[Fri May 17 17:27:40 2013] Detection parameters:
  Position = (47.7, 960.5) = 3 59 46.91 54 18 4.4
  Extent = 2.8" x 1.4", rotation angle = 59 degrees
  Source counts = 14.1 +/- 4.8
  Background counts = 8.9
  Rate = 0.0002 +/- 8e-05

[Fri May 17 17:27:41 2013] Off-axis axis estimate = 10.01'
[Fri May 17 17:52:40 2013] Using EEF radius (= 4.44 ")to estimate initial spatial extent for simple fitting
[Fri May 17 17:52:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 17 17:52:40 2013] Initial guess for spatial extent in simple fitting = 4.44"
[Fri May 17 17:52:40 2013] source mask rpix=9.0, npix_max = 362, mask sum = 361, frac = 0.995
[Fri May 17 17:52:40 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 4.44"
[Fri May 17 18:16:06 2013] fullrun_ccd3_acisf14690_pi14-548_cl_pass0_src12.ximg exists
[Fri May 17 18:16:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14690_pi14-548_cl_pass0_src12.csv
[Fri May 17 18:16:06 2013] fullrun_ccd3_acisf14690_pi14-548_cl_pass0_src12_1.ximg exists
[Fri May 17 18:16:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14690_pi14-548_cl_pass0_src12.csv
[Fri May 17 18:16:06 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14690_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14690_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 18:16:06 2013] fullrun_ccd3_acisf14690_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Fri May 17 18:16:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14690_pi14-548_cl_pass0_tfrozen_src12.csv
[Fri May 17 18:16:06 2013] fullrun_ccd3_acisf14690_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Fri May 17 18:16:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14690_pi14-548_cl_pass0_tfrozen_src12.csv
[Fri May 17 18:16:06 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14690_pi14-548_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14690_pi14-548_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 19:07:37 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 50.924599 pixels away
[Fri May 17 19:07:37 2013] Vigneting correction estimate = 1.000000
[Fri May 17 19:07:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 19:07:37 2013] Assessing source extent using major
[Fri May 17 19:07:37 2013] Source does appear to be extended
[Fri May 17 19:07:37 2013] Computing asymmetry using major and minor axis, asym = 1.97
[Fri May 17 19:07:37 2013] Source is asymmetric
[Fri May 17 19:26:25 2013] Using EEF radius (= 4.44 ")to estimate initial spatial extent for simple fitting
[Fri May 17 19:26:25 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 17 19:26:25 2013] Initial guess for spatial extent in simple fitting = 4.44"
[Fri May 17 19:26:25 2013] source mask rpix=9.0, npix_max = 362, mask sum = 361, frac = 0.995
[Fri May 17 19:26:25 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 4.44"
[Fri May 17 19:47:46 2013] fullrun_ccd3_acisf14690_pi14-548_cl_pass1_src12.ximg exists
[Fri May 17 19:47:46 2013] fullrun_ccd3_acisf14690_pi14-548_cl_pass1_src12_1.ximg exists
[Fri May 17 19:47:46 2013] Fit fullrun_ccd3_acisf14690_pi14-548_cl_pass1_src12 appears to have run properly
[Fri May 17 19:47:46 2013] fullrun_ccd3_acisf14690_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Fri May 17 19:47:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14690_pi14-548_cl_pass1_tfrozen_src12.csv
[Fri May 17 19:47:46 2013] fullrun_ccd3_acisf14690_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Fri May 17 19:47:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14690_pi14-548_cl_pass1_tfrozen_src12.csv
[Fri May 17 19:47:46 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14690_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14690_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:44:57 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 51.170397 pixels away
[Fri May 17 20:44:57 2013] Vigneting correction estimate = 1.000000
[Fri May 17 20:44:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 20:44:57 2013] Assessing source extent using major
[Fri May 17 20:44:57 2013] Source does appear to be extended
[Fri May 17 20:44:57 2013] Computing asymmetry using major and minor axis, asym = 1.97
[Fri May 17 20:44:57 2013] Source is asymmetric
[Fri May 17 20:58:40 2013] Writing source region out to fullrun_ccd3_acisf14690_pi14-548_pass1_cl_src11_src.reg
[Fri May 17 20:58:40 2013] Extracting stamp from image fullrun_ccd3_acisf14690_pi14-548_cl_sm2.00.img.gz, (0, 832) - (176, 1089)
[Fri May 17 20:58:40 2013] Writing fullrun_ccd3_acisf14690_pi14-548_pass1_cl_src11.gif
[Fri May 17 21:04:24 2013] Size of ../../acisf14690/products/events/fullrun_ccd3_acisf14690_pi14-548_pass1_cl_src11_src.evt.gz[events] = 27 counts
[Fri May 17 21:04:24 2013] Mean chipx,y = (32.48, 22.33)
[Fri May 17 21:04:24 2013] Mean tdetx,y = (5109.67, 3093.48)
[Fri May 17 21:04:24 2013] chipx,y range = (15.00-53.00, 8.00-46.00)
[Fri May 17 21:04:24 2013] Size of ../../acisf14690/products/events/fullrun_ccd3_acisf14690_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 80 counts
[Fri May 17 21:04:26 2013] Not generating rmf since there are only 14 counts
[Fri May 17 21:04:26 2013] arf not found, will run specextract
[Fri May 17 21:04:34 2013] ../../acisf14690/products/spectra/fullrun_ccd3_acisf14690_pi14-548_pass1_cl_src11.warf not found
[Fri May 17 21:04:34 2013] ../../acisf14690/products/spectra/fullrun_ccd3_acisf14690_pi14-548_pass1_cl_src11.wrmf not found
[Fri May 17 21:04:34 2013] Removal of ../../acisf14690/products/spectra/fullrun_ccd3_acisf14690_pi14-548_pass1_cl_src11.soff failed
[Fri May 17 21:10:36 2013] Spectrum 11 has only 14 counts, deleting rmf
[Fri May 17 21:10:36 2013] 156.234
[Fri May 17 21:12:06 2013] Updating aperture counts using extracted products
[Fri May 17 21:12:06 2013] Total counts from fullrun_ccd3_acisf14690_pi14-548_pass1_cl_src11_src.pi.gz = 27.00
[Fri May 17 21:12:07 2013] Total counts from fullrun_ccd3_acisf14690_pi14-548_pass1_cl_src11_bgd.pi.gz = 80.00
[Fri May 17 21:12:07 2013] Got source and background scale factors 0.000012, 0.000287
[Fri May 17 21:12:07 2013] User source parameters:
  Position = (47.7, 960.5) = 3 59 46.91 54 18 4.4
  Extent = 2.8" x 1.4", rotation angle = 59
  Source aperture counts = 23.6 +/- 6.3
  Background aperture counts = 3.4
  Rate = 0.0004 +/- 0.0001

[Fri May 17 21:12:07 2013] Updating counts from extracted products
[Fri May 17 21:12:07 2013] Set source signif. to 23.57/1.85 = 12.73
[Fri May 17 21:12:08 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 21:12:08 2013] Using photon index=1.80, rate=0.000379, arf fullrun_ccd3_acisf14690_pi14-548_pass1_cl_src11.arf
[Fri May 17 21:12:08 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 17 21:12:08 2013] Updating source flux to 6.4e-15
[Fri May 17 21:12:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting