[Sun May 12 07:58:23 2013] Detection parameters: Position = (400.0, 809.2) = 3 58 37.06 54 11 52.7 Extent = 0.8" x 0.5", rotation angle = 21 degrees Source counts = 17.4 +/- 4.2 Background counts = 0.6 Rate = 0.0007 +/- 0.0002 [Sun May 12 07:58:23 2013] Off-axis axis estimate = 3.45' [Sun May 12 08:14:40 2013] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting [Sun May 12 08:14:40 2013] Initial guess for spatial extent in simple fitting = 0.68" [Sun May 12 08:14:40 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.128 [Sun May 12 08:14:40 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 0.68" [Sun May 12 08:20:12 2013] fullrun_ccd2_acisf14688_pi14-548_cl_pass0_src3.ximg exists [Sun May 12 08:20:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14688_pi14-548_cl_pass0_src3.csv [Sun May 12 08:20:12 2013] fullrun_ccd2_acisf14688_pi14-548_cl_pass0_src3_1.ximg exists [Sun May 12 08:20:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14688_pi14-548_cl_pass0_src3.csv [Sun May 12 08:20:12 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf14688_pi14-548_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf14688_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 12 08:20:12 2013] fullrun_ccd2_acisf14688_pi14-548_cl_pass0_tfrozen_src3.ximg exists [Sun May 12 08:20:12 2013] fullrun_ccd2_acisf14688_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists [Sun May 12 08:20:12 2013] Fit fullrun_ccd2_acisf14688_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly [Sun May 12 09:01:21 2013] Spatial fit model total counts = 16.133800, observed total counts = 18.000000 [Sun May 12 09:01:21 2013] Offset between fit and detection position for source 7 = 0.442204 pixels Spatial fit parameters: Offset between fit and detection position for source 7 = 0.442204 pixels Position = (400.4, 809.5) = 3 58 37.07 54 11 52.6 Extent = 1.0 (0.8-1.5)" x 0.5 (0.4-0.8)", rotation angle = 169 (324-0) degrees Source counts = 16.7 +/- 4.1 Background counts = 0.0 Rate = 0.0006 +/- 0.0002 [Sun May 12 09:01:21 2013] Vigneting correction estimate = 1.000000 [Sun May 12 09:01:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 12 09:01:21 2013] Assessing source extent using major axis lower bound [Sun May 12 09:01:21 2013] Source does appear to be extended [Sun May 12 09:01:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00 [Sun May 12 09:13:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sun May 12 09:13:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 12 09:13:14 2013] Initial guess for spatial extent in simple fitting = 0.78" [Sun May 12 09:13:14 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.140 [Sun May 12 09:13:14 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 0.78" [Sun May 12 09:18:49 2013] fullrun_ccd2_acisf14688_pi14-548_cl_pass1_src3.ximg exists [Sun May 12 09:18:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14688_pi14-548_cl_pass1_src3.csv [Sun May 12 09:18:49 2013] fullrun_ccd2_acisf14688_pi14-548_cl_pass1_src3_1.ximg exists [Sun May 12 09:18:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14688_pi14-548_cl_pass1_src3.csv [Sun May 12 09:18:49 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf14688_pi14-548_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf14688_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 12 09:18:49 2013] fullrun_ccd2_acisf14688_pi14-548_cl_pass1_tfrozen_src3.ximg exists [Sun May 12 09:18:49 2013] fullrun_ccd2_acisf14688_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists [Sun May 12 09:18:49 2013] Fit fullrun_ccd2_acisf14688_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly [Sun May 12 10:06:23 2013] Spatial fit model total counts = 16.287900, observed total counts = 18.000000 [Sun May 12 10:06:23 2013] Offset between fit and detection position for source 7 = 0.072307 pixels Spatial fit parameters: Offset between fit and detection position for source 7 = 0.072307 pixels Position = (400.4, 809.5) = 3 58 37.06 54 11 52.6 Extent = 1.1 (0.8-1.6)" x 0.5 (0.4-0.8)", rotation angle = 349 (322-6) degrees Source counts = 16.9 +/- 4.1 Background counts = 0.0 Rate = 0.0006 +/- 0.0002 [Sun May 12 10:06:23 2013] Vigneting correction estimate = 1.000000 [Sun May 12 10:06:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 12 10:06:23 2013] Assessing source extent using major axis lower bound [Sun May 12 10:06:23 2013] Source does appear to be extended [Sun May 12 10:06:23 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01 [Sun May 12 10:09:34 2013] Writing source region out to fullrun_ccd2_acisf14688_pi14-548_pass1_cl_src7_src.reg [Sun May 12 10:09:34 2013] Extracting stamp from image fullrun_ccd2_acisf14688_pi14-548_cl_sm2.00.img.gz, (352, 761) - (449, 858) [Sun May 12 10:09:34 2013] Writing fullrun_ccd2_acisf14688_pi14-548_pass1_cl_src7.gif [Sun May 12 10:10:50 2013] Size of ../../acisf14688/products/events/fullrun_ccd2_acisf14688_pi14-548_pass1_cl_src7_src.evt.gz[events] = 17 counts [Sun May 12 10:10:50 2013] Mean chipx,y = (249.59, 645.71) [Sun May 12 10:10:50 2013] Mean tdetx,y = (3706.71, 3836.41) [Sun May 12 10:10:50 2013] chipx,y range = (228.00-266.00, 630.00-663.00) [Sun May 12 10:10:50 2013] Size of ../../acisf14688/products/events/fullrun_ccd2_acisf14688_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 18 counts [Sun May 12 10:10:51 2013] Not generating rmf since there are only 16 counts [Sun May 12 10:10:51 2013] arf not found, will run specextract [Sun May 12 10:11:18 2013] ../../acisf14688/products/spectra/fullrun_ccd2_acisf14688_pi14-548_pass1_cl_src7.warf not found [Sun May 12 10:11:18 2013] ../../acisf14688/products/spectra/fullrun_ccd2_acisf14688_pi14-548_pass1_cl_src7.wrmf not found [Sun May 12 10:11:18 2013] Removal of ../../acisf14688/products/spectra/fullrun_ccd2_acisf14688_pi14-548_pass1_cl_src7.soff failed [Sun May 12 10:12:32 2013] Spectrum 7 has only 17 counts, deleting rmf [Sun May 12 10:12:32 2013] 179.447 [Sun May 12 10:17:23 2013] Updating aperture counts using extracted products [Sun May 12 10:17:23 2013] Total counts from fullrun_ccd2_acisf14688_pi14-548_pass1_cl_src7_src.pi.gz = 17.00 [Sun May 12 10:17:23 2013] Total counts from fullrun_ccd2_acisf14688_pi14-548_pass1_cl_src7_bgd.pi.gz = 18.00 [Sun May 12 10:17:24 2013] Got source and background scale factors 0.000002, 0.000042 [Sun May 12 10:17:24 2013] User source parameters: Position = (400.4, 809.5) = 3 58 37.06 54 11 52.6 Extent = 1.1 (0.8-1.6)" x 0.5 (0.4-0.8)", rotation angle = 349 (322-6) degrees Source aperture counts = 16.3 +/- 5.2 Background aperture counts = 0.7 Rate = 0.0006 +/- 0.0002 [Sun May 12 10:17:24 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 12 10:17:24 2013] Using photon index=1.80, rate=0.000634, arf fullrun_ccd2_acisf14688_pi14-548_pass1_cl_src7.arf [Sun May 12 10:17:24 2013] Assuming count rate is from the 0.20-8.00 bandpass [Sun May 12 10:17:24 2013] Updating source flux to 9.5e-15 [Sun May 12 10:17:32 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting [Sun May 12 10:17:33 2013] acisf14688/analysis//spectral/fullrun_ccd2_acisf14688_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete