[Sat Jun  8 05:27:59 2013] Detection parameters:
  Position = (283.3, 580.2) = 15 54 18.63 -55 9 54.2
  Extent = 0.9" x 0.5", rotation angle = 95 degrees
  Source counts = 22.1 +/- 4.8
  Background counts = 0.9
  Rate = 0.0006 +/- 0.0001

[Sat Jun  8 05:27:59 2013] Off-axis axis estimate = 4.89'
[Sat Jun  8 05:51:07 2013] Using EEF radius (= 1.14 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 05:51:07 2013] Initial guess for spatial extent in simple fitting = 1.14"
[Sat Jun  8 05:51:07 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.138
[Sat Jun  8 05:51:07 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 1.14"
[Sat Jun  8 06:13:29 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass0_src7.ximg exists
[Sat Jun  8 06:13:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14430_pi14-548_cl_pass0_src7.csv
[Sat Jun  8 06:13:29 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass0_src7_1.ximg exists
[Sat Jun  8 06:13:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14430_pi14-548_cl_pass0_src7.csv
[Sat Jun  8 06:13:29 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14430_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14430_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 06:13:29 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sat Jun  8 06:13:29 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Jun  8 06:13:29 2013] Fit fullrun_ccd1_acisf14430_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Jun  8 06:51:02 2013] Spatial fit model total counts = 23.910100, observed total counts = 26.000000
[Sat Jun  8 06:51:02 2013] Offset between fit and detection position for source 5 = 0.799364 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.799364 pixels
  Position = (283.8, 580.8) = 15 54 18.63 -55 9 54.1
  Extent = 1.3 (0.9-1.7)" x 0.5 (0.3-0.6)", rotation angle = 82 (72-95) degrees
  Source counts = 23.1 +/- 4.8
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sat Jun  8 06:51:02 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 06:51:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 06:51:02 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 06:51:02 2013] Source does appear to be extended
[Sat Jun  8 06:51:02 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.54
[Sat Jun  8 06:51:02 2013] Source is asymmetric
[Sat Jun  8 07:07:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  8 07:07:39 2013] Initial guess for spatial extent in simple fitting = 0.85"
[Sat Jun  8 07:07:39 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.800
[Sat Jun  8 07:07:39 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 0.85"
[Sat Jun  8 07:28:50 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass1_src7.ximg exists
[Sat Jun  8 07:28:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14430_pi14-548_cl_pass1_src7.csv
[Sat Jun  8 07:28:50 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass1_src7_1.ximg exists
[Sat Jun  8 07:28:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14430_pi14-548_cl_pass1_src7.csv
[Sat Jun  8 07:28:50 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14430_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14430_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 07:28:50 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sat Jun  8 07:28:50 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Jun  8 07:28:50 2013] Fit fullrun_ccd1_acisf14430_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Jun  8 07:56:41 2013] Spatial fit model total counts = 23.766000, observed total counts = 26.000000
[Sat Jun  8 07:56:41 2013] Offset between fit and detection position for source 5 = 0.026822 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.026822 pixels
  Position = (283.8, 580.8) = 15 54 18.63 -55 9 54.1
  Extent = 1.3 (0.9-1.7)" x 0.5 (0.4-0.5)", rotation angle = 84 (72-95) degrees
  Source counts = 23.0 +/- 4.8
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sat Jun  8 07:56:41 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 07:56:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 07:56:41 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 07:56:41 2013] Source does appear to be extended
[Sat Jun  8 07:56:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.00
[Sat Jun  8 07:56:41 2013] Source is asymmetric
[Sat Jun  8 08:01:12 2013] Writing source region out to fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src5_src.reg
[Sat Jun  8 08:01:12 2013] Extracting stamp from image fullrun_ccd1_acisf14430_pi14-548_cl_sm2.00.img.gz, (226, 523) - (342, 639)
[Sat Jun  8 08:01:12 2013] Writing fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src5.gif
[Sat Jun  8 08:04:50 2013] Size of ../../acisf14430/products/events/fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src5_src.evt.gz[events] = 24 counts
[Sat Jun  8 08:04:50 2013] Mean chipx,y = (458.79, 783.96)
[Sat Jun  8 08:04:50 2013] Mean tdetx,y = (4348.04, 4565.79)
[Sat Jun  8 08:04:50 2013] chipx,y range = (439.00-476.00, 764.00-797.00)
[Sat Jun  8 08:04:50 2013] Size of ../../acisf14430/products/events/fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 36 counts
[Sat Jun  8 08:04:51 2013] Not generating rmf since there are only 23 counts
[Sat Jun  8 08:04:51 2013] arf not found, will run specextract
[Sat Jun  8 08:05:15 2013] ../../acisf14430/products/spectra/fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src5.warf not found
[Sat Jun  8 08:05:15 2013] ../../acisf14430/products/spectra/fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src5.wrmf not found
[Sat Jun  8 08:05:15 2013] Removal of ../../acisf14430/products/spectra/fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src5.soff failed
[Sat Jun  8 08:15:01 2013] Spectrum 5 has only 23 counts, deleting rmf
[Sat Jun  8 08:15:01 2013] 191.154
[Sat Jun  8 08:36:55 2013] Updating aperture counts using extracted products
[Sat Jun  8 08:36:55 2013] Total counts from fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src5_src.pi.gz = 24.00
[Sat Jun  8 08:36:55 2013] Total counts from fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src5_bgd.pi.gz = 36.00
[Sat Jun  8 08:36:55 2013] Got source and background scale factors 0.000002, 0.000058
[Sat Jun  8 08:36:55 2013] User source parameters:
  Position = (283.8, 580.8) = 15 54 18.63 -55 9 54.1
  Extent = 1.3 (0.9-1.7)" x 0.5 (0.4-0.5)", rotation angle = 84 (72-95) degrees
  Source aperture counts = 22.9 +/- 6.0
  Background aperture counts = 1.1
  Rate = 0.0006 +/- 0.0002

[Sat Jun  8 08:36:57 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 08:36:57 2013] Using photon index=1.80, rate=0.000629, arf fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src5.arf
[Sat Jun  8 08:36:57 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jun  8 08:36:57 2013] Updating source flux to 1e-14
[Sat Jun  8 08:37:10 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting