[Tue May 14 21:14:46 2013] Detection parameters:
  Position = (226.0, 933.4) = 6 34 16.02 17 43 46.4
  Extent = 0.9" x 0.5", rotation angle = 94 degrees
  Source counts = 25.0 +/- 5.2
  Background counts = 2.0
  Rate = 0.0003 +/- 5e-05

[Tue May 14 21:14:46 2013] Off-axis axis estimate = 5.38'
[Tue May 14 22:06:14 2013] Using EEF radius (= 1.34 ")to estimate initial spatial extent for simple fitting
[Tue May 14 22:06:14 2013] Initial guess for spatial extent in simple fitting = 1.34"
[Tue May 14 22:06:14 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.014
[Tue May 14 22:06:14 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 1.34"
[Tue May 14 22:32:19 2013] fullrun_ccd2_acisf14694_pi14-548_cl_pass0_src12.ximg exists
[Tue May 14 22:32:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14694_pi14-548_cl_pass0_src12.csv
[Tue May 14 22:32:19 2013] fullrun_ccd2_acisf14694_pi14-548_cl_pass0_src12_1.ximg exists
[Tue May 14 22:32:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14694_pi14-548_cl_pass0_src12.csv
[Tue May 14 22:32:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14694_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14694_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 22:32:20 2013] fullrun_ccd2_acisf14694_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Tue May 14 22:32:20 2013] fullrun_ccd2_acisf14694_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Tue May 14 22:32:20 2013] Fit fullrun_ccd2_acisf14694_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Tue May 14 23:12:52 2013] Spatial fit model total counts = 35.872200, observed total counts = 36.000000
[Tue May 14 23:12:52 2013] Offset between fit and detection position for source 11 = 0.897681 pixels
[Tue May 14 23:12:52 2013] 38.156500 total counts/ 18.561300 bgd. counts: snr = 4.548262
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.897681 pixels
  Position = (226.8, 932.9) = 6 34 16.01 17 43 45.9
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 19.6 +/- 6.2
  Background counts = 18.6
  Rate = 0.0002 +/- 6e-05
[Tue May 14 23:12:52 2013] Vigneting correction estimate = 1.000000
[Tue May 14 23:12:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 23:12:52 2013] Assessing source extent using major axis lower bound
[Tue May 14 23:12:52 2013] Source does appear to be extended
[Tue May 14 23:12:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 23:55:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 23:55:31 2013] Initial guess for spatial extent in simple fitting = 0.66"
[Tue May 14 23:55:31 2013] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.180
[Tue May 14 23:55:31 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 0.66"
[Wed May 15 00:22:57 2013] fullrun_ccd2_acisf14694_pi14-548_cl_pass1_src12.ximg exists
[Wed May 15 00:22:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14694_pi14-548_cl_pass1_src12.csv
[Wed May 15 00:22:57 2013] fullrun_ccd2_acisf14694_pi14-548_cl_pass1_src12_1.ximg exists
[Wed May 15 00:22:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14694_pi14-548_cl_pass1_src12.csv
[Wed May 15 00:22:57 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14694_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14694_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 00:22:57 2013] fullrun_ccd2_acisf14694_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Wed May 15 00:22:57 2013] fullrun_ccd2_acisf14694_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Wed May 15 00:22:57 2013] Fit fullrun_ccd2_acisf14694_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Wed May 15 01:00:01 2013] Spatial fit model total counts = 27.896700, observed total counts = 32.000000
[Wed May 15 01:00:01 2013] Offset between fit and detection position for source 11 = 1.306333 pixels
[Wed May 15 01:00:01 2013] 27.945480 total counts/ 1.047080 bgd. counts: snr = 26.286727
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.306333 pixels
  Position = (226.6, 934.2) = 6 34 16.01 17 43 46.6
  Extent = 1.3 (1.0-1.5)" x 0.6 (0.5-0.9)", rotation angle = 76 (62-93) degrees
  Source counts = 26.9 +/- 5.3
  Background counts = 1.0
  Rate = 0.0003 +/- 5e-05
[Wed May 15 01:00:01 2013] Vigneting correction estimate = 1.000000
[Wed May 15 01:00:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 01:00:01 2013] Assessing source extent using major axis lower bound
[Wed May 15 01:00:01 2013] Source does appear to be extended
[Wed May 15 01:00:01 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Wed May 15 01:15:09 2013] Writing source region out to fullrun_ccd2_acisf14694_pi14-548_pass1_cl_src11_src.reg
[Wed May 15 01:15:09 2013] Extracting stamp from image fullrun_ccd2_acisf14694_pi14-548_cl_sm2.00.img.gz, (166, 873) - (287, 995)
[Wed May 15 01:15:09 2013] Writing fullrun_ccd2_acisf14694_pi14-548_pass1_cl_src11.gif
[Wed May 15 01:21:29 2013] Size of ../../acisf14694/products/events/fullrun_ccd2_acisf14694_pi14-548_pass1_cl_src11_src.evt.gz[events] = 32 counts
[Wed May 15 01:21:29 2013] Mean chipx,y = (821.75, 912.94)
[Wed May 15 01:21:29 2013] Mean tdetx,y = (3973.94, 3264.25)
[Wed May 15 01:21:29 2013] chipx,y range = (803.00-839.00, 886.00-928.00)
[Wed May 15 01:21:29 2013] Size of ../../acisf14694/products/events/fullrun_ccd2_acisf14694_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 83 counts
[Wed May 15 01:21:31 2013] Not generating rmf since there are only 26 counts
[Wed May 15 01:21:31 2013] arf not found, will run specextract
[Wed May 15 01:21:59 2013] ../../acisf14694/products/spectra/fullrun_ccd2_acisf14694_pi14-548_pass1_cl_src11.warf not found
[Wed May 15 01:21:59 2013] ../../acisf14694/products/spectra/fullrun_ccd2_acisf14694_pi14-548_pass1_cl_src11.wrmf not found
[Wed May 15 01:21:59 2013] Removal of ../../acisf14694/products/spectra/fullrun_ccd2_acisf14694_pi14-548_pass1_cl_src11.soff failed
[Wed May 15 01:32:41 2013] Spectrum 11 has only 27 counts, deleting rmf
[Wed May 15 01:32:41 2013] 172.816
[Wed May 15 01:42:37 2013] Updating aperture counts using extracted products
[Wed May 15 01:42:37 2013] Total counts from fullrun_ccd2_acisf14694_pi14-548_pass1_cl_src11_src.pi.gz = 32.00
[Wed May 15 01:42:37 2013] Total counts from fullrun_ccd2_acisf14694_pi14-548_pass1_cl_src11_bgd.pi.gz = 83.00
[Wed May 15 01:42:37 2013] Got source and background scale factors 0.000002, 0.000065
[Wed May 15 01:42:37 2013] User source parameters:
  Position = (226.6, 934.2) = 6 34 16.01 17 43 46.6
  Extent = 1.3 (1.0-1.5)" x 0.6 (0.5-0.9)", rotation angle = 76 (62-93) degrees
  Source aperture counts = 28.9 +/- 6.7
  Background aperture counts = 3.1
  Rate = 0.0003 +/- 7e-05

[Wed May 15 01:42:40 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 01:42:40 2013] Using photon index=1.80, rate=0.000279, arf fullrun_ccd2_acisf14694_pi14-548_pass1_cl_src11.arf
[Wed May 15 01:42:40 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May 15 01:42:40 2013] Updating source flux to 3.8e-15
[Wed May 15 01:42:55 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting