[Wed May  1 08:11:51 2013] Detection parameters:
  Position = (771.9, 1000.3) = 1 12 55.07 -72 35 41.4
  Extent = 0.6" x 0.5", rotation angle = 137 degrees
  Source counts = 17.3 +/- 4.2
  Background counts = 0.7
  Rate = 0.0004 +/- 9e-05

[Wed May  1 08:11:52 2013] Off-axis axis estimate = 3.65'
[Wed May  1 08:58:05 2013] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Wed May  1 08:58:05 2013] Initial guess for spatial extent in simple fitting = 0.73"
[Wed May  1 08:58:05 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.013
[Wed May  1 08:58:05 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 0.73"
[Wed May  1 09:22:14 2013] fullrun_ccd2_acisf14665_pi14-548_cl_pass0_src15.ximg exists
[Wed May  1 09:22:14 2013] fullrun_ccd2_acisf14665_pi14-548_cl_pass0_src15_1.ximg exists
[Wed May  1 09:22:14 2013] Fit fullrun_ccd2_acisf14665_pi14-548_cl_pass0_src15 appears to have run properly
[Wed May  1 09:22:14 2013] fullrun_ccd2_acisf14665_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Wed May  1 09:22:14 2013] fullrun_ccd2_acisf14665_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Wed May  1 09:22:14 2013] Fit fullrun_ccd2_acisf14665_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Wed May  1 10:03:51 2013] Spatial fit model total counts = 18.323400, observed total counts = 19.000000
[Wed May  1 10:03:51 2013] Offset between fit and detection position for source 6 = 0.883434 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.883434 pixels
  Position = (772.5, 1000.9) = 1 12 55.05 -72 35 41.3
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 18.3 +/- 4.3
  Background counts = 0.0
  Rate = 0.0004 +/- 9e-05
[Wed May  1 10:03:51 2013] Vigneting correction estimate = 1.000000
[Wed May  1 10:03:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 10:03:51 2013] Assessing source extent using major axis lower bound
[Wed May  1 10:03:51 2013] Source does appear to be extended
[Wed May  1 10:03:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 10:45:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 10:45:42 2013] Initial guess for spatial extent in simple fitting = 0.74"
[Wed May  1 10:45:42 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.002
[Wed May  1 10:45:42 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 0.74"
[Wed May  1 11:07:32 2013] fullrun_ccd2_acisf14665_pi14-548_cl_pass1_src15.ximg exists
[Wed May  1 11:07:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14665_pi14-548_cl_pass1_src15.csv
[Wed May  1 11:07:32 2013] fullrun_ccd2_acisf14665_pi14-548_cl_pass1_src15_1.ximg exists
[Wed May  1 11:07:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14665_pi14-548_cl_pass1_src15.csv
[Wed May  1 11:07:32 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14665_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14665_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 11:07:32 2013] fullrun_ccd2_acisf14665_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Wed May  1 11:07:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14665_pi14-548_cl_pass1_tfrozen_src15.csv
[Wed May  1 11:07:32 2013] fullrun_ccd2_acisf14665_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Wed May  1 11:07:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14665_pi14-548_cl_pass1_tfrozen_src15.csv
[Wed May  1 11:07:32 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14665_pi14-548_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14665_pi14-548_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 11:49:39 2013] Spatial fit model total counts = 17.683400, observed total counts = 19.000000
[Wed May  1 11:49:39 2013] Offset between fit and detection position for source 6 = 0.099505 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.099505 pixels
  Position = (772.5, 1001.0) = 1 12 55.06 -72 35 41.3
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 17.7 +/- 4.2
  Background counts = 0.0
  Rate = 0.0004 +/- 9e-05
[Wed May  1 11:49:39 2013] Vigneting correction estimate = 1.000000
[Wed May  1 11:49:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 11:49:39 2013] Assessing source extent using major axis lower bound
[Wed May  1 11:49:39 2013] Source does appear to be extended
[Wed May  1 11:49:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 12:09:08 2013] Writing source region out to fullrun_ccd2_acisf14665_pi14-548_pass1_cl_src6_src.reg
[Wed May  1 12:09:08 2013] Extracting stamp from image fullrun_ccd2_acisf14665_pi14-548_cl_sm2.00.img.gz, (740, 968) - (805, 1034)
[Wed May  1 12:09:08 2013] Writing fullrun_ccd2_acisf14665_pi14-548_pass1_cl_src6.gif
[Wed May  1 12:17:38 2013] Size of ../../acisf14665/products/events/fullrun_ccd2_acisf14665_pi14-548_pass1_cl_src6_src.evt.gz[events] = 19 counts
[Wed May  1 12:17:38 2013] Mean chipx,y = (200.32, 602.95)
[Wed May  1 12:17:38 2013] Mean tdetx,y = (3663.95, 3885.68)
[Wed May  1 12:17:38 2013] chipx,y range = (179.00-216.00, 582.00-617.00)
[Wed May  1 12:17:38 2013] Size of ../../acisf14665/products/events/fullrun_ccd2_acisf14665_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 10 counts
[Wed May  1 12:17:39 2013] Not generating rmf since there are only 17 counts
[Wed May  1 12:17:39 2013] arf not found, will run specextract
[Wed May  1 12:18:05 2013] ../../acisf14665/products/spectra/fullrun_ccd2_acisf14665_pi14-548_pass1_cl_src6.warf not found
[Wed May  1 12:18:05 2013] ../../acisf14665/products/spectra/fullrun_ccd2_acisf14665_pi14-548_pass1_cl_src6.wrmf not found
[Wed May  1 12:18:05 2013] Removal of ../../acisf14665/products/spectra/fullrun_ccd2_acisf14665_pi14-548_pass1_cl_src6.soff failed
[Wed May  1 12:19:52 2013] Spectrum 6 has only 18 counts, deleting rmf
[Wed May  1 12:19:52 2013] 183.817
[Wed May  1 12:32:46 2013] Updating aperture counts using extracted products
[Wed May  1 12:32:46 2013] Total counts from fullrun_ccd2_acisf14665_pi14-548_pass1_cl_src6_src.pi.gz = 19.00
[Wed May  1 12:32:46 2013] Total counts from fullrun_ccd2_acisf14665_pi14-548_pass1_cl_src6_bgd.pi.gz = 10.00
[Wed May  1 12:32:46 2013] Got source and background scale factors 0.000002, 0.000019
[Wed May  1 12:32:46 2013] User source parameters:
  Position = (772.5, 1001.0) = 1 12 55.06 -72 35 41.3
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source aperture counts = 18.2 +/- 5.4
  Background aperture counts = 0.8
  Rate = 0.0004 +/- 0.0001

[Wed May  1 12:32:47 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 12:32:47 2013] Using photon index=1.80, rate=0.00037, arf fullrun_ccd2_acisf14665_pi14-548_pass1_cl_src6.arf
[Wed May  1 12:32:47 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  1 12:32:47 2013] Updating source flux to 4.8e-15
[Wed May  1 12:33:03 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting