[Sat Jun  8 05:27:59 2013] Detection parameters:
  Position = (427.9, 943.5) = 15 54 10.36 -55 6 55.3
  Extent = 0.7" x 0.5", rotation angle = 93 degrees
  Source counts = 13.2 +/- 3.7
  Background counts = 0.8
  Rate = 0.0004 +/- 0.0001

[Sat Jun  8 05:27:59 2013] Off-axis axis estimate = 3.68'
[Sat Jun  8 05:51:07 2013] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 05:51:07 2013] Initial guess for spatial extent in simple fitting = 0.74"
[Sat Jun  8 05:51:07 2013] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.245
[Sat Jun  8 05:51:07 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 0.74"
[Sat Jun  8 06:13:29 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass0_src14.ximg exists
[Sat Jun  8 06:13:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14430_pi14-548_cl_pass0_src14.csv
[Sat Jun  8 06:13:29 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass0_src14_1.ximg exists
[Sat Jun  8 06:13:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14430_pi14-548_cl_pass0_src14.csv
[Sat Jun  8 06:13:29 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14430_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14430_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 06:13:29 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Sat Jun  8 06:13:29 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jun  8 06:13:29 2013] Fit fullrun_ccd1_acisf14430_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Jun  8 06:51:02 2013] Spatial fit model total counts = 18.363700, observed total counts = 19.000000
[Sat Jun  8 06:51:02 2013] Offset between fit and detection position for source 11 = 1.106766 pixels
[Sat Jun  8 06:51:02 2013] 19.087610 total counts/ 7.582910 bgd. counts: snr = 4.177893
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.106766 pixels
  Position = (428.4, 944.5) = 15 54 10.36 -55 6 55.1
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 11.5 +/- 4.4
  Background counts = 7.6
  Rate = 0.0003 +/- 0.0001
[Sat Jun  8 06:51:02 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 06:51:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 06:51:02 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 06:51:02 2013] Source does appear to be extended
[Sat Jun  8 06:51:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 07:07:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  8 07:07:39 2013] Initial guess for spatial extent in simple fitting = 0.50"
[Sat Jun  8 07:07:39 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.983
[Sat Jun  8 07:07:39 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 0.50"
[Sat Jun  8 07:28:50 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass1_src13.ximg exists
[Sat Jun  8 07:28:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14430_pi14-548_cl_pass1_src13.csv
[Sat Jun  8 07:28:50 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass1_src13_1.ximg exists
[Sat Jun  8 07:28:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14430_pi14-548_cl_pass1_src13.csv
[Sat Jun  8 07:28:50 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14430_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14430_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 07:28:50 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sat Jun  8 07:28:50 2013] fullrun_ccd1_acisf14430_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Jun  8 07:28:50 2013] Fit fullrun_ccd1_acisf14430_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Jun  8 07:56:41 2013] Spatial fit model total counts = 17.361300, observed total counts = 18.000000
[Sat Jun  8 07:56:41 2013] Offset between fit and detection position for source 11 = 0.051032 pixels
[Sat Jun  8 07:56:41 2013] 17.916310 total counts/ 6.595310 bgd. counts: snr = 4.408260
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.051032 pixels
  Position = (428.4, 944.5) = 15 54 10.36 -55 6 55.1
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 11.3 +/- 4.2
  Background counts = 6.6
  Rate = 0.0003 +/- 0.0001
[Sat Jun  8 07:56:41 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 07:56:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 07:56:41 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 07:56:41 2013] Source does appear to be extended
[Sat Jun  8 07:56:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 08:01:12 2013] Writing source region out to fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src11_src.reg
[Sat Jun  8 08:01:12 2013] Extracting stamp from image fullrun_ccd1_acisf14430_pi14-548_cl_sm2.00.img.gz, (407, 923) - (449, 966)
[Sat Jun  8 08:01:12 2013] Writing fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src11.gif
[Sat Jun  8 08:08:46 2013] Size of ../../acisf14430/products/events/fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src11_src.evt.gz[events] = 13 counts
[Sat Jun  8 08:08:46 2013] Mean chipx,y = (102.38, 613.15)
[Sat Jun  8 08:08:46 2013] Mean tdetx,y = (4518.85, 4209.38)
[Sat Jun  8 08:08:46 2013] chipx,y range = (89.00-123.00, 595.00-628.00)
[Sat Jun  8 08:08:46 2013] Size of ../../acisf14430/products/events/fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 10 counts
[Sat Jun  8 08:08:47 2013] Not generating rmf since there are only 11 counts
[Sat Jun  8 08:08:47 2013] arf not found, will run specextract
[Sat Jun  8 08:09:16 2013] ../../acisf14430/products/spectra/fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src11.warf not found
[Sat Jun  8 08:09:16 2013] ../../acisf14430/products/spectra/fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src11.wrmf not found
[Sat Jun  8 08:09:16 2013] Removal of ../../acisf14430/products/spectra/fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src11.soff failed
[Sat Jun  8 08:15:01 2013] Spectrum 11 has only 11 counts, deleting rmf
[Sat Jun  8 08:15:01 2013] 192.497
[Sat Jun  8 08:36:56 2013] Updating aperture counts using extracted products
[Sat Jun  8 08:36:56 2013] Total counts from fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src11_src.pi.gz = 13.00
[Sat Jun  8 08:36:56 2013] Total counts from fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src11_bgd.pi.gz = 10.00
[Sat Jun  8 08:36:56 2013] Got source and background scale factors 0.000001, 0.000008
[Sat Jun  8 08:36:56 2013] User source parameters:
  Position = (428.4, 944.5) = 15 54 10.36 -55 6 55.1
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source aperture counts = 12.2 +/- 4.7
  Background aperture counts = 0.8
  Rate = 0.0003 +/- 0.0001

[Sat Jun  8 08:36:58 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 08:36:58 2013] Using photon index=1.80, rate=0.000309, arf fullrun_ccd1_acisf14430_pi14-548_pass1_cl_src11.arf
[Sat Jun  8 08:36:58 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jun  8 08:36:58 2013] Updating source flux to 5.2e-15
[Sat Jun  8 08:37:10 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting