[Mon Jul 23 17:57:00 2012] Detection parameters:
  Position = (521.6, 439.8) = 2 56 35.02 -56 21 16.4
  Extent = 1.4" x 1.0", rotation angle = 149 degrees
  Source counts = 25.9 +/- 5.3
  Background counts = 2.1
  Rate = 0.001 +/- 0.0002

[Mon Jul 23 17:57:00 2012] Off-axis axis estimate = 6.80'
[Mon Jul 23 19:16:04 2012] Using EEF radius (= 2.06 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 19:16:04 2012] Initial guess for spatial extent in simple fitting = 2.06"
[Mon Jul 23 19:16:04 2012] source mask rpix=4.2, npix_max = 88, mask sum = 90, frac = 1.021
[Mon Jul 23 19:16:04 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 2.06"
[Mon Jul 23 19:27:37 2012] fullrun_ccd3_acisf14448_pi14-548_cl_pass0_src5.ximg exists
[Mon Jul 23 19:27:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14448_pi14-548_cl_pass0_src5.csv
[Mon Jul 23 19:27:37 2012] fullrun_ccd3_acisf14448_pi14-548_cl_pass0_src5_1.ximg exists
[Mon Jul 23 19:27:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14448_pi14-548_cl_pass0_src5.csv
[Mon Jul 23 19:27:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14448_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14448_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 19:27:37 2012] fullrun_ccd3_acisf14448_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Mon Jul 23 19:27:37 2012] fullrun_ccd3_acisf14448_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jul 23 19:27:37 2012] Fit fullrun_ccd3_acisf14448_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Jul 23 19:41:38 2012] Spatial fit model total counts = 29.520900, observed total counts = 31.000000
[Mon Jul 23 19:41:38 2012] Offset between fit and detection position for source 12 = 0.986128 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.986128 pixels
  Position = (522.6, 439.7) = 2 56 34.99 -56 21 16.7
  Extent = 1.8 (1.6-2.1)", rotation angle = 0
  Source counts = 29.4 +/- 5.4
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Mon Jul 23 19:41:38 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 19:41:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 19:41:38 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 19:41:38 2012] Source does appear to be extended
[Mon Jul 23 19:41:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 20:49:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 20:49:53 2012] Initial guess for spatial extent in simple fitting = 1.75"
[Mon Jul 23 20:49:53 2012] source mask rpix=3.6, npix_max = 65, mask sum = 64, frac = 0.970
[Mon Jul 23 20:49:53 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 1.75"
[Mon Jul 23 21:01:25 2012] fullrun_ccd3_acisf14448_pi14-548_cl_pass1_src5.ximg exists
[Mon Jul 23 21:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14448_pi14-548_cl_pass1_src5.csv
[Mon Jul 23 21:01:25 2012] fullrun_ccd3_acisf14448_pi14-548_cl_pass1_src5_1.ximg exists
[Mon Jul 23 21:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14448_pi14-548_cl_pass1_src5.csv
[Mon Jul 23 21:01:25 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14448_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14448_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 21:01:25 2012] fullrun_ccd3_acisf14448_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Mon Jul 23 21:01:25 2012] fullrun_ccd3_acisf14448_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jul 23 21:01:25 2012] Fit fullrun_ccd3_acisf14448_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Jul 23 21:17:13 2012] Spatial fit model total counts = 32.462100, observed total counts = 29.000000
[Mon Jul 23 21:17:13 2012] Offset between fit and detection position for source 12 = 2.187583 pixels
[Mon Jul 23 21:17:13 2012] 33.348700 total counts/ 17.179900 bgd. counts: snr = 3.900924
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 2.187583 pixels
  Position = (524.6, 438.8) = 2 56 34.88 -56 21 17.2
  Extent = 0.5" x 0.5", rotation angle = 0
  Source counts = 16.2 +/- 5.8
  Background counts = 17.2
  Rate = 0.0006 +/- 0.0002
[Mon Jul 23 21:17:13 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 21:17:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 21:17:13 2012] Assessing source extent using major
[Mon Jul 23 21:17:13 2012] Source does appear to be extended
[Mon Jul 23 21:17:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 21:37:02 2012] Writing source region out to fullrun_ccd3_acisf14448_pi14-548_pass1_cl_src12_src.reg
[Mon Jul 23 21:37:02 2012] Extracting stamp from image fullrun_ccd3_acisf14448_pi14-548_cl_sm2.00.img.gz, (502, 416) - (547, 461)
[Mon Jul 23 21:37:02 2012] Writing fullrun_ccd3_acisf14448_pi14-548_pass1_cl_src12.gif
[Mon Jul 23 21:38:54 2012] Size of ../../acisf14448/products/events/fullrun_ccd3_acisf14448_pi14-548_pass1_cl_src12_src.evt.gz[events] = 12 counts
[Mon Jul 23 21:38:54 2012] Mean chipx,y = (378.50, 224.25)
[Mon Jul 23 21:38:54 2012] Mean tdetx,y = (4907.75, 3439.50)
[Mon Jul 23 21:38:54 2012] chipx,y range = (366.00-400.00, 212.00-241.00)
[Mon Jul 23 21:38:54 2012] Size of ../../acisf14448/products/events/fullrun_ccd3_acisf14448_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 8 counts
[Mon Jul 23 21:38:55 2012] Not generating rmf since there are only 16 counts
[Mon Jul 23 21:38:55 2012] arf not found, will run specextract
[Mon Jul 23 21:39:14 2012] ../../acisf14448/products/spectra/fullrun_ccd3_acisf14448_pi14-548_pass1_cl_src12.warf not found
[Mon Jul 23 21:39:14 2012] ../../acisf14448/products/spectra/fullrun_ccd3_acisf14448_pi14-548_pass1_cl_src12.wrmf not found
[Mon Jul 23 21:39:14 2012] Removal of ../../acisf14448/products/spectra/fullrun_ccd3_acisf14448_pi14-548_pass1_cl_src12.soff failed
[Mon Jul 23 21:46:38 2012] Spectrum 12 has only 16 counts, deleting rmf
[Mon Jul 23 21:46:38 2012] 177.028
[Mon Jul 23 21:48:05 2012] Updating aperture counts using extracted products
[Mon Jul 23 21:48:05 2012] Error reading totcts from fullrun_ccd3_acisf14448_pi14-548_pass1_cl_src12_src.pi.gz
[Mon Jul 23 21:48:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 21:48:05 2012] Using photon index=1.80, rate=0.000631, arf fullrun_ccd3_acisf14448_pi14-548_pass1_cl_src12.arf
[Mon Jul 23 21:48:05 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jul 23 21:48:05 2012] Updating source flux to 8.8e-15
[Mon Jul 23 21:48:26 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jul 23 21:48:27 2012] acisf14448/analysis//spectral/fullrun_ccd3_acisf14448_pi14-548_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete