[Wed May  8 06:00:26 2013] Detection parameters:
  Position = (426.0, 558.3) = 16 19 14.27 -7 57 17.7
  Extent = 0.6" x 0.5", rotation angle = 35 degrees
  Source counts = 12.5 +/- 3.6
  Background counts = 0.5
  Rate = 0.0008 +/- 0.0002

[Wed May  8 06:00:27 2013] Off-axis axis estimate = 3.66'
[Wed May  8 06:27:04 2013] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Wed May  8 06:27:04 2013] Initial guess for spatial extent in simple fitting = 0.73"
[Wed May  8 06:27:04 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.009
[Wed May  8 06:27:04 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 0.73"
[Wed May  8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src7.ximg exists
[Wed May  8 06:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src7.csv
[Wed May  8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src7_1.ximg exists
[Wed May  8 06:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src7.csv
[Wed May  8 06:38:42 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15057_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Wed May  8 06:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src7.csv
[Wed May  8 06:38:42 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Wed May  8 06:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src7.csv
[Wed May  8 06:38:42 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15057_pi14-548_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 06:38:46 2013] Spatial fit model total counts = 12.320900, observed total counts = 14.000000
[Wed May  8 06:38:46 2013] Offset between fit and detection position for source 1 = 0.703027 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.703027 pixels
  Position = (426.5, 558.8) = 16 19 14.27 -7 57 17.7
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 12.2 +/- 3.5
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Wed May  8 06:38:46 2013] Vigneting correction estimate = 1.000000
[Wed May  8 06:38:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 06:38:46 2013] Assessing source extent using major axis lower bound
[Wed May  8 06:38:46 2013] Source does appear to be extended
[Wed May  8 06:38:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 07:01:52 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 07:01:52 2013] Initial guess for spatial extent in simple fitting = 0.69"
[Wed May  8 07:01:52 2013] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.829
[Wed May  8 07:01:52 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 0.69"
[Wed May  8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src7.ximg exists
[Wed May  8 07:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src7.csv
[Wed May  8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src7_1.ximg exists
[Wed May  8 07:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src7.csv
[Wed May  8 07:12:39 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15057_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Wed May  8 07:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src7.csv
[Wed May  8 07:12:39 2013] fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Wed May  8 07:12:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src7.csv
[Wed May  8 07:12:39 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15057_pi14-548_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 07:12:43 2013] Spatial fit model total counts = 13.589200, observed total counts = 15.000000
[Wed May  8 07:12:43 2013] Offset between fit and detection position for source 1 = 0.042807 pixels
[Wed May  8 07:12:43 2013] 13.679600 total counts/ 0.000000 bgd. counts: snr = 4354635277928679.500000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.042807 pixels
  Position = (426.6, 558.8) = 16 19 14.27 -7 57 17.7
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 13.7 +/- 3.7
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0003
[Wed May  8 07:12:43 2013] Vigneting correction estimate = 1.000000
[Wed May  8 07:12:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 07:12:43 2013] Assessing source extent using major axis lower bound
[Wed May  8 07:12:43 2013] Source does appear to be extended
[Wed May  8 07:12:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 07:19:04 2013] Writing source region out to fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src1_src.reg
[Wed May  8 07:19:04 2013] Extracting stamp from image fullrun_ccd7_acisf15057_pi14-548_cl_sm2.00.img.gz, (395, 527) - (459, 591)
[Wed May  8 07:19:04 2013] Writing fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src1.gif
[Wed May  8 07:20:55 2013] Size of ../../acisf15057/products/events/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src1_src.evt.gz[events] = 13 counts
[Wed May  8 07:20:55 2013] Mean chipx,y = (530.15, 752.15)
[Wed May  8 07:20:55 2013] Mean tdetx,y = (4447.15, 2454.15)
[Wed May  8 07:20:55 2013] chipx,y range = (511.00-543.00, 733.00-768.00)
[Wed May  8 07:20:55 2013] Size of ../../acisf15057/products/events/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 9 counts
[Wed May  8 07:20:56 2013] Not generating rmf since there are only 13 counts
[Wed May  8 07:20:56 2013] arf not found, will run specextract
[Wed May  8 07:21:04 2013] ../../acisf15057/products/spectra/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src1.warf not found
[Wed May  8 07:21:04 2013] ../../acisf15057/products/spectra/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src1.wrmf not found
[Wed May  8 07:21:04 2013] Removal of ../../acisf15057/products/spectra/fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src1.soff failed
[Wed May  8 07:22:58 2013] Spectrum 1 has only 14 counts, deleting rmf
[Wed May  8 07:22:58 2013] 201.839
[Wed May  8 07:23:01 2013] Updating aperture counts using extracted products
[Wed May  8 07:23:01 2013] Total counts from fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src1_src.pi.gz = 13.00
[Wed May  8 07:23:02 2013] Total counts from fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src1_bgd.pi.gz = 9.00
[Wed May  8 07:23:02 2013] Got source and background scale factors 0.000002, 0.000018
[Wed May  8 07:23:02 2013] User source parameters:
  Position = (426.6, 558.8) = 16 19 14.27 -7 57 17.7
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source aperture counts = 12.2 +/- 4.7
  Background aperture counts = 0.8
  Rate = 0.0008 +/- 0.0003

[Wed May  8 07:23:02 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 07:23:02 2013] Using photon index=1.80, rate=0.000926, arf fullrun_ccd7_acisf15057_pi14-548_pass1_cl_src1.arf
[Wed May  8 07:23:02 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  8 07:23:02 2013] Updating source flux to 8.2e-15
[Wed May  8 07:23:08 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting