281 pixels
[Sun Jun  9 15:16:57 2013] 90.556900 total counts/ 20.252300 bgd. counts: snr = 15.622357
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.997281 pixels
  Position = (960.2, 587.5) = 4 21 30.99 -18 59 9.7
  Extent = 6.0 (4.7-7.5)" x 3.5 (2.8-4.5)", rotation angle = 294 (273-312) degrees
  Source counts = 70.3 +/- 9.5
  Background counts = 20.3
  Rate = 0.005 +/- 0.0006
[Sun Jun  9 15:16:57 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 15:16:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 15:16:57 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 15:16:57 2013] Source does appear to be extended
[Sun Jun  9 15:16:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04
[Sun Jun  9 15:17:13 2013] Writing source region out to fullrun_ccd2_acisf15060_pi14-548_pass1_cl_src1_src.reg
[Sun Jun  9 15:17:13 2013] Extracting stamp from image fullrun_ccd2_acisf15060_pi14-548_cl_sm2.00.img.gz, (686, 313) - (1143, 862)
[Sun Jun  9 15:17:13 2013] Writing fullrun_ccd2_acisf15060_pi14-548_pass1_cl_src1.gif
[Sun Jun  9 15:17:14 2013] Size of ../../acisf15060/products/events/fullrun_ccd2_acisf15060_pi14-548_pass1_cl_src1_src.evt.gz[events] = 84 counts
[Sun Jun  9 15:17:14 2013] Mean chipx,y = (575.36, 897.52)
[Sun Jun  9 15:17:14 2013] Mean tdetx,y = (3958.52, 3510.64)
[Sun Jun  9 15:17:14 2013] chipx,y range = (536.00-619.00, 853.00-940.00)
[Sun Jun  9 15:17:14 2013] Size of ../../acisf15060/products/events/fullrun_ccd2_acisf15060_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 195 counts
[Sun Jun  9 15:17:16 2013] Not generating rmf since there are only 70 counts
[Sun Jun  9 15:17:16 2013] arf not found, will run specextract
[Sun Jun  9 15:17:54 2013] ../../acisf15060/products/spectra/fullrun_ccd2_acisf15060_pi14-548_pass1_cl_src1.warf not found
[Sun Jun  9 15:17:54 2013] ../../acisf15060/products/spectra/fullrun_ccd2_acisf15060_pi14-548_pass1_cl_src1.wrmf not found
[Sun Jun  9 15:17:54 2013] Removal of ../../acisf15060/products/spectra/fullrun_ccd2_acisf15060_pi14-548_pass1_cl_src1.soff failed
[Sun Jun  9 15:20:35 2013] Spectrum 1 has only 70 counts, deleting rmf
[Sun Jun  9 15:20:35 2013] 119.089
[Sun Jun  9 15:33:00 2013] Updating aperture counts using extracted products
[Sun Jun  9 15:33:00 2013] Total counts from fullrun_ccd2_acisf15060_pi14-548_pass1_cl_src1_src.pi.gz = 84.00
[Sun Jun  9 15:33:00 2013] Total counts from fullrun_ccd2_acisf15060_pi14-548_pass1_cl_src1_bgd.pi.gz = 195.00
[Sun Jun  9 15:33:00 2013] Got source and background scale factors 0.000066, 0.001314
[Sun Jun  9 15:33:00 2013] User source parameters:
  Position = (960.2, 587.5) = 4 21 30.99 -18 59 9.7
  Extent = 6.0 (4.7-7.5)" x 3.5 (2.8-4.5)", rotation angle = 294 (273-312) degrees
  Source aperture counts = 74.3 +/- 10.2
  Background aperture counts = 9.7
  Rate = 0.005 +/- 0.0007

[Sun Jun  9 15:33:01 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 15:33:01 2013] Using photon index=1.80, rate=0.00476, arf fullrun_ccd2_acisf15060_pi14-548_pass1_cl_src1.arf
[Sun Jun  9 15:33:01 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Jun  9 15:33:01 2013] Updating source flux to 8.8e-14
[Sun Jun  9 15:33:08 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 15:33:09 2013] acisf15060/analysis//spectral/fullrun_ccd2_acisf15060_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete