[Mon May 13 23:30:00 2013] Detection parameters:
  Position = (983.9, 467.6) = 1 13 41.88 -73 5 30.2
  Extent = 0.6" x 0.5", rotation angle = 40 degrees
  Source counts = 13.3 +/- 3.7
  Background counts = 0.7
  Rate = 0.0003 +/- 8e-05

[Mon May 13 23:30:00 2013] Off-axis axis estimate = 3.58'
[Tue May 14 00:18:02 2013] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:18:02 2013] Initial guess for spatial extent in simple fitting = 0.71"
[Tue May 14 00:18:02 2013] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.053
[Tue May 14 00:18:02 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 0.71"
[Tue May 14 00:29:07 2013] fullrun_ccd3_acisf14667_pi14-548_cl_pass0_src10.ximg exists
[Tue May 14 00:29:07 2013] fullrun_ccd3_acisf14667_pi14-548_cl_pass0_src10_1.ximg exists
[Tue May 14 00:29:07 2013] Fit fullrun_ccd3_acisf14667_pi14-548_cl_pass0_src10 appears to have run properly
[Tue May 14 00:29:07 2013] fullrun_ccd3_acisf14667_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Tue May 14 00:29:07 2013] fullrun_ccd3_acisf14667_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Tue May 14 00:29:07 2013] Fit fullrun_ccd3_acisf14667_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Tue May 14 00:37:29 2013] Spatial fit model total counts = 16.708300, observed total counts = 17.000000
[Tue May 14 00:37:29 2013] Offset between fit and detection position for source 11 = 0.665130 pixels
[Tue May 14 00:37:29 2013] 16.862380 total counts/ 3.630380 bgd. counts: snr = 6.944635
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.665130 pixels
  Position = (984.3, 468.1) = 1 13 41.89 -73 5 30.2
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 13.2 +/- 4.1
  Background counts = 3.6
  Rate = 0.0003 +/- 9e-05
[Tue May 14 00:37:29 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:37:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:37:29 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:37:29 2013] Source does appear to be extended
[Tue May 14 00:37:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 01:23:23 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 01:23:23 2013] Initial guess for spatial extent in simple fitting = 0.65"
[Tue May 14 01:23:23 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.905
[Tue May 14 01:23:23 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 0.65"
[Tue May 14 01:35:19 2013] fullrun_ccd3_acisf14667_pi14-548_cl_pass1_src10.ximg exists
[Tue May 14 01:35:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14667_pi14-548_cl_pass1_src10.csv
[Tue May 14 01:35:19 2013] fullrun_ccd3_acisf14667_pi14-548_cl_pass1_src10_1.ximg exists
[Tue May 14 01:35:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14667_pi14-548_cl_pass1_src10.csv
[Tue May 14 01:35:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14667_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14667_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:35:19 2013] fullrun_ccd3_acisf14667_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue May 14 01:35:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14667_pi14-548_cl_pass1_tfrozen_src10.csv
[Tue May 14 01:35:19 2013] fullrun_ccd3_acisf14667_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue May 14 01:35:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14667_pi14-548_cl_pass1_tfrozen_src10.csv
[Tue May 14 01:35:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14667_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14667_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:38:43 2013] Spatial fit model total counts = 13.441800, observed total counts = 18.000000
[Tue May 14 01:38:43 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 01:38:43 2013] Vigneting correction estimate = 1.000000
[Tue May 14 01:38:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 01:38:43 2013] Assessing source extent using major axis lower bound
[Tue May 14 01:38:43 2013] Source does appear to be extended
[Tue May 14 01:38:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 01:57:39 2013] Writing source region out to fullrun_ccd3_acisf14667_pi14-548_pass1_cl_src11_src.reg
[Tue May 14 01:57:39 2013] Extracting stamp from image fullrun_ccd3_acisf14667_pi14-548_cl_sm2.00.img.gz, (955, 438) - (1014, 498)
[Tue May 14 01:57:39 2013] Writing fullrun_ccd3_acisf14667_pi14-548_pass1_cl_src11.gif
[Tue May 14 02:02:47 2013] Size of ../../acisf14667/products/events/fullrun_ccd3_acisf14667_pi14-548_pass1_cl_src11_src.evt.gz[events] = 14 counts
[Tue May 14 02:02:47 2013] Mean chipx,y = (950.93, 590.50)
[Tue May 14 02:02:47 2013] Mean tdetx,y = (4541.50, 4011.93)
[Tue May 14 02:02:47 2013] chipx,y range = (940.00-970.00, 577.00-612.00)
[Tue May 14 02:02:47 2013] Size of ../../acisf14667/products/events/fullrun_ccd3_acisf14667_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 13 counts
[Tue May 14 02:02:49 2013] Not generating rmf since there are only 13 counts
[Tue May 14 02:02:49 2013] arf not found, will run specextract
[Tue May 14 02:03:14 2013] ../../acisf14667/products/spectra/fullrun_ccd3_acisf14667_pi14-548_pass1_cl_src11.warf not found
[Tue May 14 02:03:14 2013] ../../acisf14667/products/spectra/fullrun_ccd3_acisf14667_pi14-548_pass1_cl_src11.wrmf not found
[Tue May 14 02:03:14 2013] Removal of ../../acisf14667/products/spectra/fullrun_ccd3_acisf14667_pi14-548_pass1_cl_src11.soff failed
[Tue May 14 02:07:03 2013] Spectrum 11 has only 13 counts, deleting rmf
[Tue May 14 02:07:03 2013] 195.959
[Tue May 14 02:07:29 2013] Updating aperture counts using extracted products
[Tue May 14 02:07:29 2013] Total counts from fullrun_ccd3_acisf14667_pi14-548_pass1_cl_src11_src.pi.gz = 14.00
[Tue May 14 02:07:29 2013] Total counts from fullrun_ccd3_acisf14667_pi14-548_pass1_cl_src11_bgd.pi.gz = 13.00
[Tue May 14 02:07:29 2013] Got source and background scale factors 0.000001, 0.000015
[Tue May 14 02:07:29 2013] User source parameters:
  Position = (984.3, 468.1) = 1 13 41.89 -73 5 30.2
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source aperture counts = 12.9 +/- 4.8
  Background aperture counts = 1.1
  Rate = 0.0003 +/- 0.0001

[Tue May 14 02:07:30 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 02:07:30 2013] Using photon index=1.80, rate=0.000285, arf fullrun_ccd3_acisf14667_pi14-548_pass1_cl_src11.arf
[Tue May 14 02:07:30 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Tue May 14 02:07:30 2013] Updating source flux to 3.5e-15
[Tue May 14 02:07:41 2013] Flag p found in src. 11 procflags, skipping spectral fitting
[Tue May 14 02:07:41 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting