[Sat May 11 20:15:02 2013] Detection parameters:
  Position = (505.8, 752.2) = 0 50 31.27 -72 53 17.5
  Extent = 0.5" x 0.5", rotation angle = 162 degrees
  Source counts = 10.5 +/- 3.3
  Background counts = 0.5
  Rate = 0.0002 +/- 7e-05

[Sat May 11 20:15:02 2013] Off-axis axis estimate = 4.97'
[Sat May 11 21:07:38 2013] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Sat May 11 21:07:38 2013] Initial guess for spatial extent in simple fitting = 1.17"
[Sat May 11 21:07:38 2013] source mask rpix=2.4, npix_max = 33, mask sum = 31, frac = 0.939
[Sat May 11 21:07:38 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 1.17"
[Sat May 11 21:25:31 2013] fullrun_ccd2_acisf14672_pi14-548_cl_pass0_src15.ximg exists
[Sat May 11 21:25:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14672_pi14-548_cl_pass0_src15.csv
[Sat May 11 21:25:31 2013] fullrun_ccd2_acisf14672_pi14-548_cl_pass0_src15_1.ximg exists
[Sat May 11 21:25:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14672_pi14-548_cl_pass0_src15.csv
[Sat May 11 21:25:31 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14672_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14672_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 21:25:32 2013] fullrun_ccd2_acisf14672_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Sat May 11 21:25:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14672_pi14-548_cl_pass0_tfrozen_src15.csv
[Sat May 11 21:25:32 2013] fullrun_ccd2_acisf14672_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Sat May 11 21:25:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14672_pi14-548_cl_pass0_tfrozen_src15.csv
[Sat May 11 21:25:32 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14672_pi14-548_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14672_pi14-548_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 22:45:33 2013] Spatial fit model total counts = 15.289600, observed total counts = 12.000000
[Sat May 11 22:45:33 2013] Offset between fit and detection position for source 17 = 1.059422 pixels
[Sat May 11 22:45:33 2013] 15.490800 total counts/ 0.000000 bgd. counts: snr = 22838672522.286308
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.059422 pixels
  Position = (506.4, 753.1) = 0 50 31.26 -72 53 17.3
  Extent = 0.8 (0.7-1.1)", rotation angle = 0
  Source counts = 15.5 +/- 3.9
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Sat May 11 22:45:33 2013] Vigneting correction estimate = 1.000000
[Sat May 11 22:45:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 22:45:33 2013] Assessing source extent using major axis lower bound
[Sat May 11 22:45:33 2013] Source does appear to be extended
[Sat May 11 22:45:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 23:27:16 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 23:27:16 2013] Initial guess for spatial extent in simple fitting = 0.82"
[Sat May 11 23:27:16 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Sat May 11 23:27:16 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 0.82"
[Sat May 11 23:46:34 2013] fullrun_ccd2_acisf14672_pi14-548_cl_pass1_src15.ximg exists
[Sat May 11 23:46:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14672_pi14-548_cl_pass1_src15.csv
[Sat May 11 23:46:34 2013] fullrun_ccd2_acisf14672_pi14-548_cl_pass1_src15_1.ximg exists
[Sat May 11 23:46:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14672_pi14-548_cl_pass1_src15.csv
[Sat May 11 23:46:34 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14672_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14672_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 23:46:34 2013] fullrun_ccd2_acisf14672_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Sat May 11 23:46:34 2013] fullrun_ccd2_acisf14672_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Sat May 11 23:46:34 2013] Fit fullrun_ccd2_acisf14672_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Sun May 12 01:10:02 2013] Spatial fit model total counts = 15.898100, observed total counts = 14.000000
[Sun May 12 01:10:02 2013] Offset between fit and detection position for source 17 = 0.099272 pixels
[Sun May 12 01:10:02 2013] 16.995970 total counts/ 0.441870 bgd. counts: snr = 24.903381
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.099272 pixels
  Position = (506.4, 753.0) = 0 50 31.26 -72 53 17.4
  Extent = 0.8 (0.6-1.3)", rotation angle = 0
  Source counts = 16.6 +/- 4.1
  Background counts = 0.4
  Rate = 0.0004 +/- 9e-05
[Sun May 12 01:10:02 2013] Vigneting correction estimate = 1.000000
[Sun May 12 01:10:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 01:10:02 2013] Assessing source extent using major axis lower bound
[Sun May 12 01:10:02 2013] Source does appear to be extended
[Sun May 12 01:10:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 01:25:45 2013] Writing source region out to fullrun_ccd2_acisf14672_pi14-548_pass1_cl_src17_src.reg
[Sun May 12 01:25:45 2013] Extracting stamp from image fullrun_ccd2_acisf14672_pi14-548_cl_sm2.00.img.gz, (468, 715) - (545, 791)
[Sun May 12 01:25:45 2013] Writing fullrun_ccd2_acisf14672_pi14-548_pass1_cl_src17.gif
[Sun May 12 01:34:55 2013] Size of ../../acisf14672/products/events/fullrun_ccd2_acisf14672_pi14-548_pass1_cl_src17_src.evt.gz[events] = 12 counts
[Sun May 12 01:34:55 2013] Mean chipx,y = (582.08, 683.00)
[Sun May 12 01:34:55 2013] Mean tdetx,y = (3744.00, 3503.92)
[Sun May 12 01:34:55 2013] chipx,y range = (556.00-590.00, 662.00-698.00)
[Sun May 12 01:34:55 2013] Size of ../../acisf14672/products/events/fullrun_ccd2_acisf14672_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 10 counts
[Sun May 12 01:34:56 2013] Not generating rmf since there are only 16 counts
[Sun May 12 01:34:56 2013] arf not found, will run specextract
[Sun May 12 01:35:23 2013] ../../acisf14672/products/spectra/fullrun_ccd2_acisf14672_pi14-548_pass1_cl_src17.warf not found
[Sun May 12 01:35:23 2013] ../../acisf14672/products/spectra/fullrun_ccd2_acisf14672_pi14-548_pass1_cl_src17.wrmf not found
[Sun May 12 01:35:23 2013] Removal of ../../acisf14672/products/spectra/fullrun_ccd2_acisf14672_pi14-548_pass1_cl_src17.soff failed
[Sun May 12 01:41:50 2013] Spectrum 17 has only 17 counts, deleting rmf
[Sun May 12 01:41:50 2013] 149.026
[Sun May 12 01:47:40 2013] Updating aperture counts using extracted products
[Sun May 12 01:47:40 2013] Total counts from fullrun_ccd2_acisf14672_pi14-548_pass1_cl_src17_src.pi.gz = 12.00
[Sun May 12 01:47:40 2013] Total counts from fullrun_ccd2_acisf14672_pi14-548_pass1_cl_src17_bgd.pi.gz = 10.00
[Sun May 12 01:47:40 2013] Got source and background scale factors 0.000002, 0.000026
[Sun May 12 01:47:40 2013] User source parameters:
  Position = (506.4, 753.0) = 0 50 31.26 -72 53 17.4
  Extent = 0.8 (0.6-1.3)", rotation angle = 0
  Source aperture counts = 11.2 +/- 4.6
  Background aperture counts = 0.8
  Rate = 0.0002 +/- 0.0001

[Sun May 12 01:47:42 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 01:47:42 2013] Using photon index=1.80, rate=0.00037, arf fullrun_ccd2_acisf14672_pi14-548_pass1_cl_src17.arf
[Sun May 12 01:47:42 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May 12 01:47:42 2013] Updating source flux to 6.1e-15
[Sun May 12 01:47:54 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 12 01:47:55 2013] acisf14672/analysis//spectral/fullrun_ccd2_acisf14672_pi14-548_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete