[Wed May  8 06:00:26 2013] Detection parameters:
  Position = (947.9, 836.7) = 16 18 56.99 -7 55 0.8
  Extent = 0.8" x 0.6", rotation angle = 79 degrees
  Source counts = 17.0 +/- 4.2
  Background counts = 1.0
  Rate = 0.001 +/- 0.0003

[Wed May  8 06:00:27 2013] Off-axis axis estimate = 3.40'
[Wed May  8 06:27:04 2013] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Wed May  8 06:27:04 2013] Initial guess for spatial extent in simple fitting = 0.67"
[Wed May  8 06:27:04 2013] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.158
[Wed May  8 06:27:04 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 0.67"
[Wed May  8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src6.ximg exists
[Wed May  8 06:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src6.csv
[Wed May  8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src6_1.ximg exists
[Wed May  8 06:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src6.csv
[Wed May  8 06:38:42 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed May  8 06:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src6.csv
[Wed May  8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed May  8 06:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src6.csv
[Wed May  8 06:38:42 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 06:38:46 2013] Spatial fit model total counts = 16.731900, observed total counts = 19.000000
[Wed May  8 06:38:46 2013] Offset between fit and detection position for source 2 = 0.777189 pixels
[Wed May  8 06:38:46 2013] 17.255600 total counts/ 0.000000 bgd. counts: snr = 2154401571026381.000000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.777189 pixels
  Position = (948.2, 837.4) = 16 18 57.00 -7 55 0.7
  Extent = 0.8 (0.5-1.0)", rotation angle = 0
  Source counts = 17.3 +/- 4.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Wed May  8 06:38:46 2013] Vigneting correction estimate = 1.000000
[Wed May  8 06:38:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 06:38:46 2013] Assessing source extent using major axis lower bound
[Wed May  8 06:38:46 2013] Source does appear to be extended
[Wed May  8 06:38:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 07:01:52 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 07:01:52 2013] Initial guess for spatial extent in simple fitting = 0.76"
[Wed May  8 07:01:52 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.949
[Wed May  8 07:01:52 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 0.76"
[Wed May  8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src6.ximg exists
[Wed May  8 07:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src6.csv
[Wed May  8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src6_1.ximg exists
[Wed May  8 07:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src6.csv
[Wed May  8 07:12:39 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed May  8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed May  8 07:12:39 2013] Fit fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Wed May  8 07:12:43 2013] Spatial fit model total counts = 18.000900, observed total counts = 19.000000
[Wed May  8 07:12:43 2013] Offset between fit and detection position for source 2 = 0.130014 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.130014 pixels
  Position = (948.3, 837.5) = 16 18 56.99 -7 55 0.6
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 18.2 +/- 4.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Wed May  8 07:12:43 2013] Vigneting correction estimate = 1.000000
[Wed May  8 07:12:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 07:12:43 2013] Assessing source extent using major axis lower bound
[Wed May  8 07:12:43 2013] Source does appear to be extended
[Wed May  8 07:12:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 07:19:04 2013] Writing source region out to fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src2_src.reg
[Wed May  8 07:19:04 2013] Extracting stamp from image fullrun_ccd7_acisf15057_pi14-548_cl_sm2.00.img.gz, (912, 801) - (985, 874)
[Wed May  8 07:19:04 2013] Writing fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src2.gif
[Wed May  8 07:20:34 2013] Size of ../../acisf15057/products/events/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src2_src.evt.gz[events] = 19 counts
[Wed May  8 07:20:34 2013] Mean chipx,y = (439.84, 165.95)
[Wed May  8 07:20:34 2013] Mean tdetx,y = (4356.84, 1867.95)
[Wed May  8 07:20:34 2013] chipx,y range = (419.00-454.00, 149.00-183.00)
[Wed May  8 07:20:34 2013] Size of ../../acisf15057/products/events/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 15 counts
[Wed May  8 07:20:35 2013] Not generating rmf since there are only 18 counts
[Wed May  8 07:20:35 2013] arf not found, will run specextract
[Wed May  8 07:20:43 2013] ../../acisf15057/products/spectra/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src2.warf not found
[Wed May  8 07:20:43 2013] ../../acisf15057/products/spectra/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src2.wrmf not found
[Wed May  8 07:20:43 2013] Removal of ../../acisf15057/products/spectra/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src2.soff failed
[Wed May  8 07:22:57 2013] Spectrum 2 has only 18 counts, deleting rmf
[Wed May  8 07:22:58 2013] 223.97
[Wed May  8 07:23:01 2013] Updating aperture counts using extracted products
[Wed May  8 07:23:01 2013] Total counts from fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src2_src.pi.gz = 19.00
[Wed May  8 07:23:01 2013] Total counts from fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src2_bgd.pi.gz = 15.00
[Wed May  8 07:23:01 2013] Got source and background scale factors 0.000002, 0.000023
[Wed May  8 07:23:01 2013] User source parameters:
  Position = (948.3, 837.5) = 16 18 56.99 -7 55 0.6
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source aperture counts = 17.7 +/- 5.4
  Background aperture counts = 1.3
  Rate = 0.001 +/- 0.0004

[Wed May  8 07:23:02 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 07:23:02 2013] Using photon index=1.80, rate=0.00123, arf fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src2.arf
[Wed May  8 07:23:02 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  8 07:23:02 2013] Updating source flux to 1e-14
[Wed May  8 07:23:08 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting