[Wed May 8 06:00:26 2013] Detection parameters: Position = (511.4, 952.9) = 16 19 11.44 -7 54 3.6 Extent = 0.5" x 0.5", rotation angle = 119 degrees Source counts = 11.4 +/- 3.5 Background counts = 0.6 Rate = 0.0008 +/- 0.0002 [Wed May 8 06:00:27 2013] Off-axis axis estimate = 0.47' [Wed May 8 06:27:04 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting [Wed May 8 06:27:04 2013] Initial guess for spatial extent in simple fitting = 0.39" [Wed May 8 06:27:04 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.887 [Wed May 8 06:27:04 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 0.39" [Wed May 8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src8.ximg exists [Wed May 8 06:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src8.csv [Wed May 8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src8_1.ximg exists [Wed May 8 06:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src8.csv [Wed May 8 06:38:42 2013] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src8.ximg exists [Wed May 8 06:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src8.csv [Wed May 8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists [Wed May 8 06:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src8.csv [Wed May 8 06:38:42 2013] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 06:38:46 2013] Spatial fit model total counts = 20.880200, observed total counts = 32.000000 [Wed May 8 06:38:46 2013] Poor agreement between spatial fit and data for source 4 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 8 06:38:46 2013] Vigneting correction estimate = 1.000000 [Wed May 8 06:38:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 06:38:46 2013] Assessing source extent using major [Wed May 8 06:38:46 2013] Source does appear to be extended [Wed May 8 06:38:46 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 07:01:52 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting [Wed May 8 07:01:52 2013] Initial guess for spatial extent in simple fitting = 0.39" [Wed May 8 07:01:52 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.887 [Wed May 8 07:01:52 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 0.39" [Wed May 8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src8.ximg exists [Wed May 8 07:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src8.csv [Wed May 8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src8_1.ximg exists [Wed May 8 07:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src8.csv [Wed May 8 07:12:39 2013] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src8_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src8.ximg exists [Wed May 8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists [Wed May 8 07:12:39 2013] Fit fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly [Wed May 8 07:12:43 2013] Spatial fit model total counts = 31.334900, observed total counts = 32.000000 [Wed May 8 07:12:43 2013] Offset between fit and detection position for source 4 = 0.720015 pixels [Wed May 8 07:12:43 2013] 18.885850 total counts/ 7.727550 bgd. counts: snr = 4.013998 Spatial fit parameters: Offset between fit and detection position for source 4 = 0.720015 pixels Position = (511.9, 953.4) = 16 19 11.44 -7 54 3.6 Extent = 0.4 (0.3-0.6)", rotation angle = 0 Source counts = 11.2 +/- 4.3 Background counts = 7.7 Rate = 0.0008 +/- 0.0003 [Wed May 8 07:12:43 2013] Vigneting correction estimate = 1.000000 [Wed May 8 07:12:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 07:12:43 2013] Assessing source extent using major axis lower bound [Wed May 8 07:12:43 2013] Source does appear to be extended [Wed May 8 07:12:43 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 07:19:04 2013] Writing source region out to fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src4_src.reg [Wed May 8 07:19:04 2013] Extracting stamp from image fullrun_ccd7_acisf15057_pi14-548_cl_sm2.00.img.gz, (495, 936) - (529, 971) [Wed May 8 07:19:04 2013] Writing fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src4.gif [Wed May 8 07:21:12 2013] Size of ../../acisf15057/products/events/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src4_src.evt.gz[events] = 12 counts [Wed May 8 07:21:12 2013] Mean chipx,y = (182.08, 540.25) [Wed May 8 07:21:12 2013] Mean tdetx,y = (4099.08, 2242.25) [Wed May 8 07:21:12 2013] chipx,y range = (165.00-199.00, 524.00-555.00) [Wed May 8 07:21:12 2013] Size of ../../acisf15057/products/events/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 4 counts [Wed May 8 07:21:13 2013] Not generating rmf since there are only 11 counts [Wed May 8 07:21:13 2013] arf not found, will run specextract [Wed May 8 07:21:21 2013] ../../acisf15057/products/spectra/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src4.warf not found [Wed May 8 07:21:21 2013] ../../acisf15057/products/spectra/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src4.wrmf not found [Wed May 8 07:21:21 2013] Removal of ../../acisf15057/products/spectra/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src4.soff failed [Wed May 8 07:22:58 2013] Spectrum 4 has only 11 counts, deleting rmf [Wed May 8 07:22:58 2013] 233.131 [Wed May 8 07:23:02 2013] Updating aperture counts using extracted products [Wed May 8 07:23:02 2013] Total counts from fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src4_src.pi.gz = 12.00 [Wed May 8 07:23:02 2013] Total counts from fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src4_bgd.pi.gz = 4.00 [Wed May 8 07:23:02 2013] Got source and background scale factors 0.000000, 0.000004 [Wed May 8 07:23:02 2013] User source parameters: Position = (511.9, 953.4) = 16 19 11.44 -7 54 3.6 Extent = 0.4 (0.3-0.6)", rotation angle = 0 Source aperture counts = 11.6 +/- 4.6 Background aperture counts = 0.4 Rate = 0.0008 +/- 0.0003 [Wed May 8 07:23:02 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 07:23:02 2013] Using photon index=1.80, rate=0.000755, arf fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src4.arf [Wed May 8 07:23:02 2013] Assuming count rate is from the 0.20-8.00 bandpass [Wed May 8 07:23:02 2013] Updating source flux to 5.9e-15 [Wed May 8 07:23:08 2013] Flag p found in src. 4 procflags, skipping spectral fitting [Wed May 8 07:23:08 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting