[Sun May 12 15:23:03 2013] Detection parameters:
  Position = (730.5, 973.8) = 18 13 49.55 -57 39 24.3
  Extent = 0.5" x 0.5", rotation angle = 141 degrees
  Source counts = 11.4 +/- 3.5
  Background counts = 0.6
  Rate = 0.0008 +/- 0.0002

[Sun May 12 15:23:03 2013] Off-axis axis estimate = 4.58'
[Sun May 12 15:47:30 2013] Using EEF radius (= 1.02 ")to estimate initial spatial extent for simple fitting
[Sun May 12 15:47:30 2013] Initial guess for spatial extent in simple fitting = 1.02"
[Sun May 12 15:47:30 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.942
[Sun May 12 15:47:30 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 1.02"
[Sun May 12 16:02:02 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass0_src11.ximg exists
[Sun May 12 16:02:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15056_pi14-548_cl_pass0_src11.csv
[Sun May 12 16:02:02 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass0_src11_1.ximg exists
[Sun May 12 16:02:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15056_pi14-548_cl_pass0_src11.csv
[Sun May 12 16:02:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15056_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15056_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 16:02:03 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sun May 12 16:02:03 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May 12 16:02:03 2013] Fit fullrun_ccd7_acisf15056_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sun May 12 16:02:07 2013] Spatial fit model total counts = 13.321500, observed total counts = 13.000000
[Sun May 12 16:02:07 2013] Offset between fit and detection position for source 19 = 0.335852 pixels
[Sun May 12 16:02:07 2013] 13.096520 total counts/ 2.613120 bgd. counts: snr = 6.485187
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.335852 pixels
  Position = (730.6, 973.4) = 18 13 49.58 -57 39 24.7
  Extent = 0.8 (0.5-1.0)", rotation angle = 0
  Source counts = 10.5 +/- 3.6
  Background counts = 2.6
  Rate = 0.0007 +/- 0.0002
[Sun May 12 16:02:07 2013] Vigneting correction estimate = 1.000000
[Sun May 12 16:02:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 16:02:07 2013] Assessing source extent using major axis lower bound
[Sun May 12 16:02:07 2013] Source does appear to be extended
[Sun May 12 16:02:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 16:32:44 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 16:32:44 2013] Initial guess for spatial extent in simple fitting = 0.76"
[Sun May 12 16:32:44 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.965
[Sun May 12 16:32:44 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 0.76"
[Sun May 12 16:45:52 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass1_src11.ximg exists
[Sun May 12 16:45:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15056_pi14-548_cl_pass1_src11.csv
[Sun May 12 16:45:52 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass1_src11_1.ximg exists
[Sun May 12 16:45:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15056_pi14-548_cl_pass1_src11.csv
[Sun May 12 16:45:52 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15056_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15056_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 16:45:52 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sun May 12 16:45:52 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sun May 12 16:45:52 2013] Fit fullrun_ccd7_acisf15056_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sun May 12 16:45:57 2013] Spatial fit model total counts = 12.778400, observed total counts = 13.000000
[Sun May 12 16:45:57 2013] Offset between fit and detection position for source 19 = 0.115251 pixels
[Sun May 12 16:45:57 2013] 12.479810 total counts/ 1.428010 bgd. counts: snr = 9.248417
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.115251 pixels
  Position = (730.5, 973.3) = 18 13 49.58 -57 39 24.8
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 11.1 +/- 3.5
  Background counts = 1.4
  Rate = 0.0008 +/- 0.0002
[Sun May 12 16:45:57 2013] Vigneting correction estimate = 1.000000
[Sun May 12 16:45:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 16:45:57 2013] Assessing source extent using major axis lower bound
[Sun May 12 16:45:57 2013] Source does appear to be extended
[Sun May 12 16:45:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 16:52:21 2013] Writing source region out to fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src19_src.reg
[Sun May 12 16:52:21 2013] Extracting stamp from image fullrun_ccd7_acisf15056_pi14-548_cl_sm2.00.img.gz, (690, 933) - (771, 1014)
[Sun May 12 16:52:21 2013] Writing fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src19.gif
[Sun May 12 16:55:15 2013] Size of ../../acisf15056/products/events/fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src19_src.evt.gz[events] = 13 counts
[Sun May 12 16:55:15 2013] Mean chipx,y = (704.69, 667.69)
[Sun May 12 16:55:15 2013] Mean tdetx,y = (4621.69, 2369.69)
[Sun May 12 16:55:15 2013] chipx,y range = (685.00-721.00, 656.00-686.00)
[Sun May 12 16:55:15 2013] Size of ../../acisf15056/products/events/fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 14 counts
[Sun May 12 16:55:16 2013] Not generating rmf since there are only 11 counts
[Sun May 12 16:55:16 2013] arf not found, will run specextract
[Sun May 12 16:55:24 2013] ../../acisf15056/products/spectra/fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src19.warf not found
[Sun May 12 16:55:24 2013] ../../acisf15056/products/spectra/fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src19.wrmf not found
[Sun May 12 16:55:24 2013] Removal of ../../acisf15056/products/spectra/fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src19.soff failed
[Sun May 12 16:57:13 2013] Spectrum 19 has only 11 counts, deleting rmf
[Sun May 12 16:57:13 2013] 221.873
[Sun May 12 16:57:17 2013] Updating aperture counts using extracted products
[Sun May 12 16:57:17 2013] Total counts from fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src19_src.pi.gz = 13.00
[Sun May 12 16:57:17 2013] Total counts from fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src19_bgd.pi.gz = 14.00
[Sun May 12 16:57:17 2013] Got source and background scale factors 0.000002, 0.000029
[Sun May 12 16:57:17 2013] User source parameters:
  Position = (730.5, 973.3) = 18 13 49.58 -57 39 24.8
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source aperture counts = 11.8 +/- 4.7
  Background aperture counts = 1.2
  Rate = 0.0008 +/- 0.0003

[Sun May 12 16:57:18 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 16:57:18 2013] Using photon index=1.80, rate=0.000763, arf fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src19.arf
[Sun May 12 16:57:18 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May 12 16:57:18 2013] Updating source flux to 6e-15
[Sun May 12 16:57:28 2013] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 12 16:57:29 2013] acisf15056/analysis//spectral/fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete