[Thu Jun  6 22:10:12 2013] Detection parameters:
  Position = (312.8, 526.5) = 0 55 54.03 -72 16 42.0
  Extent = 0.8" x 0.5", rotation angle = 5 degrees
  Source counts = 20.8 +/- 4.7
  Background counts = 1.2
  Rate = 0.0004 +/- 0.0001

[Thu Jun  6 22:10:12 2013] Off-axis axis estimate = 5.10'
[Thu Jun  6 23:09:04 2013] Using EEF radius (= 1.22 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 23:09:04 2013] Initial guess for spatial extent in simple fitting = 1.22"
[Thu Jun  6 23:09:04 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.010
[Thu Jun  6 23:09:04 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 1.22"
[Thu Jun  6 23:28:39 2013] fullrun_ccd1_acisf14671_pi14-548_cl_pass0_src8.ximg exists
[Thu Jun  6 23:28:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14671_pi14-548_cl_pass0_src8.csv
[Thu Jun  6 23:28:39 2013] fullrun_ccd1_acisf14671_pi14-548_cl_pass0_src8_1.ximg exists
[Thu Jun  6 23:28:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14671_pi14-548_cl_pass0_src8.csv
[Thu Jun  6 23:28:39 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14671_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14671_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 23:28:39 2013] fullrun_ccd1_acisf14671_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Thu Jun  6 23:28:39 2013] fullrun_ccd1_acisf14671_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Jun  6 23:28:39 2013] Fit fullrun_ccd1_acisf14671_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Jun  7 00:23:24 2013] Spatial fit model total counts = 23.359600, observed total counts = 26.000000
[Fri Jun  7 00:23:24 2013] Offset between fit and detection position for source 9 = 1.021274 pixels
[Fri Jun  7 00:23:24 2013] 22.536820 total counts/ 2.423620 bgd. counts: snr = 12.919595
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.021274 pixels
  Position = (313.8, 526.8) = 0 55 53.98 -72 16 42.1
  Extent = 1.1 (0.8-1.6)", rotation angle = 347 (336-356) degrees
  Source counts = 20.1 +/- 4.7
  Background counts = 2.4
  Rate = 0.0004 +/- 0.0001
[Fri Jun  7 00:23:24 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 00:23:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 00:23:24 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 00:23:24 2013] Source does appear to be extended
[Fri Jun  7 00:23:24 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.81
[Fri Jun  7 00:23:24 2013] Source is asymmetric
[Fri Jun  7 01:23:17 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  7 01:23:17 2013] Initial guess for spatial extent in simple fitting = 0.70"
[Fri Jun  7 01:23:17 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.082
[Fri Jun  7 01:23:17 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 0.70"
[Fri Jun  7 01:42:28 2013] fullrun_ccd1_acisf14671_pi14-548_cl_pass1_src8.ximg exists
[Fri Jun  7 01:42:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14671_pi14-548_cl_pass1_src8.csv
[Fri Jun  7 01:42:28 2013] fullrun_ccd1_acisf14671_pi14-548_cl_pass1_src8_1.ximg exists
[Fri Jun  7 01:42:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14671_pi14-548_cl_pass1_src8.csv
[Fri Jun  7 01:42:28 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14671_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14671_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 01:42:28 2013] fullrun_ccd1_acisf14671_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Fri Jun  7 01:42:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14671_pi14-548_cl_pass1_tfrozen_src8.csv
[Fri Jun  7 01:42:28 2013] fullrun_ccd1_acisf14671_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jun  7 01:42:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14671_pi14-548_cl_pass1_tfrozen_src8.csv
[Fri Jun  7 01:42:28 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14671_pi14-548_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14671_pi14-548_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 02:34:31 2013] Spatial fit model total counts = 21.902100, observed total counts = 26.000000
[Fri Jun  7 02:34:31 2013] Offset between fit and detection position for source 9 = 0.102259 pixels
[Fri Jun  7 02:34:31 2013] 20.565143 total counts/ 0.379343 bgd. counts: snr = 32.774036
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.102259 pixels
  Position = (313.9, 526.8) = 0 55 53.97 -72 16 42.1
  Extent = 1.1 (0.9-1.5)" x 0.3 (0.2-0.4)", rotation angle = 345 (337-355) degrees
  Source counts = 20.2 +/- 4.5
  Background counts = 0.4
  Rate = 0.0004 +/- 9e-05
[Fri Jun  7 02:34:31 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 02:34:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 02:34:31 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 02:34:31 2013] Source does appear to be extended
[Fri Jun  7 02:34:31 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.22
[Fri Jun  7 02:34:31 2013] Source is asymmetric
[Fri Jun  7 02:47:25 2013] Writing source region out to fullrun_ccd1_acisf14671_pi14-548_pass1_cl_src9_src.reg
[Fri Jun  7 02:47:25 2013] Extracting stamp from image fullrun_ccd1_acisf14671_pi14-548_cl_sm2.00.img.gz, (262, 475) - (366, 578)
[Fri Jun  7 02:47:25 2013] Writing fullrun_ccd1_acisf14671_pi14-548_pass1_cl_src9.gif
[Fri Jun  7 02:51:07 2013] Size of ../../acisf14671/products/events/fullrun_ccd1_acisf14671_pi14-548_pass1_cl_src9_src.evt.gz[events] = 21 counts
[Fri Jun  7 02:51:07 2013] Mean chipx,y = (275.52, 546.62)
[Fri Jun  7 02:51:07 2013] Mean tdetx,y = (4585.38, 4382.52)
[Fri Jun  7 02:51:07 2013] chipx,y range = (258.00-294.00, 532.00-570.00)
[Fri Jun  7 02:51:07 2013] Size of ../../acisf14671/products/events/fullrun_ccd1_acisf14671_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 34 counts
[Fri Jun  7 02:51:09 2013] Not generating rmf since there are only 20 counts
[Fri Jun  7 02:51:09 2013] arf not found, will run specextract
[Fri Jun  7 02:51:32 2013] ../../acisf14671/products/spectra/fullrun_ccd1_acisf14671_pi14-548_pass1_cl_src9.warf not found
[Fri Jun  7 02:51:32 2013] ../../acisf14671/products/spectra/fullrun_ccd1_acisf14671_pi14-548_pass1_cl_src9.wrmf not found
[Fri Jun  7 02:51:32 2013] Removal of ../../acisf14671/products/spectra/fullrun_ccd1_acisf14671_pi14-548_pass1_cl_src9.soff failed
[Fri Jun  7 02:56:05 2013] Spectrum 9 has only 20 counts, deleting rmf
[Fri Jun  7 02:56:05 2013] 170.42
[Fri Jun  7 03:16:02 2013] Updating aperture counts using extracted products
[Fri Jun  7 03:16:02 2013] Total counts from fullrun_ccd1_acisf14671_pi14-548_pass1_cl_src9_src.pi.gz = 21.00
[Fri Jun  7 03:16:02 2013] Total counts from fullrun_ccd1_acisf14671_pi14-548_pass1_cl_src9_bgd.pi.gz = 34.00
[Fri Jun  7 03:16:02 2013] Got source and background scale factors 0.000001, 0.000047
[Fri Jun  7 03:16:02 2013] User source parameters:
  Position = (313.9, 526.8) = 0 55 53.97 -72 16 42.1
  Extent = 1.1 (0.9-1.5)" x 0.3 (0.2-0.4)", rotation angle = 345 (337-355) degrees
  Source aperture counts = 20.2 +/- 5.7
  Background aperture counts = 0.8
  Rate = 0.0004 +/- 0.0001

[Fri Jun  7 03:16:03 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 03:16:03 2013] Using photon index=1.80, rate=0.000419, arf fullrun_ccd1_acisf14671_pi14-548_pass1_cl_src9.arf
[Fri Jun  7 03:16:03 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jun  7 03:16:03 2013] Updating source flux to 5.8e-15
[Fri Jun  7 03:16:14 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting