[Mon May 13 17:27:53 2013] Detection parameters:
  Position = (586.1, 323.4) = 0 47 35.72 -73 4 25.1
  Extent = 0.5" x 0.5", rotation angle = 45 degrees
  Source counts = 11.4 +/- 3.5
  Background counts = 0.6
  Rate = 0.0002 +/- 8e-05

[Mon May 13 17:27:53 2013] Off-axis axis estimate = 4.14'
[Mon May 13 17:48:09 2013] Using EEF radius (= 0.87 ")to estimate initial spatial extent for simple fitting
[Mon May 13 17:48:09 2013] Initial guess for spatial extent in simple fitting = 0.87"
[Mon May 13 17:48:09 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.969
[Mon May 13 17:48:09 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 0.87"
[Mon May 13 18:08:43 2013] fullrun_ccd1_acisf14674_pi14-548_cl_pass0_src12.ximg exists
[Mon May 13 18:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14674_pi14-548_cl_pass0_src12.csv
[Mon May 13 18:08:43 2013] fullrun_ccd1_acisf14674_pi14-548_cl_pass0_src12_1.ximg exists
[Mon May 13 18:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14674_pi14-548_cl_pass0_src12.csv
[Mon May 13 18:08:43 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14674_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14674_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 18:08:43 2013] fullrun_ccd1_acisf14674_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Mon May 13 18:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14674_pi14-548_cl_pass0_tfrozen_src12.csv
[Mon May 13 18:08:43 2013] fullrun_ccd1_acisf14674_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Mon May 13 18:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14674_pi14-548_cl_pass0_tfrozen_src12.csv
[Mon May 13 18:08:43 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14674_pi14-548_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14674_pi14-548_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 19:10:08 2013] Spatial fit model total counts = 11.995000, observed total counts = 14.000000
[Mon May 13 19:10:08 2013] Offset between fit and detection position for source 10 = 0.635812 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.635812 pixels
  Position = (586.6, 323.8) = 0 47 35.73 -73 4 25.1
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 12.4 +/- 3.5
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Mon May 13 19:10:08 2013] Vigneting correction estimate = 1.000000
[Mon May 13 19:10:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 19:10:08 2013] Assessing source extent using major axis lower bound
[Mon May 13 19:10:08 2013] Source does appear to be extended
[Mon May 13 19:10:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 19:25:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 19:25:38 2013] Initial guess for spatial extent in simple fitting = 0.62"
[Mon May 13 19:25:38 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.979
[Mon May 13 19:25:38 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 0.62"
[Mon May 13 19:46:44 2013] fullrun_ccd1_acisf14674_pi14-548_cl_pass1_src12.ximg exists
[Mon May 13 19:46:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14674_pi14-548_cl_pass1_src12.csv
[Mon May 13 19:46:44 2013] fullrun_ccd1_acisf14674_pi14-548_cl_pass1_src12_1.ximg exists
[Mon May 13 19:46:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14674_pi14-548_cl_pass1_src12.csv
[Mon May 13 19:46:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14674_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14674_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 19:46:44 2013] fullrun_ccd1_acisf14674_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Mon May 13 19:46:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14674_pi14-548_cl_pass1_tfrozen_src12.csv
[Mon May 13 19:46:44 2013] fullrun_ccd1_acisf14674_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Mon May 13 19:46:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14674_pi14-548_cl_pass1_tfrozen_src12.csv
[Mon May 13 19:46:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14674_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14674_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 20:38:48 2013] Spatial fit model total counts = 12.162800, observed total counts = 15.000000
[Mon May 13 20:38:48 2013] Offset between fit and detection position for source 10 = 0.029053 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.029053 pixels
  Position = (586.5, 323.9) = 0 47 35.73 -73 4 25.1
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 12.6 +/- 3.6
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Mon May 13 20:38:48 2013] Vigneting correction estimate = 1.000000
[Mon May 13 20:38:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 20:38:48 2013] Assessing source extent using major axis lower bound
[Mon May 13 20:38:48 2013] Source does appear to be extended
[Mon May 13 20:38:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 20:45:21 2013] Writing source region out to fullrun_ccd1_acisf14674_pi14-548_pass1_cl_src10_src.reg
[Mon May 13 20:45:21 2013] Extracting stamp from image fullrun_ccd1_acisf14674_pi14-548_cl_sm2.00.img.gz, (559, 296) - (614, 352)
[Mon May 13 20:45:21 2013] Writing fullrun_ccd1_acisf14674_pi14-548_pass1_cl_src10.gif
[Mon May 13 20:50:56 2013] Size of ../../acisf14674/products/events/fullrun_ccd1_acisf14674_pi14-548_pass1_cl_src10_src.evt.gz[events] = 12 counts
[Mon May 13 20:50:56 2013] Mean chipx,y = (141.83, 591.92)
[Mon May 13 20:50:56 2013] Mean tdetx,y = (4540.08, 4248.83)
[Mon May 13 20:50:56 2013] chipx,y range = (124.00-158.00, 578.00-611.00)
[Mon May 13 20:50:56 2013] Size of ../../acisf14674/products/events/fullrun_ccd1_acisf14674_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 6 counts
[Mon May 13 20:50:57 2013] Not generating rmf since there are only 12 counts
[Mon May 13 20:50:57 2013] arf not found, will run specextract
[Mon May 13 20:51:21 2013] ../../acisf14674/products/spectra/fullrun_ccd1_acisf14674_pi14-548_pass1_cl_src10.warf not found
[Mon May 13 20:51:21 2013] ../../acisf14674/products/spectra/fullrun_ccd1_acisf14674_pi14-548_pass1_cl_src10.wrmf not found
[Mon May 13 20:51:21 2013] Removal of ../../acisf14674/products/spectra/fullrun_ccd1_acisf14674_pi14-548_pass1_cl_src10.soff failed
[Mon May 13 20:53:47 2013] Spectrum 10 has only 13 counts, deleting rmf
[Mon May 13 20:53:47 2013] 195.866
[Mon May 13 21:07:36 2013] Updating aperture counts using extracted products
[Mon May 13 21:07:36 2013] Total counts from fullrun_ccd1_acisf14674_pi14-548_pass1_cl_src10_src.pi.gz = 12.00
[Mon May 13 21:07:36 2013] Total counts from fullrun_ccd1_acisf14674_pi14-548_pass1_cl_src10_bgd.pi.gz = 6.00
[Mon May 13 21:07:36 2013] Got source and background scale factors 0.000001, 0.000013
[Mon May 13 21:07:36 2013] User source parameters:
  Position = (586.5, 323.9) = 0 47 35.73 -73 4 25.1
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source aperture counts = 11.5 +/- 4.6
  Background aperture counts = 0.5
  Rate = 0.0003 +/- 0.0001

[Mon May 13 21:07:37 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 21:07:37 2013] Using photon index=1.80, rate=0.000275, arf fullrun_ccd1_acisf14674_pi14-548_pass1_cl_src10.arf
[Mon May 13 21:07:37 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 13 21:07:37 2013] Updating source flux to 3.5e-15
[Mon May 13 21:07:47 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting