[Sat May 11 15:28:53 2013] Detection parameters:
  Position = (618.6, 220.4) = 0 56 45.42 -72 33 44.3
  Extent = 0.5" x 0.5", rotation angle = 154 degrees
  Source counts = 13.4 +/- 3.7
  Background counts = 0.6
  Rate = 0.0003 +/- 8e-05

[Sat May 11 15:28:53 2013] Off-axis axis estimate = 3.09'
[Sat May 11 16:48:35 2013] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Sat May 11 16:48:35 2013] Initial guess for spatial extent in simple fitting = 0.60"
[Sat May 11 16:48:35 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.765
[Sat May 11 16:48:35 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 0.60"
[Sat May 11 17:11:46 2013] fullrun_ccd3_acisf14668_pi14-548_cl_pass0_src17.ximg exists
[Sat May 11 17:11:46 2013] fullrun_ccd3_acisf14668_pi14-548_cl_pass0_src17_1.ximg exists
[Sat May 11 17:11:46 2013] Fit fullrun_ccd3_acisf14668_pi14-548_cl_pass0_src17 appears to have run properly
[Sat May 11 17:11:46 2013] fullrun_ccd3_acisf14668_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Sat May 11 17:11:46 2013] fullrun_ccd3_acisf14668_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Sat May 11 17:11:46 2013] Fit fullrun_ccd3_acisf14668_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Sat May 11 17:38:49 2013] Spatial fit model total counts = 15.528000, observed total counts = 16.000000
[Sat May 11 17:38:49 2013] Offset between fit and detection position for source 17 = 0.697364 pixels
[Sat May 11 17:38:49 2013] 15.677030 total counts/ 2.384030 bgd. counts: snr = 8.609286
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.697364 pixels
  Position = (619.1, 220.9) = 0 56 45.42 -72 33 44.3
  Extent = 0.7 (0.5-1.1)" x 0.4 (0.3-0.6)", rotation angle = 26 (1-51) degrees
  Source counts = 13.3 +/- 4.0
  Background counts = 2.4
  Rate = 0.0003 +/- 8e-05
[Sat May 11 17:38:49 2013] Vigneting correction estimate = 1.000000
[Sat May 11 17:38:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 17:38:49 2013] Assessing source extent using major axis lower bound
[Sat May 11 17:38:49 2013] Source does appear to be extended
[Sat May 11 17:38:49 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.90
[Sat May 11 18:49:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 18:49:45 2013] Initial guess for spatial extent in simple fitting = 0.54"
[Sat May 11 18:49:45 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.874
[Sat May 11 18:49:45 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 0.54"
[Sat May 11 19:11:46 2013] fullrun_ccd3_acisf14668_pi14-548_cl_pass1_src17.ximg exists
[Sat May 11 19:11:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14668_pi14-548_cl_pass1_src17.csv
[Sat May 11 19:11:46 2013] fullrun_ccd3_acisf14668_pi14-548_cl_pass1_src17_1.ximg exists
[Sat May 11 19:11:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14668_pi14-548_cl_pass1_src17.csv
[Sat May 11 19:11:46 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14668_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14668_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 19:11:46 2013] fullrun_ccd3_acisf14668_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Sat May 11 19:11:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14668_pi14-548_cl_pass1_tfrozen_src17.csv
[Sat May 11 19:11:46 2013] fullrun_ccd3_acisf14668_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Sat May 11 19:11:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14668_pi14-548_cl_pass1_tfrozen_src17.csv
[Sat May 11 19:11:46 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14668_pi14-548_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14668_pi14-548_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 19:39:12 2013] Spatial fit model total counts = 12.798600, observed total counts = 18.000000
[Sat May 11 19:39:12 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 19:39:12 2013] Vigneting correction estimate = 1.000000
[Sat May 11 19:39:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 19:39:12 2013] Assessing source extent using major axis lower bound
[Sat May 11 19:39:12 2013] Source does appear to be extended
[Sat May 11 19:39:12 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.90
[Sat May 11 20:06:54 2013] Writing source region out to fullrun_ccd3_acisf14668_pi14-548_pass1_cl_src17_src.reg
[Sat May 11 20:06:54 2013] Extracting stamp from image fullrun_ccd3_acisf14668_pi14-548_cl_sm2.00.img.gz, (586, 188) - (652, 254)
[Sat May 11 20:06:54 2013] Writing fullrun_ccd3_acisf14668_pi14-548_pass1_cl_src17.gif
[Sat May 11 20:16:47 2013] Size of ../../acisf14668/products/events/fullrun_ccd3_acisf14668_pi14-548_pass1_cl_src17_src.evt.gz[events] = 14 counts
[Sat May 11 20:16:47 2013] Mean chipx,y = (603.43, 871.36)
[Sat May 11 20:16:47 2013] Mean tdetx,y = (4260.64, 3664.43)
[Sat May 11 20:16:47 2013] chipx,y range = (588.00-617.00, 849.00-885.00)
[Sat May 11 20:16:47 2013] Size of ../../acisf14668/products/events/fullrun_ccd3_acisf14668_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 13 counts
[Sat May 11 20:16:48 2013] Not generating rmf since there are only 13 counts
[Sat May 11 20:16:48 2013] arf not found, will run specextract
[Sat May 11 20:17:15 2013] ../../acisf14668/products/spectra/fullrun_ccd3_acisf14668_pi14-548_pass1_cl_src17.warf not found
[Sat May 11 20:17:15 2013] ../../acisf14668/products/spectra/fullrun_ccd3_acisf14668_pi14-548_pass1_cl_src17.wrmf not found
[Sat May 11 20:17:15 2013] Removal of ../../acisf14668/products/spectra/fullrun_ccd3_acisf14668_pi14-548_pass1_cl_src17.soff failed
[Sat May 11 20:24:37 2013] Spectrum 17 has only 13 counts, deleting rmf
[Sat May 11 20:24:37 2013] 190.84
[Sat May 11 20:25:08 2013] Updating aperture counts using extracted products
[Sat May 11 20:25:08 2013] Total counts from fullrun_ccd3_acisf14668_pi14-548_pass1_cl_src17_src.pi.gz = 14.00
[Sat May 11 20:25:08 2013] Total counts from fullrun_ccd3_acisf14668_pi14-548_pass1_cl_src17_bgd.pi.gz = 13.00
[Sat May 11 20:25:08 2013] Got source and background scale factors 0.000001, 0.000019
[Sat May 11 20:25:08 2013] User source parameters:
  Position = (619.1, 220.9) = 0 56 45.42 -72 33 44.3
  Extent = 0.7 (0.5-1.1)" x 0.4 (0.3-0.6)", rotation angle = 26 (1-51) degrees
  Source aperture counts = 13.4 +/- 4.8
  Background aperture counts = 0.6
  Rate = 0.0003 +/- 0.0001

[Sat May 11 20:25:10 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 20:25:10 2013] Using photon index=1.80, rate=0.000269, arf fullrun_ccd3_acisf14668_pi14-548_pass1_cl_src17.arf
[Sat May 11 20:25:10 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 11 20:25:10 2013] Updating source flux to 3.5e-15
[Sat May 11 20:25:39 2013] Flag p found in src. 17 procflags, skipping spectral fitting
[Sat May 11 20:25:39 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting