[Wed Aug  1 09:29:17 2012] Detection parameters:
  Position = (733.7, 292.3) = 15 1 13.28 -41 59 33.9
  Extent = 0.8" x 0.6", rotation angle = 84 degrees
  Source counts = 33.0 +/- 5.8
  Background counts = 1.0
  Rate = 0.001 +/- 0.0002

[Wed Aug  1 09:29:17 2012] Off-axis axis estimate = 5.88'
[Wed Aug  1 10:15:17 2012] Using EEF radius (= 1.57 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 10:15:17 2012] Initial guess for spatial extent in simple fitting = 1.57"
[Wed Aug  1 10:15:17 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.896
[Wed Aug  1 10:15:17 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 1.57"
[Wed Aug  1 10:31:00 2012] fullrun_ccd3_acisf14424_pi14-548_cl_pass0_src3.ximg exists
[Wed Aug  1 10:31:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14424_pi14-548_cl_pass0_src3.csv
[Wed Aug  1 10:31:00 2012] fullrun_ccd3_acisf14424_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Aug  1 10:31:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14424_pi14-548_cl_pass0_src3.csv
[Wed Aug  1 10:31:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14424_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14424_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 10:31:01 2012] fullrun_ccd3_acisf14424_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug  1 10:31:01 2012] fullrun_ccd3_acisf14424_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug  1 10:31:01 2012] Fit fullrun_ccd3_acisf14424_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Aug  1 10:31:10 2012] Spatial fit model total counts = 44.986300, observed total counts = 45.000000
[Wed Aug  1 10:31:10 2012] Offset between fit and detection position for source 31 = 0.485074 pixels
[Wed Aug  1 10:31:10 2012] 45.477800 total counts/ 12.705200 bgd. counts: snr = 9.194331
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.485074 pixels
  Position = (734.2, 292.4) = 15 1 13.28 -41 59 34.1
  Extent = 1.0 (0.7-1.5)", rotation angle = 0
  Source counts = 32.8 +/- 6.7
  Background counts = 12.7
  Rate = 0.001 +/- 0.0003
[Wed Aug  1 10:31:10 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 10:31:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 10:31:10 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 10:31:10 2012] Source does appear to be extended
[Wed Aug  1 10:31:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 11:04:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  1 11:04:06 2012] Initial guess for spatial extent in simple fitting = 1.00"
[Wed Aug  1 11:04:06 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.978
[Wed Aug  1 11:04:06 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 1.00"
[Wed Aug  1 11:18:00 2012] fullrun_ccd3_acisf14424_pi14-548_cl_pass1_src3.ximg exists
[Wed Aug  1 11:18:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14424_pi14-548_cl_pass1_src3.csv
[Wed Aug  1 11:18:00 2012] fullrun_ccd3_acisf14424_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Aug  1 11:18:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14424_pi14-548_cl_pass1_src3.csv
[Wed Aug  1 11:18:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14424_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14424_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 11:18:00 2012] fullrun_ccd3_acisf14424_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug  1 11:18:00 2012] fullrun_ccd3_acisf14424_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug  1 11:18:00 2012] Fit fullrun_ccd3_acisf14424_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Aug  1 11:18:07 2012] Spatial fit model total counts = 40.451800, observed total counts = 42.000000
[Wed Aug  1 11:18:07 2012] Offset between fit and detection position for source 31 = 0.716588 pixels
[Wed Aug  1 11:18:07 2012] 41.183281 total counts/ 0.156181 bgd. counts: snr = 103.814190
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.716588 pixels
  Position = (734.5, 291.8) = 15 1 13.26 -41 59 34.5
  Extent = 1.2 (0.8-1.5)", rotation angle = 0
  Source counts = 41.0 +/- 6.4
  Background counts = 0.2
  Rate = 0.002 +/- 0.0003
[Wed Aug  1 11:18:07 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 11:18:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 11:18:07 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 11:18:07 2012] Source does appear to be extended
[Wed Aug  1 11:18:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 11:33:37 2012] Writing source region out to fullrun_ccd3_acisf14424_pi14-548_pass1_cl_src31_src.reg
[Wed Aug  1 11:33:37 2012] Extracting stamp from image fullrun_ccd3_acisf14424_pi14-548_cl_sm2.00.img.gz, (680, 237) - (789, 347)
[Wed Aug  1 11:33:37 2012] Writing fullrun_ccd3_acisf14424_pi14-548_pass1_cl_src31.gif
[Wed Aug  1 11:34:29 2012] Size of ../../acisf14424/products/events/fullrun_ccd3_acisf14424_pi14-548_pass1_cl_src31_src.evt.gz[events] = 44 counts
[Wed Aug  1 11:34:29 2012] Mean chipx,y = (846.61, 303.98)
[Wed Aug  1 11:34:29 2012] Mean tdetx,y = (4828.02, 3907.61)
[Wed Aug  1 11:34:29 2012] chipx,y range = (828.00-870.00, 287.00-328.00)
[Wed Aug  1 11:34:29 2012] Size of ../../acisf14424/products/events/fullrun_ccd3_acisf14424_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 23 counts
[Wed Aug  1 11:34:30 2012] Not generating rmf since there are only 41 counts
[Wed Aug  1 11:34:30 2012] arf not found, will run specextract
[Wed Aug  1 11:34:56 2012] ../../acisf14424/products/spectra/fullrun_ccd3_acisf14424_pi14-548_pass1_cl_src31.warf not found
[Wed Aug  1 11:34:56 2012] ../../acisf14424/products/spectra/fullrun_ccd3_acisf14424_pi14-548_pass1_cl_src31.wrmf not found
[Wed Aug  1 11:34:56 2012] Removal of ../../acisf14424/products/spectra/fullrun_ccd3_acisf14424_pi14-548_pass1_cl_src31.soff failed
[Wed Aug  1 11:41:01 2012] Spectrum 31 has only 41 counts, deleting rmf
[Wed Aug  1 11:41:01 2012] 184.134
[Wed Aug  1 11:41:04 2012] Updating aperture counts using extracted products
[Wed Aug  1 11:41:04 2012] Error reading totcts from fullrun_ccd3_acisf14424_pi14-548_pass1_cl_src31_src.pi.gz
[Wed Aug  1 11:41:04 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 11:41:04 2012] Using photon index=1.80, rate=0.00162, arf fullrun_ccd3_acisf14424_pi14-548_pass1_cl_src31.arf
[Wed Aug  1 11:41:04 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Aug  1 11:41:04 2012] Updating source flux to 2e-14
[Wed Aug  1 11:41:12 2012] Source 31 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Aug  1 11:41:13 2012] acisf14424/analysis//spectral/fullrun_ccd3_acisf14424_pi14-548_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete