[Mon May 11 15:30:09 2015] Detection parameters:
  Position = (661.7, 334.9) = 6 16 18.10 -21 22 15.1
  Extent = 0.5" x 0.5", rotation angle = 72 degrees
  Source counts = 11.3 +/- 3.5
  Background counts = 0.7
  Rate = 0.001 +/- 0.0004

[Mon May 11 15:30:09 2015] Off-axis axis estimate = 0.46'
[Mon May 11 15:45:02 2015] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon May 11 15:45:02 2015] Initial guess for spatial extent in simple fitting = 0.39"
[Mon May 11 15:45:02 2015] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.884
[Mon May 11 15:45:02 2015] Giving source the simple spatial ID 15 for pass 0, mean size = 0.39"
[Mon May 11 15:55:57 2015] fullrun_ccd7_acisf14799_pi14-548_cl_pass0_src15.ximg exists
[Mon May 11 15:55:57 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14799_pi14-548_cl_pass0_src15.csv
[Mon May 11 15:55:57 2015] fullrun_ccd7_acisf14799_pi14-548_cl_pass0_src15_1.ximg exists
[Mon May 11 15:55:57 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14799_pi14-548_cl_pass0_src15.csv
[Mon May 11 15:55:57 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14799_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14799_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 11 15:55:57 2015] fullrun_ccd7_acisf14799_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Mon May 11 15:55:57 2015] fullrun_ccd7_acisf14799_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Mon May 11 15:55:57 2015] Fit fullrun_ccd7_acisf14799_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Mon May 11 15:56:01 2015] Spatial fit model total counts = 12.349900, observed total counts = 13.000000
[Mon May 11 15:56:01 2015] Offset between fit and detection position for source 13 = 0.718121 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.718121 pixels
  Position = (662.2, 335.4) = 6 16 18.10 -21 22 15.1
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 12.6 +/- 3.6
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Mon May 11 15:56:01 2015] Vigneting correction estimate = 1.000000
[Mon May 11 15:56:01 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 11 15:56:01 2015] Assessing source extent using major axis lower bound
[Mon May 11 15:56:01 2015] Source does appear to be extended
[Mon May 11 15:56:01 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 11 16:09:24 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 11 16:09:24 2015] Initial guess for spatial extent in simple fitting = 0.32"
[Mon May 11 16:09:24 2015] source mask rpix=0.6, npix_max = 5, mask sum = 6, frac = 1.135
[Mon May 11 16:09:24 2015] Giving source the simple spatial ID 15 for pass 1, mean size = 0.32"
[Mon May 11 16:19:13 2015] fullrun_ccd7_acisf14799_pi14-548_cl_pass1_src15.ximg exists
[Mon May 11 16:19:13 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14799_pi14-548_cl_pass1_src15.csv
[Mon May 11 16:19:13 2015] fullrun_ccd7_acisf14799_pi14-548_cl_pass1_src15_1.ximg exists
[Mon May 11 16:19:13 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14799_pi14-548_cl_pass1_src15.csv
[Mon May 11 16:19:13 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14799_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14799_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 11 16:19:13 2015] fullrun_ccd7_acisf14799_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Mon May 11 16:19:13 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14799_pi14-548_cl_pass1_tfrozen_src15.csv
[Mon May 11 16:19:13 2015] fullrun_ccd7_acisf14799_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Mon May 11 16:19:13 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf14799_pi14-548_cl_pass1_tfrozen_src15.csv
[Mon May 11 16:19:13 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf14799_pi14-548_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf14799_pi14-548_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 11 16:19:17 2015] Spatial fit model total counts = 11.448000, observed total counts = 13.000000
[Mon May 11 16:19:17 2015] Offset between fit and detection position for source 13 = 0.049095 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.049095 pixels
  Position = (662.2, 335.5) = 6 16 18.10 -21 22 15.1
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 11.6 +/- 3.4
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Mon May 11 16:19:17 2015] Vigneting correction estimate = 1.000000
[Mon May 11 16:19:17 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 11 16:19:17 2015] Assessing source extent using major axis lower bound
[Mon May 11 16:19:17 2015] Source does appear to be extended
[Mon May 11 16:19:17 2015] Computing asymmetry using major and minor axis, asym = 1.00