[Wed May  8 06:00:26 2013] Detection parameters:
  Position = (212.0, 976.3) = 16 19 21.36 -7 53 52.1
  Extent = 0.6" x 0.5", rotation angle = 5 degrees
  Source counts = 10.6 +/- 3.3
  Background counts = 0.4
  Rate = 0.0007 +/- 0.0002

[Wed May  8 06:00:27 2013] Off-axis axis estimate = 2.85'
[Wed May  8 06:27:04 2013] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Wed May  8 06:27:04 2013] Initial guess for spatial extent in simple fitting = 0.55"
[Wed May  8 06:27:04 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.141
[Wed May  8 06:27:04 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 0.55"
[Wed May  8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src9.ximg exists
[Wed May  8 06:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src9.csv
[Wed May  8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src9_1.ximg exists
[Wed May  8 06:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src9.csv
[Wed May  8 06:38:42 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Wed May  8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Wed May  8 06:38:42 2013] Fit fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Wed May  8 06:38:46 2013] Spatial fit model total counts = 10.748500, observed total counts = 12.000000
[Wed May  8 06:38:46 2013] Offset between fit and detection position for source 5 = 0.712837 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.712837 pixels
  Position = (212.6, 976.8) = 16 19 21.36 -7 53 52.1
  Extent = 0.8 (0.6-1.3)" x 0.4 (0.3-0.6)", rotation angle = 357 (327-20) degrees
  Source counts = 10.8 +/- 3.3
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Wed May  8 06:38:46 2013] Vigneting correction estimate = 1.000000
[Wed May  8 06:38:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 06:38:46 2013] Assessing source extent using major axis lower bound
[Wed May  8 06:38:46 2013] Source does appear to be extended
[Wed May  8 06:38:46 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89
[Wed May  8 07:01:52 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 07:01:52 2013] Initial guess for spatial extent in simple fitting = 0.63"
[Wed May  8 07:01:52 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.949
[Wed May  8 07:01:52 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 0.63"
[Wed May  8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src9.ximg exists
[Wed May  8 07:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src9.csv
[Wed May  8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src9_1.ximg exists
[Wed May  8 07:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src9.csv
[Wed May  8 07:12:39 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Wed May  8 07:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src9.csv
[Wed May  8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May  8 07:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src9.csv
[Wed May  8 07:12:39 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 07:12:43 2013] Spatial fit model total counts = 10.339000, observed total counts = 12.000000
[Wed May  8 07:12:43 2013] Offset between fit and detection position for source 5 = 0.024379 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.024379 pixels
  Position = (212.5, 976.8) = 16 19 21.36 -7 53 52.1
  Extent = 0.8 (0.6-1.3)" x 0.4 (0.3-0.6)", rotation angle = 356 (320-20) degrees
  Source counts = 10.4 +/- 3.2
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Wed May  8 07:12:43 2013] Vigneting correction estimate = 1.000000
[Wed May  8 07:12:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 07:12:43 2013] Assessing source extent using major axis lower bound
[Wed May  8 07:12:43 2013] Source does appear to be extended
[Wed May  8 07:12:43 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.91
[Wed May  8 07:19:04 2013] Writing source region out to fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src5_src.reg
[Wed May  8 07:19:04 2013] Extracting stamp from image fullrun_ccd7_acisf15057_pi14-548_cl_sm2.00.img.gz, (174, 938) - (251, 1016)
[Wed May  8 07:19:04 2013] Writing fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src5.gif
[Wed May  8 07:21:29 2013] Size of ../../acisf15057/products/events/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src5_src.evt.gz[events] = 11 counts
[Wed May  8 07:21:29 2013] Mean chipx,y = (63.09, 815.55)
[Wed May  8 07:21:29 2013] Mean tdetx,y = (3980.09, 2517.55)
[Wed May  8 07:21:29 2013] chipx,y range = (47.00-77.00, 799.00-830.00)
[Wed May  8 07:21:29 2013] Size of ../../acisf15057/products/events/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 3 counts
[Wed May  8 07:21:31 2013] Not generating rmf since there are only 10 counts
[Wed May  8 07:21:31 2013] arf not found, will run specextract
[Wed May  8 07:21:39 2013] ../../acisf15057/products/spectra/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src5.warf not found
[Wed May  8 07:21:39 2013] ../../acisf15057/products/spectra/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src5.wrmf not found
[Wed May  8 07:21:39 2013] Removal of ../../acisf15057/products/spectra/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src5.soff failed
[Wed May  8 07:22:58 2013] Spectrum 5 has only 10 counts, deleting rmf
[Wed May  8 07:22:58 2013] 217.61
[Wed May  8 07:23:02 2013] Updating aperture counts using extracted products
[Wed May  8 07:23:02 2013] Total counts from fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src5_src.pi.gz = 11.00
[Wed May  8 07:23:02 2013] Total counts from fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src5_bgd.pi.gz = 3.00
[Wed May  8 07:23:02 2013] Got source and background scale factors 0.000001, 0.000026
[Wed May  8 07:23:02 2013] User source parameters:
  Position = (212.5, 976.8) = 16 19 21.36 -7 53 52.1
  Extent = 0.8 (0.6-1.3)" x 0.4 (0.3-0.6)", rotation angle = 356 (320-20) degrees
  Source aperture counts = 10.9 +/- 4.4
  Background aperture counts = 0.1
  Rate = 0.0007 +/- 0.0003

[Wed May  8 07:23:02 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 07:23:02 2013] Using photon index=1.80, rate=0.000703, arf fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src5.arf
[Wed May  8 07:23:02 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  8 07:23:02 2013] Updating source flux to 5.8e-15
[Wed May  8 07:23:08 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting