[Sun May 12 15:23:03 2013] Detection parameters:
  Position = (1089.0, 728.4) = 18 13 27.56 -57 41 25.0
  Extent = 0.9" x 0.5", rotation angle = 40 degrees
  Source counts = 14.3 +/- 3.9
  Background counts = 0.7
  Rate = 0.001 +/- 0.0003

[Sun May 12 15:23:03 2013] Off-axis axis estimate = 2.81'
[Sun May 12 15:47:30 2013] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Sun May 12 15:47:30 2013] Initial guess for spatial extent in simple fitting = 0.54"
[Sun May 12 15:47:30 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.167
[Sun May 12 15:47:30 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 0.54"
[Sun May 12 16:02:02 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass0_src8.ximg exists
[Sun May 12 16:02:02 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass0_src8_1.ximg exists
[Sun May 12 16:02:02 2013] Fit fullrun_ccd7_acisf15056_pi14-548_cl_pass0_src8 appears to have run properly
[Sun May 12 16:02:03 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Sun May 12 16:02:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15056_pi14-548_cl_pass0_tfrozen_src8.csv
[Sun May 12 16:02:03 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Sun May 12 16:02:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15056_pi14-548_cl_pass0_tfrozen_src8.csv
[Sun May 12 16:02:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15056_pi14-548_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15056_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 16:02:07 2013] Source 17 is offset by -0.836285 and 0.038160 pixels which is larger than
2 X fitted extent = 0.551756 x 3.562658, not incorporating fit results
[Sun May 12 16:02:07 2013] Vigneting correction estimate = 1.000000
[Sun May 12 16:02:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 16:02:07 2013] Assessing source extent using major
[Sun May 12 16:02:07 2013] Source does appear to be extended
[Sun May 12 16:02:07 2013] Computing asymmetry using major and minor axis, asym = 1.83
[Sun May 12 16:02:07 2013] Source is asymmetric
[Sun May 12 16:32:44 2013] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Sun May 12 16:32:44 2013] Initial guess for spatial extent in simple fitting = 0.54"
[Sun May 12 16:32:44 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.167
[Sun May 12 16:32:44 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 0.54"
[Sun May 12 16:45:52 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass1_src8.ximg exists
[Sun May 12 16:45:52 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass1_src8_1.ximg exists
[Sun May 12 16:45:52 2013] Fit fullrun_ccd7_acisf15056_pi14-548_cl_pass1_src8 appears to have run properly
[Sun May 12 16:45:52 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Sun May 12 16:45:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15056_pi14-548_cl_pass1_tfrozen_src8.csv
[Sun May 12 16:45:52 2013] fullrun_ccd7_acisf15056_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Sun May 12 16:45:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15056_pi14-548_cl_pass1_tfrozen_src8.csv
[Sun May 12 16:45:52 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15056_pi14-548_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15056_pi14-548_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 16:45:57 2013] Source 17 is offset by -0.836285 and 0.038160 pixels which is larger than
2 X fitted extent = 0.551756 x 3.562658, not incorporating fit results
[Sun May 12 16:45:57 2013] Vigneting correction estimate = 1.000000
[Sun May 12 16:45:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 16:45:57 2013] Assessing source extent using major
[Sun May 12 16:45:57 2013] Source does appear to be extended
[Sun May 12 16:45:57 2013] Computing asymmetry using major and minor axis, asym = 1.83
[Sun May 12 16:45:57 2013] Source is asymmetric
[Sun May 12 16:52:21 2013] Writing source region out to fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src17_src.reg
[Sun May 12 16:52:21 2013] Extracting stamp from image fullrun_ccd7_acisf15056_pi14-548_cl_sm2.00.img.gz, (1046, 685) - (1132, 771)
[Sun May 12 16:52:21 2013] Writing fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src17.gif
[Sun May 12 16:54:24 2013] Size of ../../acisf15056/products/events/fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src17_src.evt.gz[events] = 15 counts
[Sun May 12 16:54:24 2013] Mean chipx,y = (295.80, 815.60)
[Sun May 12 16:54:24 2013] Mean tdetx,y = (4212.80, 2517.60)
[Sun May 12 16:54:24 2013] chipx,y range = (282.00-308.00, 797.00-835.00)
[Sun May 12 16:54:24 2013] Size of ../../acisf15056/products/events/fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 15 counts
[Sun May 12 16:54:25 2013] Not generating rmf since there are only 14 counts
[Sun May 12 16:54:25 2013] arf not found, will run specextract
[Sun May 12 16:54:33 2013] ../../acisf15056/products/spectra/fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src17.warf not found
[Sun May 12 16:54:33 2013] ../../acisf15056/products/spectra/fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src17.wrmf not found
[Sun May 12 16:54:33 2013] Removal of ../../acisf15056/products/spectra/fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src17.soff failed
[Sun May 12 16:57:13 2013] Spectrum 17 has only 14 counts, deleting rmf
[Sun May 12 16:57:13 2013] 230.649
[Sun May 12 16:57:17 2013] Updating aperture counts using extracted products
[Sun May 12 16:57:17 2013] Total counts from fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src17_src.pi.gz = 15.00
[Sun May 12 16:57:17 2013] Total counts from fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src17_bgd.pi.gz = 15.00
[Sun May 12 16:57:17 2013] Got source and background scale factors 0.000001, 0.000032
[Sun May 12 16:57:17 2013] User source parameters:
  Position = (1089.0, 728.4) = 18 13 27.56 -57 41 25.0
  Extent = 0.9" x 0.5", rotation angle = 40
  Source aperture counts = 14.3 +/- 5.0
  Background aperture counts = 0.7
  Rate = 0.001 +/- 0.0003

[Sun May 12 16:57:17 2013] Updating counts from extracted products
[Sun May 12 16:57:17 2013] Set source signif. to 14.30/0.83 = 17.16
[Sun May 12 16:57:18 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 16:57:18 2013] Using photon index=1.80, rate=0.000988, arf fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src17.arf
[Sun May 12 16:57:18 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May 12 16:57:18 2013] Updating source flux to 7.7e-15
[Sun May 12 16:57:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 16:57:29 2013] acisf15056/analysis//spectral/fullrun_ccd7_acisf15056_pi14-548_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete