[Mon May 13 23:29:37 2013] Detection parameters:
  Position = (957.1, 468.7) = 1 13 40.60 -73 14 0.8
  Extent = 1.2" x 0.7", rotation angle = 132 degrees
  Source counts = 19.5 +/- 4.6
  Background counts = 1.5
  Rate = 0.0004 +/- 0.0001

[Mon May 13 23:29:37 2013] Off-axis axis estimate = 4.93'
[Tue May 14 00:08:04 2013] Using EEF radius (= 1.15 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:08:04 2013] Initial guess for spatial extent in simple fitting = 1.15"
[Tue May 14 00:08:04 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.114
[Tue May 14 00:08:04 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 1.15"
[Tue May 14 00:18:02 2013] fullrun_ccd2_acisf14667_pi14-548_cl_pass0_src5.ximg exists
[Tue May 14 00:18:02 2013] fullrun_ccd2_acisf14667_pi14-548_cl_pass0_src5_1.ximg exists
[Tue May 14 00:18:02 2013] Fit fullrun_ccd2_acisf14667_pi14-548_cl_pass0_src5 appears to have run properly
[Tue May 14 00:18:02 2013] fullrun_ccd2_acisf14667_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Tue May 14 00:18:02 2013] fullrun_ccd2_acisf14667_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Tue May 14 00:18:02 2013] Fit fullrun_ccd2_acisf14667_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Tue May 14 00:37:27 2013] Spatial fit model total counts = 20.728200, observed total counts = 22.000000
[Tue May 14 00:37:27 2013] Offset between fit and detection position for source 2 = 1.321259 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.321259 pixels
  Position = (958.4, 468.3) = 1 13 40.52 -73 14 1.3
  Extent = 1.2 (0.9-1.4)", rotation angle = 0
  Source counts = 20.8 +/- 4.6
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Tue May 14 00:37:27 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:37:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:37:27 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:37:27 2013] Source does appear to be extended
[Tue May 14 00:37:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 01:13:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 01:13:38 2013] Initial guess for spatial extent in simple fitting = 1.21"
[Tue May 14 01:13:38 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.029
[Tue May 14 01:13:38 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 1.21"
[Tue May 14 01:23:23 2013] fullrun_ccd2_acisf14667_pi14-548_cl_pass1_src5.ximg exists
[Tue May 14 01:23:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14667_pi14-548_cl_pass1_src5.csv
[Tue May 14 01:23:23 2013] fullrun_ccd2_acisf14667_pi14-548_cl_pass1_src5_1.ximg exists
[Tue May 14 01:23:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14667_pi14-548_cl_pass1_src5.csv
[Tue May 14 01:23:23 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14667_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14667_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:23:23 2013] fullrun_ccd2_acisf14667_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Tue May 14 01:23:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14667_pi14-548_cl_pass1_tfrozen_src5.csv
[Tue May 14 01:23:23 2013] fullrun_ccd2_acisf14667_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Tue May 14 01:23:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14667_pi14-548_cl_pass1_tfrozen_src5.csv
[Tue May 14 01:23:23 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14667_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14667_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:38:42 2013] Spatial fit model total counts = 19.635800, observed total counts = 22.000000
[Tue May 14 01:38:42 2013] Offset between fit and detection position for source 2 = 0.086367 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.086367 pixels
  Position = (958.5, 468.3) = 1 13 40.51 -73 14 1.3
  Extent = 1.2 (0.8-1.4)", rotation angle = 0
  Source counts = 19.5 +/- 4.4
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Tue May 14 01:38:42 2013] Vigneting correction estimate = 1.000000
[Tue May 14 01:38:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 01:38:42 2013] Assessing source extent using major axis lower bound
[Tue May 14 01:38:42 2013] Source does appear to be extended
[Tue May 14 01:38:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 01:51:47 2013] Writing source region out to fullrun_ccd2_acisf14667_pi14-548_pass1_cl_src2_src.reg
[Tue May 14 01:51:47 2013] Extracting stamp from image fullrun_ccd2_acisf14667_pi14-548_cl_sm2.00.img.gz, (905, 415) - (1012, 522)
[Tue May 14 01:51:47 2013] Writing fullrun_ccd2_acisf14667_pi14-548_pass1_cl_src2.gif
[Tue May 14 01:54:09 2013] Size of ../../acisf14667/products/events/fullrun_ccd2_acisf14667_pi14-548_pass1_cl_src2_src.evt.gz[events] = 23 counts
[Tue May 14 01:54:09 2013] Mean chipx,y = (92.39, 436.61)
[Tue May 14 01:54:09 2013] Mean tdetx,y = (3497.61, 3993.61)
[Tue May 14 01:54:09 2013] chipx,y range = (71.00-111.00, 421.00-456.00)
[Tue May 14 01:54:09 2013] Size of ../../acisf14667/products/events/fullrun_ccd2_acisf14667_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 33 counts
[Tue May 14 01:54:10 2013] Not generating rmf since there are only 19 counts
[Tue May 14 01:54:10 2013] arf not found, will run specextract
[Tue May 14 01:54:34 2013] ../../acisf14667/products/spectra/fullrun_ccd2_acisf14667_pi14-548_pass1_cl_src2.warf not found
[Tue May 14 01:54:34 2013] ../../acisf14667/products/spectra/fullrun_ccd2_acisf14667_pi14-548_pass1_cl_src2.wrmf not found
[Tue May 14 01:54:34 2013] Removal of ../../acisf14667/products/spectra/fullrun_ccd2_acisf14667_pi14-548_pass1_cl_src2.soff failed
[Tue May 14 01:57:39 2013] Spectrum 2 has only 20 counts, deleting rmf
[Tue May 14 01:57:39 2013] 184.528
[Tue May 14 02:07:27 2013] Updating aperture counts using extracted products
[Tue May 14 02:07:27 2013] Total counts from fullrun_ccd2_acisf14667_pi14-548_pass1_cl_src2_src.pi.gz = 23.00
[Tue May 14 02:07:27 2013] Total counts from fullrun_ccd2_acisf14667_pi14-548_pass1_cl_src2_bgd.pi.gz = 33.00
[Tue May 14 02:07:27 2013] Got source and background scale factors 0.000004, 0.000050
[Tue May 14 02:07:27 2013] User source parameters:
  Position = (958.5, 468.3) = 1 13 40.51 -73 14 1.3
  Extent = 1.2 (0.8-1.4)", rotation angle = 0
  Source aperture counts = 20.2 +/- 5.9
  Background aperture counts = 2.8
  Rate = 0.0004 +/- 0.0001

[Tue May 14 02:07:28 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 02:07:28 2013] Using photon index=1.80, rate=0.00042, arf fullrun_ccd2_acisf14667_pi14-548_pass1_cl_src2.arf
[Tue May 14 02:07:28 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Tue May 14 02:07:28 2013] Updating source flux to 5.4e-15
[Tue May 14 02:07:40 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 14 02:07:41 2013] acisf14667/analysis//spectral/fullrun_ccd2_acisf14667_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete