[Sun May 12 17:57:36 2013] Detection parameters:
  Position = (313.6, 419.3) = 6 33 49.21 17 41 54.7
  Extent = 0.8" x 0.5", rotation angle = 58 degrees
  Source counts = 30.1 +/- 5.6
  Background counts = 0.9
  Rate = 0.0008 +/- 0.0002

[Sun May 12 17:57:36 2013] Off-axis axis estimate = 5.33'
[Sun May 12 18:45:05 2013] Using EEF radius (= 1.32 ")to estimate initial spatial extent for simple fitting
[Sun May 12 18:45:05 2013] Initial guess for spatial extent in simple fitting = 1.32"
[Sun May 12 18:45:05 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.043
[Sun May 12 18:45:05 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 1.32"
[Sun May 12 18:52:11 2013] fullrun_ccd3_acisf14691_pi14-548_cl_pass0_src4.ximg exists
[Sun May 12 18:52:11 2013] fullrun_ccd3_acisf14691_pi14-548_cl_pass0_src4_1.ximg exists
[Sun May 12 18:52:11 2013] Fit fullrun_ccd3_acisf14691_pi14-548_cl_pass0_src4 appears to have run properly
[Sun May 12 18:52:11 2013] fullrun_ccd3_acisf14691_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sun May 12 18:52:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14691_pi14-548_cl_pass0_tfrozen_src4.csv
[Sun May 12 18:52:11 2013] fullrun_ccd3_acisf14691_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May 12 18:52:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14691_pi14-548_cl_pass0_tfrozen_src4.csv
[Sun May 12 18:52:11 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14691_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14691_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 19:08:40 2013] Spatial fit model total counts = 33.385200, observed total counts = 34.000000
[Sun May 12 19:08:40 2013] Offset between fit and detection position for source 13 = 0.486384 pixels
[Sun May 12 19:08:40 2013] 33.343080 total counts/ 4.532280 bgd. counts: snr = 13.533089
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.486384 pixels
  Position = (314.0, 419.5) = 6 33 49.22 17 41 54.6
  Extent = 1.0 (0.7-1.5)" x 0.7 (0.5-0.9)", rotation angle = 133 (90-90) degrees
  Source counts = 28.8 +/- 5.8
  Background counts = 4.5
  Rate = 0.0008 +/- 0.0002
[Sun May 12 19:08:40 2013] Vigneting correction estimate = 1.000000
[Sun May 12 19:08:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 19:08:40 2013] Assessing source extent using major axis lower bound
[Sun May 12 19:08:40 2013] Source does appear to be extended
[Sun May 12 19:08:40 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.86
[Sun May 12 19:57:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 19:57:45 2013] Initial guess for spatial extent in simple fitting = 0.82"
[Sun May 12 19:57:45 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.067
[Sun May 12 19:57:45 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 0.82"
[Sun May 12 20:04:11 2013] fullrun_ccd3_acisf14691_pi14-548_cl_pass1_src4.ximg exists
[Sun May 12 20:04:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14691_pi14-548_cl_pass1_src4.csv
[Sun May 12 20:04:11 2013] fullrun_ccd3_acisf14691_pi14-548_cl_pass1_src4_1.ximg exists
[Sun May 12 20:04:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14691_pi14-548_cl_pass1_src4.csv
[Sun May 12 20:04:11 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14691_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14691_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 20:04:12 2013] fullrun_ccd3_acisf14691_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sun May 12 20:04:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14691_pi14-548_cl_pass1_tfrozen_src4.csv
[Sun May 12 20:04:12 2013] fullrun_ccd3_acisf14691_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May 12 20:04:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14691_pi14-548_cl_pass1_tfrozen_src4.csv
[Sun May 12 20:04:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14691_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14691_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 20:26:19 2013] Spatial fit model total counts = 27.838200, observed total counts = 35.000000
[Sun May 12 20:26:19 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 20:26:19 2013] Vigneting correction estimate = 1.000000
[Sun May 12 20:26:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 20:26:19 2013] Assessing source extent using major axis lower bound
[Sun May 12 20:26:19 2013] Source does appear to be extended
[Sun May 12 20:26:19 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.86
[Sun May 12 20:44:57 2013] Writing source region out to fullrun_ccd3_acisf14691_pi14-548_pass1_cl_src13_src.reg
[Sun May 12 20:44:57 2013] Extracting stamp from image fullrun_ccd3_acisf14691_pi14-548_cl_sm2.00.img.gz, (270, 375) - (358, 464)
[Sun May 12 20:44:57 2013] Writing fullrun_ccd3_acisf14691_pi14-548_pass1_cl_src13.gif
[Sun May 12 20:46:34 2013] Size of ../../acisf14691/products/events/fullrun_ccd3_acisf14691_pi14-548_pass1_cl_src13_src.evt.gz[events] = 30 counts
[Sun May 12 20:46:34 2013] Mean chipx,y = (846.37, 379.03)
[Sun May 12 20:46:34 2013] Mean tdetx,y = (4752.97, 3907.37)
[Sun May 12 20:46:34 2013] chipx,y range = (829.00-863.00, 361.00-400.00)
[Sun May 12 20:46:34 2013] Size of ../../acisf14691/products/events/fullrun_ccd3_acisf14691_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 13 counts
[Sun May 12 20:46:35 2013] Not generating rmf since there are only 28 counts
[Sun May 12 20:46:35 2013] arf not found, will run specextract
[Sun May 12 20:46:58 2013] ../../acisf14691/products/spectra/fullrun_ccd3_acisf14691_pi14-548_pass1_cl_src13.warf not found
[Sun May 12 20:46:58 2013] ../../acisf14691/products/spectra/fullrun_ccd3_acisf14691_pi14-548_pass1_cl_src13.wrmf not found
[Sun May 12 20:46:58 2013] Removal of ../../acisf14691/products/spectra/fullrun_ccd3_acisf14691_pi14-548_pass1_cl_src13.soff failed
[Sun May 12 20:49:11 2013] Spectrum 13 has only 29 counts, deleting rmf
[Sun May 12 20:49:11 2013] 188.245
[Sun May 12 20:49:39 2013] Updating aperture counts using extracted products
[Sun May 12 20:49:39 2013] Total counts from fullrun_ccd3_acisf14691_pi14-548_pass1_cl_src13_src.pi.gz = 30.00
[Sun May 12 20:49:39 2013] Total counts from fullrun_ccd3_acisf14691_pi14-548_pass1_cl_src13_bgd.pi.gz = 13.00
[Sun May 12 20:49:39 2013] Got source and background scale factors 0.000002, 0.000034
[Sun May 12 20:49:39 2013] User source parameters:
  Position = (314.0, 419.5) = 6 33 49.22 17 41 54.6
  Extent = 1.0 (0.7-1.5)" x 0.7 (0.5-0.9)", rotation angle = 133 (90-90) degrees
  Source aperture counts = 29.2 +/- 6.5
  Background aperture counts = 0.8
  Rate = 0.0008 +/- 0.0002

[Sun May 12 20:49:39 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 20:49:39 2013] Using photon index=1.80, rate=0.000788, arf fullrun_ccd3_acisf14691_pi14-548_pass1_cl_src13.arf
[Sun May 12 20:49:39 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May 12 20:49:39 2013] Updating source flux to 9.9e-15
[Sun May 12 20:49:44 2013] Flag p found in src. 13 procflags, skipping spectral fitting
[Sun May 12 20:49:44 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting