[Sun May 12 17:57:06 2013] Detection parameters:
  Position = (1135.5, 217.5) = 6 33 29.10 17 48 37.7
  Extent = 1.3" x 0.8", rotation angle = 85 degrees
  Source counts = 36.8 +/- 6.2
  Background counts = 2.2
  Rate = 0.001 +/- 0.0002

[Sun May 12 17:57:06 2013] Off-axis axis estimate = 6.22'
[Sun May 12 18:34:43 2013] Using EEF radius (= 1.74 ")to estimate initial spatial extent for simple fitting
[Sun May 12 18:34:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 18:34:43 2013] Initial guess for spatial extent in simple fitting = 1.74"
[Sun May 12 18:34:43 2013] source mask rpix=3.5, npix_max = 65, mask sum = 72, frac = 1.104
[Sun May 12 18:34:43 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 1.74"
[Sun May 12 18:45:05 2013] fullrun_ccd2_acisf14691_pi14-548_cl_pass0_src1.ximg exists
[Sun May 12 18:45:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14691_pi14-548_cl_pass0_src1.csv
[Sun May 12 18:45:05 2013] fullrun_ccd2_acisf14691_pi14-548_cl_pass0_src1_1.ximg exists
[Sun May 12 18:45:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14691_pi14-548_cl_pass0_src1.csv
[Sun May 12 18:45:05 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14691_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14691_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 18:45:05 2013] fullrun_ccd2_acisf14691_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun May 12 18:45:05 2013] fullrun_ccd2_acisf14691_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 12 18:45:05 2013] Fit fullrun_ccd2_acisf14691_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 12 19:08:39 2013] Spatial fit model total counts = 44.372100, observed total counts = 44.000000
[Sun May 12 19:08:39 2013] Offset between fit and detection position for source 2 = 0.169824 pixels
[Sun May 12 19:08:39 2013] 44.672287 total counts/ 0.944987 bgd. counts: snr = 44.982102
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.169824 pixels
  Position = (1135.6, 217.4) = 6 33 29.11 17 48 37.4
  Extent = 1.4 (1.1-1.7)", rotation angle = 0
  Source counts = 43.7 +/- 6.7
  Background counts = 0.9
  Rate = 0.001 +/- 0.0002
[Sun May 12 19:08:39 2013] Vigneting correction estimate = 1.000000
[Sun May 12 19:08:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 19:08:39 2013] Assessing source extent using major axis lower bound
[Sun May 12 19:08:39 2013] Source does appear to be extended
[Sun May 12 19:08:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 19:46:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 19:46:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 19:46:54 2013] Initial guess for spatial extent in simple fitting = 1.44"
[Sun May 12 19:46:54 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.897
[Sun May 12 19:46:54 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 1.44"
[Sun May 12 19:57:45 2013] fullrun_ccd2_acisf14691_pi14-548_cl_pass1_src1.ximg exists
[Sun May 12 19:57:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14691_pi14-548_cl_pass1_src1.csv
[Sun May 12 19:57:45 2013] fullrun_ccd2_acisf14691_pi14-548_cl_pass1_src1_1.ximg exists
[Sun May 12 19:57:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14691_pi14-548_cl_pass1_src1.csv
[Sun May 12 19:57:45 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14691_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14691_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 19:57:45 2013] fullrun_ccd2_acisf14691_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun May 12 19:57:45 2013] fullrun_ccd2_acisf14691_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 12 19:57:45 2013] Fit fullrun_ccd2_acisf14691_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 12 20:26:18 2013] Spatial fit model total counts = 44.278600, observed total counts = 44.000000
[Sun May 12 20:26:18 2013] Offset between fit and detection position for source 2 = 0.164903 pixels
[Sun May 12 20:26:18 2013] 44.851520 total counts/ 1.767820 bgd. counts: snr = 32.403653
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.164903 pixels
  Position = (1135.5, 217.3) = 6 33 29.11 17 48 37.3
  Extent = 1.3 (1.1-1.6)", rotation angle = 0
  Source counts = 43.1 +/- 6.7
  Background counts = 1.8
  Rate = 0.001 +/- 0.0002
[Sun May 12 20:26:18 2013] Vigneting correction estimate = 1.000000
[Sun May 12 20:26:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 20:26:18 2013] Assessing source extent using major axis lower bound
[Sun May 12 20:26:18 2013] Source does appear to be extended
[Sun May 12 20:26:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 20:38:32 2013] Writing source region out to fullrun_ccd2_acisf14691_pi14-548_pass1_cl_src2_src.reg
[Sun May 12 20:38:32 2013] Extracting stamp from image fullrun_ccd2_acisf14691_pi14-548_cl_sm2.00.img.gz, (1075, 157) - (1196, 278)
[Sun May 12 20:38:32 2013] Writing fullrun_ccd2_acisf14691_pi14-548_pass1_cl_src2.gif
[Sun May 12 20:38:34 2013] Size of ../../acisf14691/products/events/fullrun_ccd2_acisf14691_pi14-548_pass1_cl_src2_src.evt.gz[events] = 43 counts
[Sun May 12 20:38:34 2013] Mean chipx,y = (932.79, 1010.33)
[Sun May 12 20:38:34 2013] Mean tdetx,y = (4071.33, 3153.21)
[Sun May 12 20:38:34 2013] chipx,y range = (911.00-953.00, 996.00-1022.00)
[Sun May 12 20:38:34 2013] Size of ../../acisf14691/products/events/fullrun_ccd2_acisf14691_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 21 counts
[Sun May 12 20:38:35 2013] Not generating rmf since there are only 43 counts
[Sun May 12 20:38:35 2013] arf not found, will run specextract
[Sun May 12 20:39:12 2013] ../../acisf14691/products/spectra/fullrun_ccd2_acisf14691_pi14-548_pass1_cl_src2.warf not found
[Sun May 12 20:39:12 2013] ../../acisf14691/products/spectra/fullrun_ccd2_acisf14691_pi14-548_pass1_cl_src2.wrmf not found
[Sun May 12 20:39:12 2013] Removal of ../../acisf14691/products/spectra/fullrun_ccd2_acisf14691_pi14-548_pass1_cl_src2.soff failed
[Sun May 12 20:44:57 2013] Spectrum 2 has only 43 counts, deleting rmf
[Sun May 12 20:44:57 2013] 97.8646
[Sun May 12 20:49:37 2013] Updating aperture counts using extracted products
[Sun May 12 20:49:37 2013] Total counts from fullrun_ccd2_acisf14691_pi14-548_pass1_cl_src2_src.pi.gz = 43.00
[Sun May 12 20:49:37 2013] Total counts from fullrun_ccd2_acisf14691_pi14-548_pass1_cl_src2_bgd.pi.gz = 21.00
[Sun May 12 20:49:37 2013] Got source and background scale factors 0.000005, 0.000064
[Sun May 12 20:49:37 2013] User source parameters:
  Position = (1135.5, 217.3) = 6 33 29.11 17 48 37.3
  Extent = 1.3 (1.1-1.6)", rotation angle = 0
  Source aperture counts = 41.2 +/- 7.6
  Background aperture counts = 1.8
  Rate = 0.001 +/- 0.0002

[Sun May 12 20:49:38 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 20:49:38 2013] Using photon index=1.80, rate=0.00118, arf fullrun_ccd2_acisf14691_pi14-548_pass1_cl_src2.arf
[Sun May 12 20:49:38 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May 12 20:49:38 2013] Updating source flux to 2.8e-14
[Sun May 12 20:49:43 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 12 20:49:44 2013] acisf14691/analysis//spectral/fullrun_ccd2_acisf14691_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete